Re: [PATCH net-next 09/13] net: mvpp2: dynamic reconfiguration of the PHY mode

[Antoine Tenart]

On Thu, Aug 24, 2017 at 06:04:01PM +0100, Russell King - ARM Linux wrote:
> On Thu, Aug 24, 2017 at 06:57:43PM +0200, Andrew Lunn wrote:
> > > I see what could be the issue but I do not understand one aspect though:
> > > how could we switch from one PHY to another, as there's only one output
> > > between the SoC (and so a given GoP#) and the board. So if a given PHY
> > > can handle multiple modes I see, but in the other case a muxing
> > > somewhere would be needed? Or did I miss something?
> > 
> > I think we need a hardware diagram...
> > 
> > How are the RJ45, copper PHY, SFP module connected to the SoC?
> > 
> > Somewhere there must be a mux, to select between copper and
> > fibre. Where is that mux?
> 
> In the 88x3310 PHY:
> 
>                      .------- RJ45
> MVPP2 ----- 88x3310 PHY
>                      `------- SFP+

And the "MVPP2" part can be expended to:

        .-- GoP #0 --.
MVPP2 ----- GoP #1 ---- Comphy lane #X -- 88x3310
        `-- GoP #2 --'

Thanks!
Antoine

-- 
Antoine Ténart, Free Electrons
Embedded Linux and Kernel engineering
http://free-electrons.com

Attachment: signature.asc
Description: PGP signature