[PATCH net-next v3 1/2] net: dsa: make slave close symmetrical to open

[Vivien Didelot]

The DSA slave open function configures the unicast MAC addresses on the
master device, enable the switch port, change its STP state, then start
the PHY device.

Make the close function symmetric, by first stopping the PHY device,
then changing the STP state, disabling the switch port and restore the
master device.

Signed-off-by: Vivien Didelot <vivien.didelot@xxxxxxxxxxxxxxxxxxxx>
Reviewed-by: Florian Fainelli <f.fainelli@xxxxxxxxx>
Reviewed-by: Andrew Lunn <andrew@xxxxxxx>
---
 net/dsa/slave.c | 10 +++++-----
 1 file changed, 5 insertions(+), 5 deletions(-)

diff --git a/net/dsa/slave.c b/net/dsa/slave.c
index 02ace7d462c4..c2bb48579032 100644
--- a/net/dsa/slave.c
+++ b/net/dsa/slave.c
@@ -133,6 +133,11 @@ static int dsa_slave_close(struct net_device *dev)
 	if (p->phy)
 		phy_stop(p->phy);
 
+	dsa_port_set_state_now(p->dp, BR_STATE_DISABLED);
+
+	if (ds->ops->port_disable)
+		ds->ops->port_disable(ds, p->dp->index, p->phy);
+
 	dev_mc_unsync(master, dev);
 	dev_uc_unsync(master, dev);
 	if (dev->flags & IFF_ALLMULTI)
@@ -143,11 +148,6 @@ static int dsa_slave_close(struct net_device *dev)
 	if (!ether_addr_equal(dev->dev_addr, master->dev_addr))
 		dev_uc_del(master, dev->dev_addr);
 
-	if (ds->ops->port_disable)
-		ds->ops->port_disable(ds, p->dp->index, p->phy);
-
-	dsa_port_set_state_now(p->dp, BR_STATE_DISABLED);
-
 	return 0;
 }
 
-- 
2.14.1