[PATCH 11/11 v3] staging: typec: tcpm: Switch to PORT_RESET instead of SNK_UNATTACHED

[Badhri Jagan Sridharan]

When VBUS is not discovered within PD_T_PS_SOURCE_ON although Rp
is detected on CC, TCPM switches the port to SNK_UNATTACHED
state. SNK_UNATTACHED, however does not force TYPEC_CC_OPEN which
makes the partner(source) to think that it is connected.

To overcome this issue, force the port into PORT_RESET state
to make sure the CC lines are open.

Signed-off-by: Badhri Jagan Sridharan <Badhri@xxxxxxxxxx>
Reviewed-by: Guenter Roeck <linux@xxxxxxxxxxxx>
---
Changelog since previous version:
- Only one previous version of the patch was sent.
  Numbering this V3 instead of V2 to keep the sequence
  number in sync with the rest of the patches in the
  patch list.
- added Reviewed-by: Guenter Roeck <linux@xxxxxxxxxxxx>
- fixed version/sequence numbers

 drivers/staging/typec/tcpm.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/drivers/staging/typec/tcpm.c b/drivers/staging/typec/tcpm.c
index 9e0111dea7c4..47b8fec5ea36 100644
--- a/drivers/staging/typec/tcpm.c
+++ b/drivers/staging/typec/tcpm.c
@@ -2380,7 +2380,7 @@ static void run_state_machine(struct tcpm_port *port)
 				       0);
 		else
 			/* Wait for VBUS, but not forever */
-			tcpm_set_state(port, SNK_UNATTACHED, PD_T_PS_SOURCE_ON);
+			tcpm_set_state(port, PORT_RESET, PD_T_PS_SOURCE_ON);
 		break;
 
 	case SRC_TRY:
-- 
2.14.1.342.g6490525c54-goog