Re: [PATCH 2/5] lmp92001: mfd: iio: adc: Add support LMP92001

[Jonathan Cameron]

On Sun, 3 Sep 2017 17:58:02 +0100
Jonathan Cameron <jic23@xxxxxxxxxxxxxxxxxxxxx> wrote:

> On Wed, 30 Aug 2017 20:21:58 +0100
> Jonathan Cameron <jic23@xxxxxxxxxxxxxxxxxxxxx> wrote:
> 
> > Hi, for a multipart driver like this, please send all parts to all cc'd people. 
> > We would like to know how it fits together.
> > 
> > Resending with that will save everyone time tracking down the other parts.  
> 
> Just to clarify - I'm not going to even look at this until you resend
> with all patches sent to all relevant lists and people.  It would just
> waste time. Others may also be waiting for this before taking a look
> (or just busy ;)

Strange, my laptop ate the FWDs you did.

I'd have preferred a resend of the whole series, but guess I can work
with that.

Jonathan

> 
> Jonathan
> 
> > 
> > Jonathan.
> > 
> > On 30 August 2017 19:14:09 BST, s.abhisit@xxxxxxxxx wrote:  
> > >From: Abhisit Sangjan <s.abhisit@xxxxxxxxx>
> > >
> > >TI LMP92001 Analog System Monitor and Controller
> > >
> > >8-bit GPIOs.
> > >12 DACs with 12-bit resolution.
> > >
> > >The GPIOs and DACs are shared port function with Cy function pin to
> > >take control the pin suddenly from external hardware.
> > >DAC's referance voltage selectable for Internal/External.
> > >
> > >16 + 1 ADCs with 12-bit resolution.
> > >
> > >Built-in internal Temperature Sensor on channel 17.
> > >Window Comparator Function is supported on channel 1-3 and 9-11 for
> > >monitoring with interrupt signal (pending to implement for interrupt).
> > >ADC's referance voltage selectable for Internal/External.
> > >
> > >Signed-off-by: Abhisit Sangjan <s.abhisit@xxxxxxxxx>
> > >---
> > > drivers/iio/adc/Kconfig        |  10 +
> > > drivers/iio/adc/Makefile       |   1 +
> > >drivers/iio/adc/lmp92001-adc.c | 476
> > >+++++++++++++++++++++++++++++++++++++++++
> > > 3 files changed, 487 insertions(+)
> > > create mode 100644 drivers/iio/adc/lmp92001-adc.c
> > >
> > >diff --git a/drivers/iio/adc/Kconfig b/drivers/iio/adc/Kconfig
> > >index 614fa41559b1..2adeba543ac7 100644
> > >--- a/drivers/iio/adc/Kconfig
> > >+++ b/drivers/iio/adc/Kconfig
> > >@@ -331,6 +331,16 @@ config IMX7D_ADC
> > >	  This driver can also be built as a module. If so, the module will be
> > > 	  called imx7d_adc.
> > > 
> > >+config LMP92001_ADC
> > >+       tristate "TI LMP92001 ADC Driver"
> > >+       depends on MFD_LMP92001
> > >+       help
> > >+         If you say yes here you get support for TI LMP92001 ADCs
> > >+         conversion.
> > >+
> > >+         This driver can also be built as a module. If so, the module
> > >will
> > >+         be called lmp92001_adc.
> > >+
> > > config LP8788_ADC
> > > 	tristate "LP8788 ADC driver"
> > > 	depends on MFD_LP8788
> > >diff --git a/drivers/iio/adc/Makefile b/drivers/iio/adc/Makefile
> > >index b546736a5541..2ed89862090b 100644
> > >--- a/drivers/iio/adc/Makefile
> > >+++ b/drivers/iio/adc/Makefile
> > >@@ -31,6 +31,7 @@ obj-$(CONFIG_HI8435) += hi8435.o
> > > obj-$(CONFIG_HX711) += hx711.o
> > > obj-$(CONFIG_IMX7D_ADC) += imx7d_adc.o
> > > obj-$(CONFIG_INA2XX_ADC) += ina2xx-adc.o
> > >+obj-$(CONFIG_LMP92001_ADC) += lmp92001-adc.o
> > > obj-$(CONFIG_LP8788_ADC) += lp8788_adc.o
> > > obj-$(CONFIG_LPC18XX_ADC) += lpc18xx_adc.o
> > > obj-$(CONFIG_LPC32XX_ADC) += lpc32xx_adc.o
> > >diff --git a/drivers/iio/adc/lmp92001-adc.c
> > >b/drivers/iio/adc/lmp92001-adc.c
> > >new file mode 100644
> > >index 000000000000..f706a364337d
> > >--- /dev/null
> > >+++ b/drivers/iio/adc/lmp92001-adc.c
> > >@@ -0,0 +1,476 @@
> > >+/*
> > >+ * lmp92001-adc.c - Support for TI LMP92001 ADCs
> > >+ *
> > >+ * Copyright 2016-2017 Celestica Ltd.
> > >+ *
> > >+ * Author: Abhisit Sangjan <s.abhisit@xxxxxxxxx>
> > >+ *
> > >+ * Inspired by wm831x and ad5064 drivers.
> > >+ *
> > >+ * This program is free software; you can redistribute it and/or
> > >modify
> > >+ * it under the terms of the GNU General Public License as published
> > >by
> > >+ * the Free Software Foundation; either version 2 of the License, or
> > >+ * (at your option) any later version.
> > >+ *
> > >+ * This program is distributed in the hope that it will be useful,
> > >+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
> > >+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
> > >+ * GNU General Public License for more details.
> > >+ */
> > >+
> > >+#include <linux/iio/iio.h>
> > >+#include <linux/interrupt.h>
> > >+#include <linux/kernel.h>
> > >+#include <linux/mfd/core.h>
> > >+#include <linux/module.h>
> > >+#include <linux/platform_device.h>
> > >+
> > >+#include <linux/mfd/lmp92001/core.h>
> > >+
> > >+static int lmp92001_read_raw(struct iio_dev *indio_dev,
> > >+	struct iio_chan_spec const *channel, int *val, int *val2, long mask)
> > >+{
> > >+	struct lmp92001 *lmp92001 = iio_device_get_drvdata(indio_dev);
> > >+	unsigned int code, cgen, sgen, try;
> > >+	int ret;
> > >+
> > >+	mutex_lock(&lmp92001->adc_lock);
> > >+
> > >+	ret = regmap_read(lmp92001->regmap, LMP92001_CGEN, &cgen);
> > >+	if (ret < 0)
> > >+		goto exit;
> > >+
> > >+	/*
> > >+	 * Is not continuous conversion?
> > >+	 * Lock the HW registers (if needed).
> > >+	 * Triggering single-short conversion.
> > >+	 * Waiting for conversion successful.
> > >+	 */
> > >+	if (!(cgen & CGEN_STRT)) {
> > >+		if (!(cgen & CGEN_LCK)) {
> > >+			ret = regmap_update_bits(lmp92001->regmap,
> > >+					LMP92001_CGEN, CGEN_LCK, CGEN_LCK);
> > >+			if (ret < 0)
> > >+				goto exit;
> > >+		}
> > >+
> > >+		/* Writing any value to trigger Single-Shot conversion. */
> > >+		ret = regmap_write(lmp92001->regmap, LMP92001_CTRIG, 1);
> > >+		if (ret < 0)
> > >+			goto exit;
> > >+
> > >+		/* In case of conversion is in-progress, repeat for 10 times. */
> > >+		try = 10;
> > >+		do {
> > >+			ret = regmap_read(lmp92001->regmap,
> > >+						LMP92001_SGEN, &sgen);
> > >+			if (ret < 0)
> > >+				goto exit;
> > >+		} while ((sgen & CGEN_RST) && (--try > 0));
> > >+
> > >+		if (!try) {
> > >+			ret = -ETIME;
> > >+			goto exit;
> > >+		}
> > >+	}
> > >+
> > >+	ret = regmap_read(lmp92001->regmap, 0x1F + channel->channel, &code);
> > >+	if (ret < 0)
> > >+		goto exit;
> > >+
> > >+	switch (mask) {
> > >+	case IIO_CHAN_INFO_RAW:
> > >+		switch (channel->type) {
> > >+		case IIO_VOLTAGE:
> > >+		case IIO_TEMP:
> > >+			*val = code;
> > >+			ret = IIO_VAL_INT;
> > >+			goto exit;
> > >+		default:
> > >+			break;
> > >+		}
> > >+		break;
> > >+	default:
> > >+		break;
> > >+	}
> > >+
> > >+	/* In case of no match channel info/type is return here. */
> > >+	ret = -EINVAL;
> > >+
> > >+exit:
> > >+	mutex_unlock(&lmp92001->adc_lock);
> > >+
> > >+	return ret;
> > >+}
> > >+
> > >+static const struct iio_info lmp92001_info = {
> > >+	.read_raw = lmp92001_read_raw,
> > >+	.driver_module = THIS_MODULE,
> > >+};
> > >+
> > >+static ssize_t lmp92001_avref_read(struct iio_dev *indio_dev,
> > >+	uintptr_t private, struct iio_chan_spec const *channel, char *buf)
> > >+{
> > >+	struct lmp92001 *lmp92001 = iio_device_get_drvdata(indio_dev);
> > >+	unsigned int cref;
> > >+	int ret;
> > >+
> > >+	ret = regmap_read(lmp92001->regmap, LMP92001_CREF, &cref);
> > >+	if (ret < 0)
> > >+		return ret;
> > >+
> > >+	return sprintf(buf, "%s\n", (cref & CREF_AEXT) ? "external" :
> > >"internal");
> > >+}
> > >+
> > >+static ssize_t lmp92001_avref_write(struct iio_dev *indio_dev,
> > >+	uintptr_t private, struct iio_chan_spec const *channel,
> > >+	const char *buf, size_t len)
> > >+{
> > >+	struct lmp92001 *lmp92001 = iio_device_get_drvdata(indio_dev);
> > >+	unsigned int cref;
> > >+	int ret;
> > >+
> > >+	if (strncmp("external", buf, 8) == 0)
> > >+		cref = 2;
> > >+	else if (strncmp("internal", buf, 8) == 0)
> > >+		cref = 0;
> > >+	else
> > >+		return -EINVAL;
> > >+
> > >+	ret = regmap_update_bits(lmp92001->regmap, LMP92001_CREF, CREF_AEXT,
> > >+					cref);
> > >+	if (ret < 0)
> > >+		return ret;
> > >+
> > >+	return len;
> > >+}
> > >+
> > >+static ssize_t lmp92001_enable_read(struct iio_dev *indio_dev,
> > >+	uintptr_t private, struct iio_chan_spec const *channel, char *buf)
> > >+{
> > >+	struct lmp92001 *lmp92001 = iio_device_get_drvdata(indio_dev);
> > >+	unsigned int reg, cad;
> > >+	int ret;
> > >+
> > >+	switch (channel->channel) {
> > >+	case 1 ... 8:
> > >+		reg = LMP92001_CAD1;
> > >+		break;
> > >+	case 9 ... 16:
> > >+		reg = LMP92001_CAD2;
> > >+		break;
> > >+	case 17:
> > >+		reg = LMP92001_CAD3;
> > >+		break;
> > >+	default:
> > >+		return -EINVAL;
> > >+	}
> > >+
> > >+	ret = regmap_read(lmp92001->regmap, reg, &cad);
> > >+	if (ret < 0)
> > >+		return ret;
> > >+
> > >+	if (channel->channel <= 8)
> > >+		cad >>= channel->channel - 1;
> > >+	else if (channel->channel > 8)
> > >+		cad >>= channel->channel - 9;
> > >+	else if (channel->channel > 16)
> > >+		cad >>= channel->channel - 17;
> > >+	else
> > >+		return -EINVAL;
> > >+
> > >+	return sprintf(buf, "%s\n", cad & BIT(0) ? "enable" : "disable");
> > >+}
> > >+
> > >+static ssize_t lmp92001_enable_write(struct iio_dev *indio_dev,
> > >+	uintptr_t private, struct iio_chan_spec const *channel,
> > >+	const char *buf, size_t len)
> > >+{
> > >+	struct lmp92001 *lmp92001 = iio_device_get_drvdata(indio_dev);
> > >+	unsigned int reg, enable, shif, mask;
> > >+	int ret;
> > >+
> > >+	switch (channel->channel) {
> > >+	case 1 ... 8:
> > >+		reg = LMP92001_CAD1;
> > >+		shif = (channel->channel - 1);
> > >+		break;
> > >+	case 9 ... 16:
> > >+		reg = LMP92001_CAD2;
> > >+		shif = (channel->channel - 9);
> > >+		break;
> > >+	case 17:
> > >+		reg = LMP92001_CAD3;
> > >+		shif = (channel->channel - 17);
> > >+		break;
> > >+	default:
> > >+		return -EINVAL;
> > >+	}
> > >+
> > >+	if (strncmp("enable", buf, 6) == 0)
> > >+		enable = 1;
> > >+	else if (strncmp("disable", buf, 7) == 0)
> > >+		enable = 0;
> > >+	else
> > >+		return -EINVAL;
> > >+
> > >+	enable <<= shif;
> > >+	mask = 1 << shif;
> > >+
> > >+	ret = regmap_update_bits(lmp92001->regmap, reg, mask, enable);
> > >+	if (ret < 0)
> > >+		return ret;
> > >+
> > >+	return len;
> > >+}
> > >+
> > >+static ssize_t lmp92001_mode_read(struct iio_dev *indio_dev,
> > >+	uintptr_t private, struct iio_chan_spec const *channel, char *buf)
> > >+{
> > >+	struct lmp92001 *lmp92001 = iio_device_get_drvdata(indio_dev);
> > >+	unsigned int cgen;
> > >+	int ret;
> > >+
> > >+	ret = regmap_read(lmp92001->regmap, LMP92001_CGEN, &cgen);
> > >+	if (ret < 0)
> > >+		return ret;
> > >+
> > >+	return sprintf(buf, "%s\n",
> > >+			cgen & BIT(0) ? "continuous" : "single-shot");
> > >+}
> > >+
> > >+static ssize_t lmp92001_mode_write(struct iio_dev *indio_dev,
> > >+	uintptr_t private, struct iio_chan_spec const *channel,
> > >+	const char *buf, size_t len)
> > >+{
> > >+	struct lmp92001 *lmp92001 = iio_device_get_drvdata(indio_dev);
> > >+	unsigned int cgen;
> > >+	int ret;
> > >+
> > >+	if (strncmp("continuous", buf, 10) == 0)
> > >+		cgen = 1;
> > >+	else if (strncmp("single-shot", buf, 11) == 0)
> > >+		cgen = 0;
> > >+	else
> > >+		return -EINVAL;
> > >+
> > >+	mutex_lock(&lmp92001->adc_lock);
> > >+
> > >+	/*
> > >+	 * Unlock the HW registers.
> > >+	 * Set conversion mode.
> > >+	 * Lock the HW registers.
> > >+	 */
> > >+	ret = regmap_update_bits(lmp92001->regmap, LMP92001_CGEN, CGEN_LCK,
> > >0);
> > >+	if (ret < 0)
> > >+		goto exit;
> > >+
> > >+	ret = regmap_update_bits(lmp92001->regmap, LMP92001_CGEN, CGEN_STRT,
> > >+					cgen);
> > >+	if (ret < 0)
> > >+		goto exit;
> > >+
> > >+	ret = regmap_update_bits(lmp92001->regmap, LMP92001_CGEN, CGEN_LCK,
> > >+					CGEN_LCK);
> > >+	if (ret < 0)
> > >+		goto exit;
> > >+
> > >+	return len;
> > >+
> > >+exit:
> > >+	mutex_unlock(&lmp92001->adc_lock);
> > >+
> > >+	return ret;
> > >+}
> > >+
> > >+static const struct iio_chan_spec_ext_info lmp92001_ext_info[] = {
> > >+	{
> > >+		.name = "vref",
> > >+		.read = lmp92001_avref_read,
> > >+		.write = lmp92001_avref_write,
> > >+		.shared = IIO_SHARED_BY_ALL,
> > >+	}, {
> > >+		.name = "en",
> > >+		.read = lmp92001_enable_read,
> > >+		.write = lmp92001_enable_write,
> > >+		.shared = IIO_SEPARATE,
> > >+	}, {
> > >+		.name = "mode",
> > >+		.read = lmp92001_mode_read,
> > >+		.write = lmp92001_mode_write,
> > >+		.shared = IIO_SHARED_BY_ALL,
> > >+	}, { },
> > >+};
> > >+
> > >+static const struct iio_event_spec lmp92001_events[] = {
> > >+	{
> > >+		.type = IIO_EV_TYPE_THRESH,
> > >+		.dir = IIO_EV_DIR_RISING,
> > >+		.mask_separate = BIT(IIO_EV_INFO_ENABLE) |
> > >+			BIT(IIO_EV_INFO_VALUE),
> > >+	}, {
> > >+		.type = IIO_EV_TYPE_THRESH,
> > >+		.dir = IIO_EV_DIR_FALLING,
> > >+		.mask_separate = BIT(IIO_EV_INFO_ENABLE) |
> > >+			BIT(IIO_EV_INFO_VALUE),
> > >+	}, { },
> > >+};
> > >+
> > >+#define LMP92001_CHAN_SPEC(_ch, _type, _event, _nevent) \
> > >+{ \
> > >+	.channel = _ch, \
> > >+	.type = _type, \
> > >+	.indexed = 1, \
> > >+	.info_mask_separate = BIT(IIO_CHAN_INFO_RAW) | \
> > >+		BIT(IIO_CHAN_INFO_SCALE), \
> > >+	.event_spec = _event, \
> > >+	.num_event_specs = _nevent, \
> > >+	.ext_info = lmp92001_ext_info, \
> > >+}
> > >+
> > >+static const struct iio_chan_spec lmp92001_adc_channels[] = {
> > >+	LMP92001_CHAN_SPEC(1, IIO_VOLTAGE, lmp92001_events,
> > >+			ARRAY_SIZE(lmp92001_events)),
> > >+	LMP92001_CHAN_SPEC(2, IIO_VOLTAGE, lmp92001_events,
> > >+			ARRAY_SIZE(lmp92001_events)),
> > >+	LMP92001_CHAN_SPEC(3, IIO_VOLTAGE, lmp92001_events,
> > >+			ARRAY_SIZE(lmp92001_events)),
> > >+	LMP92001_CHAN_SPEC(4, IIO_VOLTAGE, NULL, 0),
> > >+	LMP92001_CHAN_SPEC(5, IIO_VOLTAGE, NULL, 0),
> > >+	LMP92001_CHAN_SPEC(6, IIO_VOLTAGE, NULL, 0),
> > >+	LMP92001_CHAN_SPEC(7, IIO_VOLTAGE, NULL, 0),
> > >+	LMP92001_CHAN_SPEC(8, IIO_VOLTAGE, NULL, 0),
> > >+	LMP92001_CHAN_SPEC(9, IIO_VOLTAGE, lmp92001_events,
> > >+			ARRAY_SIZE(lmp92001_events)),
> > >+	LMP92001_CHAN_SPEC(10, IIO_VOLTAGE, lmp92001_events,
> > >+			ARRAY_SIZE(lmp92001_events)),
> > >+	LMP92001_CHAN_SPEC(11, IIO_VOLTAGE, lmp92001_events,
> > >+			ARRAY_SIZE(lmp92001_events)),
> > >+	LMP92001_CHAN_SPEC(12, IIO_VOLTAGE, NULL, 0),
> > >+	LMP92001_CHAN_SPEC(13, IIO_VOLTAGE, NULL, 0),
> > >+	LMP92001_CHAN_SPEC(14, IIO_VOLTAGE, NULL, 0),
> > >+	LMP92001_CHAN_SPEC(15, IIO_VOLTAGE, NULL, 0),
> > >+	LMP92001_CHAN_SPEC(16, IIO_VOLTAGE, NULL, 0),
> > >+	LMP92001_CHAN_SPEC(17,    IIO_TEMP, NULL, 0),
> > >+};
> > >+
> > >+static int lmp92001_adc_probe(struct platform_device *pdev)
> > >+{
> > >+	struct lmp92001 *lmp92001 = dev_get_drvdata(pdev->dev.parent);
> > >+	struct iio_dev *indio_dev;
> > >+	struct device_node *np = pdev->dev.of_node;
> > >+	unsigned int cgen = 0, cad1, cad2, cad3;
> > >+	u32 mask;
> > >+	int ret;
> > >+
> > >+	indio_dev = devm_iio_device_alloc(&pdev->dev, 0);
> > >+	if (!indio_dev)
> > >+		return -ENOMEM;
> > >+
> > >+	iio_device_set_drvdata(indio_dev, lmp92001);
> > >+
> > >+	mutex_init(&lmp92001->adc_lock);
> > >+
> > >+	indio_dev->name = pdev->name;
> > >+	indio_dev->dev.parent = &pdev->dev;
> > >+	indio_dev->modes = INDIO_DIRECT_MODE;
> > >+	indio_dev->info = &lmp92001_info;
> > >+	indio_dev->channels = lmp92001_adc_channels;
> > >+	indio_dev->num_channels = ARRAY_SIZE(lmp92001_adc_channels);
> > >+
> > >+	ret = regmap_update_bits(lmp92001->regmap, LMP92001_CGEN,
> > >+					CGEN_RST, CGEN_RST);
> > >+	if (ret < 0) {
> > >+		dev_err(&pdev->dev, "failed to self reset all registers\n");
> > >+		return ret;
> > >+	}
> > >+
> > >+	/*
> > >+	 * Turn on all of them, if you are pretty sure they are must be
> > >+	 * real-time update or specify which channel is needed to be used to
> > >+	 * save conversion time for a cycle.
> > >+	 */
> > >+	ret = of_property_read_u32(np, "ti,lmp92001-adc-mask", &mask);
> > >+	if (ret < 0) {
> > >+		cad1 = cad2 = cad3 = 0xFF;
> > >+		dev_info(&pdev->dev, "turn on all of channels by default\n");
> > >+	} else {
> > >+		cad1 = mask & 0xFF;
> > >+		cad2 = (mask >> 8) & 0xFF;
> > >+		cad3 = (mask >> 16) & 0xFF;
> > >+	}
> > >+
> > >+	ret = regmap_update_bits(lmp92001->regmap, LMP92001_CAD1, 0xFF,
> > >cad1);
> > >+	if (ret < 0) {
> > >+		dev_err(&pdev->dev, "failed to enable/disable channels 1-8\n");
> > >+		return ret;
> > >+	}
> > >+
> > >+	ret = regmap_update_bits(lmp92001->regmap, LMP92001_CAD2, 0xFF,
> > >cad2);
> > >+	if (ret < 0) {
> > >+		dev_err(&pdev->dev, "failed to enable/disable channels 9-16\n");
> > >+		return ret;
> > >+	}
> > >+
> > >+	ret = regmap_update_bits(lmp92001->regmap, LMP92001_CAD3, BIT(0),
> > >cad3);
> > >+	if (ret < 0) {
> > >+		dev_err(&pdev->dev,
> > >+			"failed to enable/disable channel 17 (temperature)\n");
> > >+		return ret;
> > >+	}
> > >+
> > >+	cgen |= 1; /* Continuous conversion is default. */
> > >+
> > >+	/* Lock the HW registers and set conversion mode. */
> > >+	ret = regmap_update_bits(lmp92001->regmap,
> > >+					LMP92001_CGEN, CGEN_LCK | CGEN_STRT,
> > >+					cgen | CGEN_LCK);
> > >+	if (ret < 0)
> > >+		return ret;
> > >+
> > >+	platform_set_drvdata(pdev, indio_dev);
> > >+
> > >+	return devm_iio_device_register(&pdev->dev, indio_dev);
> > >+}
> > >+
> > >+static int lmp92001_adc_remove(struct platform_device *pdev)
> > >+{
> > >+	struct iio_dev *indio_dev = platform_get_drvdata(pdev);
> > >+	struct lmp92001 *lmp92001 = iio_device_get_drvdata(indio_dev);
> > >+
> > >+	/*
> > >+	 * To stop ADC conversion to save power
> > >+	 *
> > >+	 * Unlock the HW registers.
> > >+	 * Set conversion mode to single-shot.
> > >+	 * Lock the HW registers.
> > >+	 */
> > >+	regmap_update_bits(lmp92001->regmap, LMP92001_CGEN, CGEN_LCK, 0);
> > >+	regmap_update_bits(lmp92001->regmap, LMP92001_CGEN, CGEN_STRT, 0);
> > >+	regmap_update_bits(lmp92001->regmap, LMP92001_CGEN, CGEN_LCK,
> > >CGEN_LCK);
> > >+
> > >+	return 0;
> > >+}
> > >+
> > >+static struct platform_driver lmp92001_adc_driver = {
> > >+	.driver.name	= "lmp92001-adc",
> > >+	.probe		= lmp92001_adc_probe,
> > >+	.remove		= lmp92001_adc_remove,
> > >+};
> > >+
> > >+static int __init lmp92001_adc_init(void)
> > >+{
> > >+	return platform_driver_register(&lmp92001_adc_driver);
> > >+}
> > >+subsys_initcall(lmp92001_adc_init);
> > >+
> > >+static void __exit lmp92001_adc_exit(void)
> > >+{
> > >+	platform_driver_unregister(&lmp92001_adc_driver);
> > >+}
> > >+module_exit(lmp92001_adc_exit);
> > >+
> > >+MODULE_AUTHOR("Abhisit Sangjan <s.abhisit@xxxxxxxxx>");
> > >+MODULE_DESCRIPTION("IIO ADC interface for TI LMP92001");
> > >+MODULE_LICENSE("GPL");
> > >+MODULE_ALIAS("platform:lmp92001-adc");    
> >   
> 
> --
> To unsubscribe from this list: send the line "unsubscribe linux-iio" in
> the body of a message to majordomo@xxxxxxxxxxxxxxx
> More majordomo info at  http://vger.kernel.org/majordomo-info.html