Re: [PATCH v6] vfio: platform: reset: Add Broadcom FlexRM reset module

From: Anup Patel
Date: Wed Sep 06 2017 - 04:15:06 EST


On Tue, Sep 5, 2017 at 9:27 PM, Alex Williamson
<alex.williamson@xxxxxxxxxx> wrote:
> On Mon, 4 Sep 2017 15:20:11 +0530
> Anup Patel <anup.patel@xxxxxxxxxxxx> wrote:
>
>> Sorry for delayed response...
>>
>> On Tue, Aug 29, 2017 at 7:39 PM, Konrad Rzeszutek Wilk
>> <konrad.wilk@xxxxxxxxxx> wrote:
>> > On Tue, Aug 29, 2017 at 09:34:46AM +0530, Anup Patel wrote:
>> >> This patch adds Broadcom FlexRM low-level reset for
>> >> VFIO platform.
>> >>
>> >
>> > Is there an document that explains and /or details the various
>> > registers?
>>
>> Yes, there is a document but its not publicly accessible.
>>
>> >> It will do the following:
>> >> 1. Disable/Deactivate each FlexRM ring
>> >> 2. Flush each FlexRM ring
>> >>
>> >> The cleanup sequence for FlexRM rings is adapted from
>> >> Broadcom FlexRM mailbox driver.
>> >>
>> >> Signed-off-by: Anup Patel <anup.patel@xxxxxxxxxxxx>
>> >> Reviewed-by: Oza Oza <oza.oza@xxxxxxxxxxxx>
>> >> Reviewed-by: Scott Branden <scott.branden@xxxxxxxxxxxx>
>> >> Reviewed-by: Eric Auger <eric.auger@xxxxxxxxxx>
>> >> ---
>> >> drivers/vfio/platform/reset/Kconfig | 9 ++
>> >> drivers/vfio/platform/reset/Makefile | 1 +
>> >> .../vfio/platform/reset/vfio_platform_bcmflexrm.c | 100 +++++++++++++++++++++
>> >> 3 files changed, 110 insertions(+)
>> >> create mode 100644 drivers/vfio/platform/reset/vfio_platform_bcmflexrm.c
>> >>
>> >> diff --git a/drivers/vfio/platform/reset/Kconfig b/drivers/vfio/platform/reset/Kconfig
>> >> index 70cccc5..392e3c0 100644
>> >> --- a/drivers/vfio/platform/reset/Kconfig
>> >> +++ b/drivers/vfio/platform/reset/Kconfig
>> >> @@ -13,3 +13,12 @@ config VFIO_PLATFORM_AMDXGBE_RESET
>> >> Enables the VFIO platform driver to handle reset for AMD XGBE
>> >>
>> >> If you don't know what to do here, say N.
>> >> +
>> >> +config VFIO_PLATFORM_BCMFLEXRM_RESET
>> >> + tristate "VFIO support for Broadcom FlexRM reset"
>> >> + depends on VFIO_PLATFORM && (ARCH_BCM_IPROC || COMPILE_TEST)
>> >> + default ARCH_BCM_IPROC
>> >> + help
>> >> + Enables the VFIO platform driver to handle reset for Broadcom FlexRM
>> >> +
>> >> + If you don't know what to do here, say N.
>> >> diff --git a/drivers/vfio/platform/reset/Makefile b/drivers/vfio/platform/reset/Makefile
>> >> index 93f4e23..8d9874b 100644
>> >> --- a/drivers/vfio/platform/reset/Makefile
>> >> +++ b/drivers/vfio/platform/reset/Makefile
>> >> @@ -5,3 +5,4 @@ ccflags-y += -Idrivers/vfio/platform
>> >>
>> >> obj-$(CONFIG_VFIO_PLATFORM_CALXEDAXGMAC_RESET) += vfio-platform-calxedaxgmac.o
>> >> obj-$(CONFIG_VFIO_PLATFORM_AMDXGBE_RESET) += vfio-platform-amdxgbe.o
>> >> +obj-$(CONFIG_VFIO_PLATFORM_BCMFLEXRM_RESET) += vfio_platform_bcmflexrm.o
>> >> diff --git a/drivers/vfio/platform/reset/vfio_platform_bcmflexrm.c b/drivers/vfio/platform/reset/vfio_platform_bcmflexrm.c
>> >> new file mode 100644
>> >> index 0000000..966a813
>> >> --- /dev/null
>> >> +++ b/drivers/vfio/platform/reset/vfio_platform_bcmflexrm.c
>> >> @@ -0,0 +1,100 @@
>> >> +/*
>> >> + * Copyright (C) 2017 Broadcom
>> >> + *
>> >> + * This program is free software; you can redistribute it and/or modify
>> >> + * it under the terms of the GNU General Public License version 2 as
>> >> + * published by the Free Software Foundation.
>> >> + *
>> >> + * This program is distributed in the hope that it will be useful,
>> >> + * but WITHOUT ANY WARRANTY; without even the implied warranty of
>> >> + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
>> >> + * GNU General Public License for more details.
>> >> + *
>> >> + * You should have received a copy of the GNU General Public License
>> >> + * along with this program. If not, see <http://www.gnu.org/licenses/>.
>> >> + */
>> >> +
>> >> +/*
>> >> + * This driver provides reset support for Broadcom FlexRM ring manager
>> >> + * to VFIO platform.
>> >> + */
>> >> +
>> >> +#include <linux/delay.h>
>> >> +#include <linux/init.h>
>> >> +#include <linux/io.h>
>> >> +#include <linux/kernel.h>
>> >> +#include <linux/module.h>
>> >> +
>> >> +#include "vfio_platform_private.h"
>> >> +
>> >> +/* FlexRM configuration */
>> >> +#define RING_REGS_SIZE 0x10000
>> >> +#define RING_VER_MAGIC 0x76303031
>> >> +
>> >> +/* Per-Ring register offsets */
>> >> +#define RING_VER 0x000
>> >> +#define RING_CONTROL 0x034
>> >> +#define RING_FLUSH_DONE 0x038
>> >> +
>> >> +/* Register RING_CONTROL fields */
>> >> +#define CONTROL_FLUSH_SHIFT 5
>> >> +
>> >> +/* Register RING_FLUSH_DONE fields */
>> >> +#define FLUSH_DONE_MASK 0x1
>> >> +
>> >> +static int vfio_platform_bcmflexrm_shutdown(void __iomem *ring)
>> >> +{
>> >> + unsigned int timeout;
>> >> +
>> >> + /* Disable/inactivate ring */
>> >> + writel_relaxed(0x0, ring + RING_CONTROL);
>> >> +
>> >> + /* Flush ring with timeout of 1s */
>> >> + timeout = 1000;
>> >
>> > Perhaps a #define for this value?
>>
>> This magic value 1000 makes it explicit that we try till 1 second
>> because inside the loop we have mdelay(1).
>>
>> >
>> >> + writel_relaxed(BIT(CONTROL_FLUSH_SHIFT), ring + RING_CONTROL);
>> >> + do {
>> >> + if (readl_relaxed(ring + RING_FLUSH_DONE) & FLUSH_DONE_MASK)
>> >> + break;
>> >> + mdelay(1);
>> >> + } while (--timeout);
>> >> +
>> >> + if (!timeout) {
>> >> + pr_warn("VFIO FlexRM shutdown timeout\n");
>
> Since you're planning a new version anyway, perhaps we could also pass
> the device through and use a dev_warn here so we can associate this
> error to a specific device. Perhaps even knowing which ring on the
> device encountered the timeout would be useful. Thanks,

Sure, will do.

Regards,
Anup