Re: [PATCH v4 3/4] dt-bindings: PCI: rockchip: Add support for pcie wake irq

From: Rob Herring
Date: Mon Aug 28 2017 - 17:33:23 EST


On Fri, Aug 25, 2017 at 1:20 PM, Brian Norris <briannorris@xxxxxxxxxxxx> wrote:
> On Fri, Aug 25, 2017 at 01:14:39PM -0500, Rob Herring wrote:
>> On Tue, Aug 22, 2017 at 11:19:33AM +0800, Jeffy Chen wrote:
>> > Add an optional interrupt for PCIE_WAKE pin.
>> >
>> > Signed-off-by: Jeffy Chen <jeffy.chen@xxxxxxxxxxxxxx>
>> > ---
>> >
>> > Changes in v4: None
>> > Changes in v3: None
>> > Changes in v2: None
>> >
>> > .../devicetree/bindings/pci/rockchip-pcie.txt | 20 ++++++++++++--------
>> > 1 file changed, 12 insertions(+), 8 deletions(-)
>> >
>> > diff --git a/Documentation/devicetree/bindings/pci/rockchip-pcie.txt b/Documentation/devicetree/bindings/pci/rockchip-pcie.txt
>> > index 5678be82530d..9f6504129e80 100644
>> > --- a/Documentation/devicetree/bindings/pci/rockchip-pcie.txt
>> > +++ b/Documentation/devicetree/bindings/pci/rockchip-pcie.txt
>> > @@ -20,10 +20,13 @@ Required properties:
>> > - msi-map: Maps a Requester ID to an MSI controller and associated
>> > msi-specifier data. See ./pci-msi.txt
>> > - interrupts: Three interrupt entries must be specified.
>> > -- interrupt-names: Must include the following names
>> > - - "sys"
>> > - - "legacy"
>> > - - "client"
>> > +- interrupt-names: Include the following names
>> > + Required:
>> > + - "sys"
>> > + - "legacy"
>> > + - "client"
>> > + Optional:
>> > + - "wake"
>>
>> Use the wakeup source binding:
>> Documentation/devicetree/bindings/power/wakeup-source.txt
>
> And I suppose this means we'd fall under this paragraph?
>
> "However if the devices have dedicated interrupt as the wakeup source
> then they need to specify/identify the same using device specific
> interrupt name. In such cases only that interrupt can be used as wakeup
> interrupt."
>
> We don't expect *any* interrupt to qualify as PCI WAKE#; so we should
> still also document the interrupt name ("wake"?) in
> Documentation/devicetree/bindings/pci/pci.txt as Bjorn suggested, in
> addition to using the 'wakeup-source' property documented there.

I believe the defined interrupt name is "wakeup" as example 1 shows.

Rob