This commit adds support for Mitsubishi aa070mc01 TFT panel working
with 8 bit ISP mode (pin 19 "mode" HIGH for 20 pin TFT connector).
Signed-off-by: Lukasz Majewski <lukma@xxxxxxx>
---
drivers/gpu/drm/panel/panel-simple.c | 35 +++++++++++++++++++++++++++++++++++
1 file changed, 35 insertions(+)
diff --git a/drivers/gpu/drm/panel/panel-simple.c b/drivers/gpu/drm/panel/panel-simple.c
index 3d2cb8b..0c64ec6 100644
--- a/drivers/gpu/drm/panel/panel-simple.c
+++ b/drivers/gpu/drm/panel/panel-simple.c
@@ -1141,6 +1141,38 @@ static const struct panel_desc innolux_g121x1_l03 = {
},
};
+static const struct drm_display_mode mitsubishi_aa070mc01_mode = {
+ .clock = 30400,
+ .hdisplay = 800,
+ .hsync_start = 800 + 0,
+ .hsync_end = 800 + 1,
+ .htotal = 800 + 0 + 1 + 160,
+ .vdisplay = 480,
+ .vsync_start = 480 + 0,
+ .vsync_end = 480 + 48 + 1,
+ .vtotal = 480 + 48 + 1 + 0,
+ .vrefresh = 60,
+ .flags = DRM_MODE_FLAG_NHSYNC | DRM_MODE_FLAG_NVSYNC,
+};
+
+static const struct panel_desc mitsubishi_aa070mc01 = {
+ .modes = &mitsubishi_aa070mc01_mode,
+ .num_modes = 1,
+ .bpc = 8,
+ .size = {
+ .width = 152,
+ .height = 91,
+ },
+
+ .delay = {
+ .enable = 200,
+ .unprepare = 200,
+ .disable = 400,
+ },
+ .bus_format = MEDIA_BUS_FMT_RGB888_1X7X4_SPWG,
+ .bus_flags = DRM_BUS_FLAG_DE_HIGH,
+};
+
static const struct drm_display_mode innolux_n116bge_mode = {
.clock = 76420,
.hdisplay = 1366,
@@ -2029,6 +2061,9 @@ static const struct of_device_id platform_of_match[] = {
.compatible = "innolux,g121x1-l03",
.data = &innolux_g121x1_l03,
}, {
+ .compatible = "mitsubishi,aa070mc01-ca1",
+ .data = &mitsubishi_aa070mc01,
+ }, {
.compatible = "innolux,n116bge",
.data = &innolux_n116bge,
}, {