Re: [PATCH RESEND 1/2] phy: phy-mtk-tphy: fix NULL point of chip bank

[Chunfeng Yun]

On Thu, 2017-09-21 at 16:23 +0530, Kishon Vijay Abraham I wrote:
> 
> On Thursday 21 September 2017 04:01 PM, Chunfeng Yun wrote:
> > Chip bank of version-1 is initialized as NULL, but it's used
> > by pcie_phy_instance_power_on/off(), so assign it a right
> > address.
> 
> merged. How was this not noticed before?

The PCIe function was tested on mt2712 with tphy-v2, and didn't notice
this issue until tested it on mt7622 with tphy-v1.

Ashamed of myself for making such a rookie mistake.
> 
> Thanks
> Kishon
> > 
> > Signed-off-by: Chunfeng Yun <chunfeng.yun@xxxxxxxxxxxx>
> > ---
> >  drivers/phy/mediatek/phy-mtk-tphy.c |    3 ++-
> >  1 file changed, 2 insertions(+), 1 deletion(-)
> > 
> > diff --git a/drivers/phy/mediatek/phy-mtk-tphy.c b/drivers/phy/mediatek/phy-mtk-tphy.c
> > index e3baad7..721a2a1 100644
> > --- a/drivers/phy/mediatek/phy-mtk-tphy.c
> > +++ b/drivers/phy/mediatek/phy-mtk-tphy.c
> > @@ -27,6 +27,7 @@
> >  /* banks shared by multiple phys */
> >  #define SSUSB_SIFSLV_V1_SPLLC		0x000	/* shared by u3 phys */
> >  #define SSUSB_SIFSLV_V1_U2FREQ		0x100	/* shared by u2 phys */
> > +#define SSUSB_SIFSLV_V1_CHIP		0x300	/* shared by u3 phys */
> >  /* u2 phy bank */
> >  #define SSUSB_SIFSLV_V1_U2PHY_COM	0x000
> >  /* u3/pcie/sata phy banks */
> > @@ -762,7 +763,7 @@ static void phy_v1_banks_init(struct mtk_tphy *tphy,
> >  	case PHY_TYPE_USB3:
> >  	case PHY_TYPE_PCIE:
> >  		u3_banks->spllc = tphy->sif_base + SSUSB_SIFSLV_V1_SPLLC;
> > -		u3_banks->chip = NULL;
> > +		u3_banks->chip = tphy->sif_base + SSUSB_SIFSLV_V1_CHIP;
> >  		u3_banks->phyd = instance->port_base + SSUSB_SIFSLV_V1_U3PHYD;
> >  		u3_banks->phya = instance->port_base + SSUSB_SIFSLV_V1_U3PHYA;
> >  		break;
> >