[PATCH v2 4/6] dt-bindings: host1x: Add Tegra186 information

From: Mikko Perttunen
Date: Tue Sep 05 2017 - 04:43:56 EST


Add the Tegra186-specific hypervisor-related register range
properties.

Signed-off-by: Mikko Perttunen <mperttunen@xxxxxxxxxx>
---
v2:
- Dropped incorrect note about cells properties.

.../devicetree/bindings/display/tegra/nvidia,tegra20-host1x.txt | 4 ++++
1 file changed, 4 insertions(+)

diff --git a/Documentation/devicetree/bindings/display/tegra/nvidia,tegra20-host1x.txt b/Documentation/devicetree/bindings/display/tegra/nvidia,tegra20-host1x.txt
index 74e1e8add5a1..844e0103fb0d 100644
--- a/Documentation/devicetree/bindings/display/tegra/nvidia,tegra20-host1x.txt
+++ b/Documentation/devicetree/bindings/display/tegra/nvidia,tegra20-host1x.txt
@@ -3,6 +3,10 @@ NVIDIA Tegra host1x
Required properties:
- compatible: "nvidia,tegra<chip>-host1x"
- reg: Physical base address and length of the controller's registers.
+ For pre-Tegra186, one entry describing the whole register area.
+ For Tegra186, one entry for each entry in reg-names:
+ "vm" - VM region assigned to Linux
+ "hypervisor" - Hypervisor region (only if Linux acts as hypervisor)
- interrupts: The interrupt outputs from the controller.
- #address-cells: The number of cells used to represent physical base addresses
in the host1x address space. Should be 1.
--
2.14.1