[PATCH 3/7] rtc: ds1307: use u32

From: Alexandre Belloni
Date: Mon Sep 04 2017 - 16:47:06 EST


u32 should be used instead of uint32_t

Signed-off-by: Alexandre Belloni <alexandre.belloni@xxxxxxxxxxxxxxxxxx>
---
drivers/rtc/rtc-ds1307.c | 8 ++++----
1 file changed, 4 insertions(+), 4 deletions(-)

diff --git a/drivers/rtc/rtc-ds1307.c b/drivers/rtc/rtc-ds1307.c
index 93fb08452159..328183e0e121 100644
--- a/drivers/rtc/rtc-ds1307.c
+++ b/drivers/rtc/rtc-ds1307.c
@@ -142,13 +142,13 @@ struct chip_desc {
irq_handler_t irq_handler;
const struct rtc_class_ops *rtc_ops;
u16 trickle_charger_reg;
- u8 (*do_trickle_setup)(struct ds1307 *, uint32_t,
+ u8 (*do_trickle_setup)(struct ds1307 *, u32,
bool);
};

static int ds1307_get_time(struct device *dev, struct rtc_time *t);
static int ds1307_set_time(struct device *dev, struct rtc_time *t);
-static u8 do_trickle_setup_ds1339(struct ds1307 *, uint32_t ohms, bool diode);
+static u8 do_trickle_setup_ds1339(struct ds1307 *, u32 ohms, bool diode);
static irqreturn_t rx8130_irq(int irq, void *dev_id);
static int rx8130_read_alarm(struct device *dev, struct rtc_wkalrm *t);
static int rx8130_set_alarm(struct device *dev, struct rtc_wkalrm *t);
@@ -963,7 +963,7 @@ static int ds1307_nvram_write(void *priv, unsigned int offset, void *val,
/*----------------------------------------------------------------------*/

static u8 do_trickle_setup_ds1339(struct ds1307 *ds1307,
- uint32_t ohms, bool diode)
+ u32 ohms, bool diode)
{
u8 setup = (diode) ? DS1307_TRICKLE_CHARGER_DIODE :
DS1307_TRICKLE_CHARGER_NO_DIODE;
@@ -989,7 +989,7 @@ static u8 do_trickle_setup_ds1339(struct ds1307 *ds1307,
static u8 ds1307_trickle_init(struct ds1307 *ds1307,
const struct chip_desc *chip)
{
- uint32_t ohms;
+ u32 ohms;
bool diode = true;

if (!chip->do_trickle_setup)
--
2.14.1