[PATCH 3/3] ARM: dts: keystone-k2g-evm: add bindings for SPI NOR flash

[Franklin S Cooper Jr]

From: Murali Karicheri <m-karicheri2@xxxxxx>

K2G EVM has n25q128a13 SPI NOR flash on SPI1. Enable SPI1 in the DT
node as well as add a subnode for the SPI NOR.

Signed-off-by: Murali Karicheri <m-karicheri2@xxxxxx>
Signed-off-by: Franklin S Cooper Jr <fcooper@xxxxxx>
---
 arch/arm/boot/dts/keystone-k2g-evm.dts | 37 ++++++++++++++++++++++++++++++++++
 1 file changed, 37 insertions(+)

diff --git a/arch/arm/boot/dts/keystone-k2g-evm.dts b/arch/arm/boot/dts/keystone-k2g-evm.dts
index f462f10..d5c43c7 100644
--- a/arch/arm/boot/dts/keystone-k2g-evm.dts
+++ b/arch/arm/boot/dts/keystone-k2g-evm.dts
@@ -81,6 +81,16 @@
 			K2G_CORE_IOPAD(0x1110) (BUFFER_CLASS_B | PIN_PULLUP | MUX_MODE0)	/* mmc1_cmd.mmc1_cmd */
 		>;
 	};
+
+	spi1_pins: pinmux_spi1_pins {
+		pinctrl-single,pins = <
+			K2G_CORE_IOPAD(0x11a4) (BUFFER_CLASS_B | PULL_DISABLE | MUX_MODE0)	/* spi1_scs0.spi1_scs0 */
+			K2G_CORE_IOPAD(0x11ac) (BUFFER_CLASS_B | PULL_DISABLE | MUX_MODE0)	/* spi1_clk.spi1_clk */
+			K2G_CORE_IOPAD(0x11b0) (BUFFER_CLASS_B | PULL_DISABLE | MUX_MODE0)	/* spi1_miso.spi1_miso */
+			K2G_CORE_IOPAD(0x11b4) (BUFFER_CLASS_B | PULL_DISABLE | MUX_MODE0)	/* spi1_mosi.spi1_mosi */
+		>;
+	};
+
 };
 
 &uart0 {
@@ -112,3 +122,30 @@
 	memory-region = <&dsp_common_memory>;
 	status = "okay";
 };
+
+&spi1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&spi1_pins>;
+	status = "okay";
+
+	spi_nor: flash@0 {
+		#address-cells = <1>;
+		#size-cells = <1>;
+		compatible = "jedec,spi-nor";
+		spi-max-frequency = <5000000>;
+		m25p,fast-read;
+		reg = <0>;
+
+		partition@0 {
+			label = "u-boot-spl";
+			reg = <0x0 0x100000>;
+			read-only;
+		};
+
+		partition@1 {
+			label = "misc";
+			reg = <0x100000 0xf00000>;
+		};
+	};
+};
+
-- 
2.9.4.dirty