Re: [PATCH v4 0/2] add thermal nodes for UniPhier SoCs

[hayashi.kunihiko]

On Mon, 4 Sep 2017 11:09:51 +0900 <yamada.masahiro@xxxxxxxxxxxxx> wrote:

> Hi.
> 
> 
> 
> 2017-09-04 10:16 GMT+09:00 Kunihiko Hayashi <hayashi.kunihiko@xxxxxxxxxxxxx>:
> > This series adds thermal nodes for UniPhier PXs2 and LD20 SoCs.
> >
> > Changes since v3:
> > - rebase on top of linux-next
> 
> 
> This repost is a spam.
> 
> I left some comments in v3,
> but no response from you
> nothing was reflected in v4.

Sorry I missed them. I'll reflect your comments and repost them.

Thank you,

> 
> 
> 
> 
> > Changes since v2:
> > - add the calibration value to device tree for LD20 reference board
> >
> > Changes since v1:
> > - separate from driver's patchset[1]
> > - add cooling-maps nodes on the device tree
> > - fix an interrupt trigger to set 'level-triggered' according to
> >   hardware specification
> > - bring up threshold temperature for LD20 according to the spec sheet
> > - add cpuN labels for reference in cooling-device property on PXs2 dts
> >
> > [1] https://lkml.org/lkml/2017/6/28/170
> >
> > Kunihiko Hayashi (2):
> >   ARM: dts: uniphier: add nodes of thermal monitor and thermal zone for
> >     PXs2
> >   arm64: dts: uniphier: add nodes of thermal monitor and thermal zone
> >     for LD20
> >
> >  arch/arm/boot/dts/uniphier-pxs2.dtsi               | 43 ++++++++++++++++++++--
> >  .../arm64/boot/dts/socionext/uniphier-ld20-ref.dts |  4 ++
> >  arch/arm64/boot/dts/socionext/uniphier-ld20.dtsi   | 40 ++++++++++++++++++++
> >  3 files changed, 83 insertions(+), 4 deletions(-)
> >
> > --
> > 2.7.4
> >
> > --
> > To unsubscribe from this list: send the line "unsubscribe devicetree" in
> > the body of a message to majordomo@xxxxxxxxxxxxxxx
> > More majordomo info at  http://vger.kernel.org/majordomo-info.html
> 
> 
> 
> -- 
> Best Regards
> Masahiro Yamada

---
Kunihiko Hayashi
: hayashi.kunihiko@xxxxxxxxxxxxx