Re: alpha runtime warnings due to commit 0e4c2eeb758 ("alpha/PCI: Replace pci_fixup_irqs() call with host ...")

[Lorenzo Pieralisi]

On Mon, Sep 18, 2017 at 07:00:55PM -0700, Guenter Roeck wrote:
> Hi,
> 
> I see the following runtime warnings in mainline when running alpha images in qemu.
> 
> 
> Floppy drive(s): fd0 is 2.88M
> ide0: disabled, no IRQ
> ide0: failed to initialize IDE interface
> ide0: disabling port
> cmd64x 0000:00:02.0: IDE controller (0x1095:0x0646 rev 0x07)
> CMD64x_IDE 0000:00:02.0: BAR 0: can't reserve [io  0x8050-0x8057]
> cmd64x 0000:00:02.0: can't reserve resources
> CMD64x_IDE: probe of 0000:00:02.0 failed with error -16
> ide_generic: please use "probe_mask=0x3f" module parameter for probing all legacy ISA IDE ports
> ------------[ cut here ]------------
> WARNING: CPU: 0 PID: 1 at fs/sysfs/dir.c:31 sysfs_warn_dup+0x94/0xd0
> sysfs: cannot create duplicate filename '/class/ide_port/ide0'
> ...
> 
> Trace:
> [<fffffc00003308a0>] __warn+0x160/0x190
> [<fffffc000048c9f4>] sysfs_warn_dup+0x94/0xd0
> [<fffffc0000330928>] warn_slowpath_fmt+0x58/0x70
> [<fffffc000048c9f4>] sysfs_warn_dup+0x94/0xd0
> [<fffffc0000486d40>] kernfs_path_from_node+0x30/0x60
> [<fffffc00004874ac>] kernfs_put+0x16c/0x2c0
> [<fffffc00004874ac>] kernfs_put+0x16c/0x2c0
> [<fffffc000048d010>] sysfs_do_create_link_sd.isra.2+0x100/0x120
> [<fffffc00005b9d64>] device_add+0x2a4/0x7c0
> [<fffffc00005ba5cc>] device_create_groups_vargs+0x14c/0x170
> [<fffffc00005ba518>] device_create_groups_vargs+0x98/0x170
> [<fffffc00005ba690>] device_create+0x50/0x70
> [<fffffc00005df36c>] ide_host_register+0x48c/0xa00
> [<fffffc00005df330>] ide_host_register+0x450/0xa00
> [<fffffc00005ba2a0>] device_register+0x20/0x50
> [<fffffc00005df330>] ide_host_register+0x450/0xa00
> [<fffffc00005df944>] ide_host_add+0x64/0xe0
> [<fffffc000079b41c>] kobject_uevent_env+0x16c/0x710
> [<fffffc0000310288>] do_one_initcall+0x68/0x260
> [<fffffc00007b13bc>] kernel_init+0x1c/0x1a0
> [<fffffc00007b13a0>] kernel_init+0x0/0x1a0
> [<fffffc0000311868>] ret_from_kernel_thread+0x18/0x20
> [<fffffc00007b13a0>] kernel_init+0x0/0x1a0
> 
> ---[ end trace 24a70433c3e4d374 ]---
> ide0: disabling port
> 
> [ multiple times ]
> 
> A complete log is available at http://kerneltests.org/builders/qemu-alpha-master.
> 
> Prior to the offending commit, the kernel log looks as follows.
> 
> ...
> Uniform Multi-Platform E-IDE driver
> cmd64x 0000:00:02.0: IDE controller (0x1095:0x0646 rev 0x07)
> cmd64x 0000:00:02.0: IDE port disabled
> cmd64x 0000:00:02.0: 100% native mode on irq 28
> PCI: Setting latency timer of device 0000:00:02.0 to 64
>     ide0: BM-DMA at 0x8040-0x8047
> Floppy drive(s): fd0 is 2.88M
> ide0 at 0x8050-0x8057,0x8062 on irq 28 (serialized)
> ide_generic: please use "probe_mask=0x3f" module parameter for probing all legacy ISA IDE ports
> ide1 at 0x1f0-0x1f7,0x3f6 on irq 14
> ide2 at 0x170-0x177,0x376 on irq 15
> ide-gd driver 1.18
> ide-cd driver 5.00
> ...
> 
> Reverting the commit is not possible due to context changes.
> 
> Bisect log is attached.

Ok thanks. Can you please check if the diff below fixes the issue ?

I think the problem is that now we allocate the IRQ at device_probe
instead of device_add time, if the patch below fixes the issue the
question is whether we want to move pci_assign_irq() to pci_device_add()
for ALL PCI devices or just fix this for IDE subsytem.

Lorenzo

-- >8 --
diff --git a/drivers/ide/setup-pci.c b/drivers/ide/setup-pci.c
index 112d2fe..94ca9cc 100644
--- a/drivers/ide/setup-pci.c
+++ b/drivers/ide/setup-pci.c
@@ -502,6 +502,8 @@ static int do_ide_setup_pci_device(struct pci_dev *dev,
 {
 	int pciirq, ret;
 
+	pci_assign_irq(dev);
+
 	/*
 	 * Can we trust the reported IRQ?
 	 */
--
To unsubscribe from this list: send the line "unsubscribe linux-alpha" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at  http://vger.kernel.org/majordomo-info.html