[PATCH v3 08/11] power: supply: bq24190_charger: Export 5V boost converter as regulator
From: Hans de Goede
Date: Wed Aug 30 2017 - 05:48:54 EST
Register the 5V boost converter as a regulator named "usb_otg_vbus".
This commit also adds support for bq24190_platform_data, through which
non device-tree platforms can pass the regulator_init_data (containing
mappings for the consumer amongst other things).
Signed-off-by: Hans de Goede <hdegoede@xxxxxxxxxx>
---
Changes in v2:
-Use "usb_otg_vbus" as default name for the regulator
-Add support for passing regulator_init_data for non device-tree platforms
-Register the regulator later, to avoid it showing up and shortly later
disappearing again on probe errors (e.g. -EPROBE_DEFER).
Changes in v3:
-Add a bq24190_set_charge_mode helper and use that for the vbus_enable
and vbus_disable callbacks to reduce code duplication
---
drivers/power/supply/bq24190_charger.c | 112 +++++++++++++++++++++++++++++++++
include/linux/power/bq24190_charger.h | 18 ++++++
2 files changed, 130 insertions(+)
create mode 100644 include/linux/power/bq24190_charger.h
diff --git a/drivers/power/supply/bq24190_charger.c b/drivers/power/supply/bq24190_charger.c
index fa711c106b63..e606a078b0dd 100644
--- a/drivers/power/supply/bq24190_charger.c
+++ b/drivers/power/supply/bq24190_charger.c
@@ -16,6 +16,9 @@
#include <linux/of_device.h>
#include <linux/pm_runtime.h>
#include <linux/power_supply.h>
+#include <linux/power/bq24190_charger.h>
+#include <linux/regulator/driver.h>
+#include <linux/regulator/machine.h>
#include <linux/workqueue.h>
#include <linux/gpio.h>
#include <linux/i2c.h>
@@ -513,6 +516,111 @@ static int bq24190_sysfs_create_group(struct bq24190_dev_info *bdi)
static inline void bq24190_sysfs_remove_group(struct bq24190_dev_info *bdi) {}
#endif
+#ifdef CONFIG_REGULATOR
+static int bq24190_set_charge_mode(struct regulator_dev *dev, u8 val)
+{
+ struct bq24190_dev_info *bdi = rdev_get_drvdata(dev);
+ int ret;
+
+ ret = pm_runtime_get_sync(bdi->dev);
+ if (ret < 0) {
+ dev_warn(bdi->dev, "pm_runtime_get failed: %i\n", ret);
+ pm_runtime_put_noidle(bdi->dev);
+ return ret;
+ }
+
+ ret = bq24190_write_mask(bdi, BQ24190_REG_POC,
+ BQ24190_REG_POC_CHG_CONFIG_MASK,
+ BQ24190_REG_POC_CHG_CONFIG_SHIFT, val);
+
+ pm_runtime_mark_last_busy(bdi->dev);
+ pm_runtime_put_autosuspend(bdi->dev);
+
+ return ret;
+}
+
+static int bq24190_vbus_enable(struct regulator_dev *dev)
+{
+ return bq24190_set_charge_mode(dev, BQ24190_REG_POC_CHG_CONFIG_OTG);
+}
+
+static int bq24190_vbus_disable(struct regulator_dev *dev)
+{
+ return bq24190_set_charge_mode(dev, BQ24190_REG_POC_CHG_CONFIG_CHARGE);
+}
+
+static int bq24190_vbus_is_enabled(struct regulator_dev *dev)
+{
+ struct bq24190_dev_info *bdi = rdev_get_drvdata(dev);
+ int ret;
+ u8 val;
+
+ ret = pm_runtime_get_sync(bdi->dev);
+ if (ret < 0) {
+ dev_warn(bdi->dev, "pm_runtime_get failed: %i\n", ret);
+ pm_runtime_put_noidle(bdi->dev);
+ return ret;
+ }
+
+ ret = bq24190_read_mask(bdi, BQ24190_REG_POC,
+ BQ24190_REG_POC_CHG_CONFIG_MASK,
+ BQ24190_REG_POC_CHG_CONFIG_SHIFT, &val);
+
+ pm_runtime_mark_last_busy(bdi->dev);
+ pm_runtime_put_autosuspend(bdi->dev);
+
+ return ret ? ret : val == BQ24190_REG_POC_CHG_CONFIG_OTG;
+}
+
+static const struct regulator_ops bq24190_vbus_ops = {
+ .enable = bq24190_vbus_enable,
+ .disable = bq24190_vbus_disable,
+ .is_enabled = bq24190_vbus_is_enabled,
+};
+
+static const struct regulator_desc bq24190_vbus_desc = {
+ .name = "usb_otg_vbus",
+ .type = REGULATOR_VOLTAGE,
+ .owner = THIS_MODULE,
+ .ops = &bq24190_vbus_ops,
+ .fixed_uV = 5000000,
+ .n_voltages = 1,
+};
+
+static const struct regulator_init_data bq24190_vbus_init_data = {
+ .constraints = {
+ .valid_ops_mask = REGULATOR_CHANGE_STATUS,
+ },
+};
+
+static int bq24190_register_vbus_regulator(struct bq24190_dev_info *bdi)
+{
+ struct bq24190_platform_data *pdata = bdi->dev->platform_data;
+ struct regulator_config cfg = { };
+ struct regulator_dev *reg;
+ int ret = 0;
+
+ cfg.dev = bdi->dev;
+ if (pdata && pdata->regulator_init_data)
+ cfg.init_data = pdata->regulator_init_data;
+ else
+ cfg.init_data = &bq24190_vbus_init_data;
+ cfg.driver_data = bdi;
+ reg = devm_regulator_register(bdi->dev, &bq24190_vbus_desc, &cfg);
+ if (IS_ERR(reg)) {
+ ret = PTR_ERR(reg);
+ dev_err(bdi->dev, "Can't register regulator: %d\n", ret);
+ }
+
+ return ret;
+}
+#else
+static int bq24190_register_vbus_regulator(struct bq24190_dev_info *bdi)
+{
+ return 0;
+}
+#endif
+
static int bq24190_set_config(struct bq24190_dev_info *bdi)
{
int ret;
@@ -1740,6 +1848,10 @@ static int bq24190_probe(struct i2c_client *client,
goto out_sysfs;
}
+ ret = bq24190_register_vbus_regulator(bdi);
+ if (ret < 0)
+ goto out_sysfs;
+
if (bdi->extcon) {
INIT_DELAYED_WORK(&bdi->extcon_work, bq24190_extcon_work);
bdi->extcon_nb.notifier_call = bq24190_extcon_event;
diff --git a/include/linux/power/bq24190_charger.h b/include/linux/power/bq24190_charger.h
new file mode 100644
index 000000000000..45ce7f116a91
--- /dev/null
+++ b/include/linux/power/bq24190_charger.h
@@ -0,0 +1,18 @@
+/*
+ * Platform data for the TI bq24190 battery charger driver.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+
+#ifndef _BQ24190_CHARGER_H_
+#define _BQ24190_CHARGER_H_
+
+#include <linux/regulator/machine.h>
+
+struct bq24190_platform_data {
+ const struct regulator_init_data *regulator_init_data;
+};
+
+#endif
--
2.13.4