Re: [PATCH v2 01/10] dmaengine: sun6i: Correct setting of clock autogating register for A83T/H3

[Maxime Ripard]

Hi,

On Sun, Sep 17, 2017 at 05:19:47AM +0200, Stefan Brüns wrote:
> The H83T uses a compatible string different from the A23, but requires
> the same clock autogating register setting.
> 
> The H3 also requires setting the clock autogating register, but has
> the register at a different offset.
> 
> Add three suitable callbacks for the existing controller generations
> and set it in the controller config structure.
> 
> Signed-off-by: Stefan Brüns <stefan.bruens@xxxxxxxxxxxxxx>
> ---
>  drivers/dma/sun6i-dma.c | 31 ++++++++++++++++++++++++++-----
>  1 file changed, 26 insertions(+), 5 deletions(-)
> 
> diff --git a/drivers/dma/sun6i-dma.c b/drivers/dma/sun6i-dma.c
> index bcd496edc70f..45bcd5271d94 100644
> --- a/drivers/dma/sun6i-dma.c
> +++ b/drivers/dma/sun6i-dma.c
> @@ -48,6 +48,9 @@
>  #define SUN8I_DMA_GATE		0x20
>  #define SUN8I_DMA_GATE_ENABLE	0x4
>  
> +#define SUNXI_H3_SECURE_REG		0x20
> +#define SUNXI_H3_DMA_GATE		0x28
> +#define SUNXI_H3_DMA_GATE_ENABLE	0x4
>  /*
>   * Channels specific registers
>   */
> @@ -111,7 +114,7 @@ struct sun6i_dma_config {
>  	 * however these SoCs really have and need this bit, as seen in the
>  	 * BSP kernel source code.
>  	 */
> -	bool gate_needed;
> +	void (*clock_autogate_enable)();
>  };
>  
>  /*
> @@ -267,6 +270,20 @@ static inline s8 convert_buswidth(enum dma_slave_buswidth addr_width)
>  	return addr_width >> 1;
>  }
>  
> +static void sun6i_enable_clock_autogate_noop(struct sun6i_dma_dev *sdev)
> +{
> +}

I guess instead of that one, we could just test for the pointer and
not call the function if it's NULL?

Looks good otherwise, once fixed, you have
Acked-by: Maxime Ripard <maxime.ripard@xxxxxxxxxxxxxxxxxx>

Maxime

-- 
Maxime Ripard, Free Electrons
Embedded Linux and Kernel engineering
http://free-electrons.com

Attachment: signature.asc
Description: PGP signature