[PATCH 1/2] bus: arm-ccn: Fix use of smp_processor_id() in preemptible context

[Marc Zyngier]

Booting a DEBUG_PREEMPT enabled kernel on a CCN-based system
results in the following splat:

[...]
arm-ccn e8000000.ccn: No access to interrupts, using timer.
BUG: using smp_processor_id() in preemptible [00000000] code: swapper/0/1
caller is debug_smp_processor_id+0x1c/0x28
CPU: 1 PID: 1 Comm: swapper/0 Not tainted 4.13.0 #6111
Hardware name: AMD Seattle/Seattle, BIOS 17:08:23 Jun 26 2017
Call trace:
[<ffff000008089e78>] dump_backtrace+0x0/0x278
[<ffff00000808a22c>] show_stack+0x24/0x30
[<ffff000008bc3bc4>] dump_stack+0x8c/0xb0
[<ffff00000852b534>] check_preemption_disabled+0xfc/0x100
[<ffff00000852b554>] debug_smp_processor_id+0x1c/0x28
[<ffff000008551bd8>] arm_ccn_probe+0x358/0x4f0
[...]

as we use smp_processor_id() in the wrong context. Turning this
into a get_cpu()/put_cpu() does the trick.

Signed-off-by: Marc Zyngier <marc.zyngier@xxxxxxx>
---
 drivers/bus/arm-ccn.c | 3 ++-
 1 file changed, 2 insertions(+), 1 deletion(-)

diff --git a/drivers/bus/arm-ccn.c b/drivers/bus/arm-ccn.c
index e8c6946fed9d..8502f1767024 100644
--- a/drivers/bus/arm-ccn.c
+++ b/drivers/bus/arm-ccn.c
@@ -1297,7 +1297,8 @@ static int arm_ccn_pmu_init(struct arm_ccn *ccn)
 	}
 
 	/* Pick one CPU which we will use to collect data from CCN... */
-	cpumask_set_cpu(smp_processor_id(), &ccn->dt.cpu);
+	cpumask_set_cpu(get_cpu(), &ccn->dt.cpu);
+	put_cpu();
 
 	/* Also make sure that the overflow interrupt is handled by this CPU */
 	if (ccn->irq) {
-- 
2.11.0