[PATCH 4.9 58/77] ARC: Re-enable MMU upon Machine Check exception

[Greg Kroah-Hartman]

4.9-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Jose Abreu <Jose.Abreu@xxxxxxxxxxxx>

commit 1ee55a8f7f6b7ca4c0c59e0b4b4e3584a085c2d3 upstream.

I recently came upon a scenario where I would get a double fault
machine check exception tiriggered by a kernel module.
However the ensuing crash stacktrace (ksym lookup) was not working
correctly.

Turns out that machine check auto-disables MMU while modules are allocated
in kernel vaddr spapce.

This patch re-enables the MMU before start printing the stacktrace
making stacktracing of modules work upon a fatal exception.

Signed-off-by: Jose Abreu <joabreu@xxxxxxxxxxxx>
Reviewed-by: Alexey Brodkin <abrodkin@xxxxxxxxxxxx>
Signed-off-by: Vineet Gupta <vgupta@xxxxxxxxxxxx>
[vgupta: moved code into low level handler to avoid in 2 places]
Signed-off-by: Greg Kroah-Hartman <gregkh@xxxxxxxxxxxxxxxxxxx>

---
 arch/arc/kernel/entry.S |    6 ++++++
 arch/arc/mm/tlb.c       |    3 ---
 2 files changed, 6 insertions(+), 3 deletions(-)

--- a/arch/arc/kernel/entry.S
+++ b/arch/arc/kernel/entry.S
@@ -92,6 +92,12 @@ ENTRY(EV_MachineCheck)
 	lr  r0, [efa]
 	mov r1, sp
 
+	; hardware auto-disables MMU, re-enable it to allow kernel vaddr
+	; access for say stack unwinding of modules for crash dumps
+	lr	r3, [ARC_REG_PID]
+	or	r3, r3, MMU_ENABLE
+	sr	r3, [ARC_REG_PID]
+
 	lsr  	r3, r2, 8
 	bmsk 	r3, r3, 7
 	brne    r3, ECR_C_MCHK_DUP_TLB, 1f
--- a/arch/arc/mm/tlb.c
+++ b/arch/arc/mm/tlb.c
@@ -896,9 +896,6 @@ void do_tlb_overlap_fault(unsigned long
 
 	local_irq_save(flags);
 
-	/* re-enable the MMU */
-	write_aux_reg(ARC_REG_PID, MMU_ENABLE | read_aux_reg(ARC_REG_PID));
-
 	/* loop thru all sets of TLB */
 	for (set = 0; set < mmu->sets; set++) {