Re: [PATCH] thermal: brcmstb: disable trip points properly when needed

From: Markus Mayer
Date: Thu Sep 14 2017 - 19:25:42 EST


On 14 September 2017 at 16:19, Markus Mayer <code@xxxxxxxxxx> wrote:
> From: Markus Mayer <mmayer@xxxxxxxxxxxx>
>
> The code checking for low and high temperature points was still based
> on an earlier implementation of the driver. It wasn't working properly
> with the data types currently being used.
>
> We fix this by disabling the high trip point if our high temperature is
> INT_MAX and disabling the low trip point if our low temperature is -INT_MAX
> (or lower).
>
> Signed-off-by: Markus Mayer <mmayer@xxxxxxxxxxxx>
> ---
>
> Here is my patch for the issue described. Please let me know if I should be
> squashing this into the driver patch and re-submit the entire series.

Looks like my attempt at adding this patch to the existing thread may
not have worked out so well.

Here's a link: https://marc.info/?l=linux-pm&m=150472721929919&w=2

> drivers/thermal/broadcom/brcmstb_thermal.c | 21 +++++++++++----------
> 1 file changed, 11 insertions(+), 10 deletions(-)
>
> diff --git a/drivers/thermal/broadcom/brcmstb_thermal.c b/drivers/thermal/broadcom/brcmstb_thermal.c
> index 87b8e7a..1919f91 100644
> --- a/drivers/thermal/broadcom/brcmstb_thermal.c
> +++ b/drivers/thermal/broadcom/brcmstb_thermal.c
> @@ -277,22 +277,23 @@ static int brcmstb_set_trips(void *data, int low, int high)
>
> dev_dbg(priv->dev, "set trips %d <--> %d\n", low, high);
>
> - if (low) {
> - if (low > INT_MAX)
> - low = INT_MAX;
> + /*
> + * Disable low-temp if "low" is too small. As per thermal framework
> + * API, we use -INT_MAX rather than INT_MIN.
> + */
> + if (low <= -INT_MAX) {
> + avs_tmon_trip_enable(priv, TMON_TRIP_TYPE_LOW, 0);
> + } else {
> avs_tmon_set_trip_temp(priv, TMON_TRIP_TYPE_LOW, low);
> avs_tmon_trip_enable(priv, TMON_TRIP_TYPE_LOW, 1);
> - } else {
> - avs_tmon_trip_enable(priv, TMON_TRIP_TYPE_LOW, 0);
> }
>
> - if (high < ULONG_MAX) {
> - if (high > INT_MAX)
> - high = INT_MAX;
> + /* Disable high-temp if "high" is too big. */
> + if (high == INT_MAX) {
> + avs_tmon_trip_enable(priv, TMON_TRIP_TYPE_HIGH, 0);
> + } else {
> avs_tmon_set_trip_temp(priv, TMON_TRIP_TYPE_HIGH, high);
> avs_tmon_trip_enable(priv, TMON_TRIP_TYPE_HIGH, 1);
> - } else {
> - avs_tmon_trip_enable(priv, TMON_TRIP_TYPE_HIGH, 0);
> }
>
> return 0;
> --
> 2.7.4
>