Re: [PATCH 03/11] mux: consumer.h: Add MUX_USB_* state constant defines

[Andy Shevchenko]

On Sat, Sep 2, 2017 at 12:48 AM, Hans de Goede <hdegoede@xxxxxxxxxx> wrote:
> Add MUX_USB_* state constant defines, which can be used by USB
> device/host and Type-C polarity/role/altmode mux drivers and consumers
> to ensure that they agree on the meaning of the mux_control_select()
> state argument.

> +/*
> + * Mux state values for USB muxes, used for both USB device/host role muxes
> + * as well as for Type-C polarity/role/altmode muxes.
> + *
> + * MUX_USB_POLARITY_INV may be or-ed together with any other mux-state as
> + * inverted-polarity (Type-C plugged in upside down) can happen with any
> + * other mux-state.
> + */
> +#define MUX_USB_POLARITY_INV   BIT(0)   /* Polarity inverted bit */
> +#define MUX_USB_NONE           (1 << 1) /* Mux open / not connected */
> +#define MUX_USB_DEVICE         (2 << 1) /* USB device mode */
> +#define MUX_USB_HOST           (3 << 1) /* USB host mode */
> +#define MUX_USB_HOST_AND_DP_SRC        (4 << 1) /* USB host + 2 lanes Display Port */
> +#define MUX_USB_DP_SRC         (5 << 1) /* 4 lanes Display Port source */
> +#define MUX_USB_STATES         (6 << 1)

I would put OR'ed bits higher.

Like allocate 4 (8) bits for states and start special flagst from bit
8 and so on.


-- 
With Best Regards,
Andy Shevchenko