Re: [PATCH v3 2/2] arm64: dts: uniphier: add nodes of thermal monitor and thermal zone for LD20

[Kunihiko Hayashi]

Yamada-san,

On Thu, 10 Aug 2017 19:48:22 +0900 <yamada.masahiro@xxxxxxxxxxxxx> wrote:

> Hi Hayashi-san,
> 
> 
> 2017-07-05 20:53 GMT+09:00 Kunihiko Hayashi <hayashi.kunihiko@xxxxxxxxxxxxx>:
> > Add nodes of thermal monitor and thermal zone for UniPhier LD20 SoC.
> > The thermal monitor is included in sysctrl.
> >
> > Furthermore, since the reference board doesn't have a calibrated value of
> > thermal monitor, this patch gives the default value for LD20 reference
> > board.
> >
> > Signed-off-by: Kunihiko Hayashi <hayashi.kunihiko@xxxxxxxxxxxxx>
> > ---
> >  .../arm64/boot/dts/socionext/uniphier-ld20-ref.dts |  4 +++
> >  arch/arm64/boot/dts/socionext/uniphier-ld20.dtsi   | 40 ++++++++++++++++++++++
> >  2 files changed, 44 insertions(+)
> >
> > diff --git a/arch/arm64/boot/dts/socionext/uniphier-ld20-ref.dts b/arch/arm64/boot/dts/socionext/uniphier-ld20-ref.dts
> > index 609162a..d7f6b39 100644
> > --- a/arch/arm64/boot/dts/socionext/uniphier-ld20-ref.dts
> > +++ b/arch/arm64/boot/dts/socionext/uniphier-ld20-ref.dts
> > @@ -86,3 +86,7 @@
> >  &i2c0 {
> >         status = "okay";
> >  };
> > +
> > +&pvtctl {
> > +       socionext,tmod-calibration = <0x0f22 0x68ee>;
> > +};
> 
> 
> I think this calib value is shared among all boards
> (ref and global).
> 
> 
> Please move it to the SoC dtsi.

I see. I'll move it.

> > +                       cooling-maps {
> > +                               map0 {
> > +                                       trip = <&cpu_alert>;
> > +                                       cooling-device = <&cpu0 (-1) (-1)>;
> > +                               };
> > +                               map1 {
> > +                                       trip = <&cpu_alert>;
> > +                                       cooling-device = <&cpu2 (-1) (-1)>;
> > +                               };
> > +                       };
> > +               };
> > +       };
> > +
> 
> After all, I decided to use dt-bindings headers.
> Could you use THERMAL_NO_LIMIT for clarification?

Okay, I'll replace '(-1)' to THERMAL_NO_LIMIT and add the '#include' directive.

---
Best Regards,
Kunihiko Hayashi