Re: dt-bindings: power: supply: bq27xxx: Add monitored-battery documentation

[H. Nikolaus Schaller]

Hi Liam,

> Am 29.08.2017 um 20:18 schrieb Liam Breck <liam@xxxxxxxxxxxxxxxxx>:
> 
> Hi Nikolaus, thanks for the testing report...
> 
> On Tue, Aug 29, 2017 at 7:24 AM, H. Nikolaus Schaller <hns@xxxxxxxxxxxxx> wrote:
>> Hi Liam,
>> seems to work as expected :)
>> 
>> First boot:
>> 
>> [    6.096336] bq27xxx_battery_settings
>> [    6.097987] bq27xxx_battery_set_config
>> [    6.097990] bq27xxx_battery_unseal
>> [    6.107987] bq27xxx-battery 1-0055: update design-capacity to 6000
>> [    6.107992] bq27xxx-battery 1-0055: update design-energy to 22200
>> [    6.107997] bq27xxx-battery 1-0055: terminate-voltage has 3200
>> [    6.382048] bq27xxx-battery 1-0055: cfgupdate 0, retries 7
>> [    6.382054] bq27xxx_battery_seal
>> 
>> Second boot (w/o removing battery in between):
>> 
>> [    6.008883] bq27xxx_battery_settings
>> [    6.013280] bq27xxx_battery_set_config
>> [    6.018761] bq27xxx_battery_unseal
>> [    6.050694] bq27xxx-battery 1-0055: design-capacity has 6000
>> [    6.059913] bq27xxx-battery 1-0055: design-energy has 22200
>> [    6.067113] bq27xxx-battery 1-0055: terminate-voltage has 3200
>> [    6.075803] bq27xxx_battery_seal
> 
> I'd be interested to hear what happens after poweroff & boot (ie does
> it retain config)?

second boot was simple poweroff + reboot and it changes from "update design-capacity" to "design-capacity has"
which IMHO means that the bq27421 did retain settings and was therefore not reprogrammed.

> 
> 
>> Third boot (with removing battery in between):
>> 
>> [    6.161085] bq27xxx_battery_settings
>> [    6.161162] bq27xxx_battery_set_config
>> [    6.161165] bq27xxx_battery_unseal
>> [    6.177904] bq27xxx-battery 1-0055: update design-capacity to 6000
>> [    6.177909] bq27xxx-battery 1-0055: update design-energy to 22200
>> [    6.177914] bq27xxx-battery 1-0055: terminate-voltage has 3200
>> [    6.440592] bq27xxx-battery 1-0055: cfgupdate 0, retries 7
>> [    6.440597] bq27xxx_battery_seal

this was with removing all power which makes the bq27421 loosing the settings.
And next reboot does another "update design-capacity".

>> 
>> (I have added some printk to trace seal/unseal etc.)
>> 
>> Values match the 6000mAh specified by DT:
>> 
>>        bat: battery {
>>                compatible = "simple-battery", "pyra-battery";
>>                voltage-min-design-microvolt = <3200000>;
>>                energy-full-design-microwatt-hours = <22200000>;
>>                charge-full-design-microamp-hours = <6000000>;
>>        };
>> 
>> root@letux:~# cat /sys/class/power_supply/bq27421-0/uevent
>> POWER_SUPPLY_NAME=bq27421-0
>> POWER_SUPPLY_STATUS=Discharging
>> POWER_SUPPLY_PRESENT=1
>> POWER_SUPPLY_VOLTAGE_NOW=3943000
>> POWER_SUPPLY_CURRENT_NOW=-634000
>> POWER_SUPPLY_CAPACITY=82
>> POWER_SUPPLY_CAPACITY_LEVEL=Normal
>> POWER_SUPPLY_TEMP=319
>> POWER_SUPPLY_TECHNOLOGY=Li-ion
>> POWER_SUPPLY_CHARGE_FULL=5467000
>> POWER_SUPPLY_CHARGE_NOW=4611000
>> POWER_SUPPLY_CHARGE_FULL_DESIGN=6000000
>> POWER_SUPPLY_MANUFACTURER=Texas Instruments
>> root@letux:~#
>> 
>> Anything else I should test?
> 
> Could you also test voltage-min-design-microvolt at 3177 to make sure
> that's configurable too?

Yes:

	bat: battery {
		compatible = "simple-battery", "pyra-battery";
		voltage-min-design-microvolt = <3177000>;
		energy-full-design-microwatt-hours = <22200000>;
		charge-full-design-microamp-hours = <6000000>;
	};

gives

[    6.241009] bq27xxx_battery_settings
[    6.241055] bq27xxx_battery_set_config
[    6.241058] bq27xxx_battery_unseal
[    6.257073] bq27xxx-battery 1-0055: update design-capacity to 6000
[    6.257078] bq27xxx-battery 1-0055: update design-energy to 22200
[    6.257084] bq27xxx-battery 1-0055: update terminate-voltage to 3177
[    6.379230] bq27xxx_battery_seal

So it looks good.

> Sebastian just queued my series to -next. Would you be inclined to
> submit a new patch enabling bq27421? If so, the sooner the better
> since merge window is imminent :-)

I already have a patch for that...

BR and thanks,
Nikolaus

> 
> Liam
> 
> 
>> 
>> 
>>> Am 29.08.2017 um 12:40 schrieb Liam Breck <liam@xxxxxxxxxxxxxxxxx>:
>>> 
>>> Hi Nikolaus,
>>> 
>>> You need the patchset which enables this feature, which was delayed
>>> for further work. It's now ready...
>>> 
>>> https://patchwork.kernel.org/patch/9918947/
>>> https://patchwork.kernel.org/patch/9918949/
>>> https://patchwork.kernel.org/patch/9918951/
>>> https://patchwork.kernel.org/patch/9918953/
>>> https://patchwork.kernel.org/patch/9918955/
>>> 
>>> And flip the #if 0 protecting bq27421_dm_regs
>>> 
>>> I'd love to support that chip in this patchset if you can test
>>> non-default settings for all 3 options this week?
>>> 
>>> Thanks,
>>> Liam
>>> 
>>> 
>>> On Tue, Aug 29, 2017 at 2:43 AM, H. Nikolaus Schaller <hns@xxxxxxxxxxxxx> wrote:
>>>> Hi,
>>>> I am trying to get this working on our bq27421.
>>>> 
>>>> But the only message I get is:
>>>> 
>>>> [    6.086407] bq27xxx-battery 1-0055: data memory update not supported for chip
>>>> 
>>>> A little research shows that this message comes from
>>>> 
>>>>       http://elixir.free-electrons.com/linux/v4.13-rc7/source/drivers/power/supply/bq27xxx_battery.c#L1279
>>>> 
>>>> So di->dm_regs is NULL.
>>>> 
>>>> But doing an fgrep for dm_regs shows no line of code where the pointer is set to a non-null value:
>>>> 
>>>> master hns$ fgrep -R dm_regs *
>>>> drivers/power/supply/bq27xxx_battery.c: .class = (di)->dm_regs[i].subclass_id, \
>>>> drivers/power/supply/bq27xxx_battery.c: .block = (di)->dm_regs[i].offset / BQ27XXX_DM_SZ, \
>>>> drivers/power/supply/bq27xxx_battery.c: struct bq27xxx_dm_reg *reg = &di->dm_regs[reg_id];
>>>> drivers/power/supply/bq27xxx_battery.c: if (!di->dm_regs) {
>>>> drivers/power/supply/bq27xxx_battery.c: max = di->dm_regs[BQ27XXX_DM_DESIGN_ENERGY].max;
>>>> drivers/power/supply/bq27xxx_battery.c: max = di->dm_regs[BQ27XXX_DM_DESIGN_CAPACITY].max;
>>>> drivers/power/supply/bq27xxx_battery.c: min = di->dm_regs[BQ27XXX_DM_TERMINATE_VOLTAGE].min;
>>>> drivers/power/supply/bq27xxx_battery.c: max = di->dm_regs[BQ27XXX_DM_TERMINATE_VOLTAGE].max;
>>>> Binary file drivers/power/supply/bq27xxx_battery.ko matches
>>>> Binary file drivers/power/supply/bq27xxx_battery.o matches
>>>> Binary file drivers/power/supply/bq27xxx_battery_i2c.ko matches
>>>> Binary file drivers/power/supply/bq27xxx_battery_i2c.o matches
>>>> include/linux/power/bq27xxx_battery.h:  struct bq27xxx_dm_reg *dm_regs;
>>>> master hns$
>>>> 
>>>> What am I doing wrong here?
>>>> 
>>>> BR and thanks,
>>>> Nikolaus
>>>> 
>>