Re: [PATCH 7/7] ARM: dts: sun8i: h3: Enable AP6212 BT on uart3 on Nanopi M1 Plus

[Maxime Ripard]

On Wed, Aug 30, 2017 at 05:01:10AM +0200, Philipp Rossak wrote:
> From: Philipp Rossak <embed3d@xxxxxxxxx>
> 
> The BT side of the AP6212 WiFi/BT combo module is connected to
> uart3.
> 
> Enable BT on this board by enabling uart3 with using additionally
> the cts and rts pins.
> 
> Signed-off-by: Philipp Rossak <embed3d@xxxxxxxxx>

I've queued this patch for 4.15, but...

> ---
>  arch/arm/boot/dts/sun8i-h3-nanopi-m1-plus.dts | 7 +++++++
>  1 file changed, 7 insertions(+)
> 
> diff --git a/arch/arm/boot/dts/sun8i-h3-nanopi-m1-plus.dts b/arch/arm/boot/dts/sun8i-h3-nanopi-m1-plus.dts
> index 3054308..8c12419 100644
> --- a/arch/arm/boot/dts/sun8i-h3-nanopi-m1-plus.dts
> +++ b/arch/arm/boot/dts/sun8i-h3-nanopi-m1-plus.dts
> @@ -49,6 +49,7 @@
>  	aliases {
>  		ethernet0 = &emac;
>  		ethernet1 = &ap6212;
> +		serial1 = &uart3;

You'll also need an alias for serial 0 here. Can you send a follow up
patch to do so?

Thanks!
Maxime

-- 
Maxime Ripard, Free Electrons
Embedded Linux and Kernel engineering
http://free-electrons.com

Attachment: signature.asc
Description: PGP signature