Re: [PATCH v2 10/11] staging: typec: fusb302: Hook up mux support using tcpc_gen_mux support

[Rob Herring]

On Tue, Sep 05, 2017 at 06:42:20PM +0200, Hans de Goede wrote:
> Add mux support to the fusb302 driver, call devm_tcpc_gen_mux_create()
> to let the generic tcpc_mux_dev code create a tcpc_mux_dev for us.
> 
> Also document the mux-names used by the generic tcpc_mux_dev code in
> our devicetree bindings.
> 
> Cc: Rob Herring <robh+dt@xxxxxxxxxx>
> Cc: Mark Rutland <mark.rutland@xxxxxxx>
> Cc: devicetree@xxxxxxxxxxxxxxx
> Signed-off-by: Hans de Goede <hdegoede@xxxxxxxxxx>
> ---
>  Documentation/devicetree/bindings/usb/fcs,fusb302.txt |  3 +++
>  drivers/staging/typec/fusb302/fusb302.c               | 11 ++++++++++-
>  2 files changed, 13 insertions(+), 1 deletion(-)
> 
> diff --git a/Documentation/devicetree/bindings/usb/fcs,fusb302.txt b/Documentation/devicetree/bindings/usb/fcs,fusb302.txt
> index 472facfa5a71..63d639eadacd 100644
> --- a/Documentation/devicetree/bindings/usb/fcs,fusb302.txt
> +++ b/Documentation/devicetree/bindings/usb/fcs,fusb302.txt
> @@ -6,6 +6,9 @@ Required properties :
>  - interrupts             : Interrupt specifier
>  
>  Optional properties :
> +- mux-controls           : List of mux-ctrl-specifiers containing 1 or 2 muxes
> +- mux-names              : "type-c-mode-mux" when using 1 mux, or
> +                           "type-c-mode-mux", "usb-role-mux" when using 2 muxes

I'm not sure this is the right place for this. The mux is outside the 
FUSB302. In a type-C connector node or USB phy node would make more 
sense to me.

>  - fcs,max-sink-microvolt : Maximum voltage to negotiate when configured as sink
>  - fcs,max-sink-microamp  : Maximum current to negotiate when configured as sink
>  - fcs,max-sink-microwatt : Maximum power to negotiate when configured as sink