[PATCH][trivial] Kconfig: Fix typos in Kconfig
From: Masanari Iida
Date: Mon Sep 25 2017 - 00:56:45 EST
This patch fix some spelling typos found in Kconfig files.
Signed-off-by: Masanari Iida <standby24x7@xxxxxxxxx>
---
arch/alpha/Kconfig | 2 +-
arch/arc/Kconfig | 6 +++---
arch/arm/mach-bcm/Kconfig | 4 ++--
arch/arm/plat-samsung/Kconfig | 2 +-
arch/arm64/Kconfig | 2 +-
arch/powerpc/platforms/Kconfig | 2 +-
arch/unicore32/Kconfig | 2 +-
arch/xtensa/Kconfig | 2 +-
drivers/net/ethernet/aquantia/Kconfig | 2 +-
drivers/nfc/st-nci/Kconfig | 4 ++--
drivers/nvdimm/Kconfig | 2 +-
drivers/platform/x86/Kconfig | 2 +-
drivers/power/supply/Kconfig | 2 +-
drivers/scsi/Kconfig | 2 +-
fs/notify/fanotify/Kconfig | 2 +-
15 files changed, 19 insertions(+), 19 deletions(-)
diff --git a/arch/alpha/Kconfig b/arch/alpha/Kconfig
index 0e49d39ea74a..aa6b11957cd7 100644
--- a/arch/alpha/Kconfig
+++ b/arch/alpha/Kconfig
@@ -505,7 +505,7 @@ config ALPHA_QEMU
Generic kernels will auto-detect QEMU. But when building a
system-specific kernel, the assumption is that we want to
- elimiate as many runtime tests as possible.
+ eliminate as many runtime tests as possible.
If unsure, say N.
diff --git a/arch/arc/Kconfig b/arch/arc/Kconfig
index a598641eed98..eab4ba316a58 100644
--- a/arch/arc/Kconfig
+++ b/arch/arc/Kconfig
@@ -298,7 +298,7 @@ config ARC_MMU_V1
config ARC_MMU_V2
bool "MMU v2"
help
- Fixed the deficiency of v1 - possible thrashing in memcpy sceanrio
+ Fixed the deficiency of v1 - possible thrashing in memcpy scenario
when 2 D-TLB and 1 I-TLB entries index into same 2way set.
config ARC_MMU_V3
@@ -371,7 +371,7 @@ config ARC_FPU_SAVE_RESTORE
bool "Enable FPU state persistence across context switch"
default n
help
- Double Precision Floating Point unit had dedictaed regs which
+ Double Precision Floating Point unit had dedicated regs which
need to be saved/restored across context-switch.
Note that ARC FPU is overly simplistic, unlike say x86, which has
hardware pieces to allow software to conditionally save/restore,
@@ -467,7 +467,7 @@ config ARC_PLAT_NEEDS_PHYS_TO_DMA
bool
config ARC_KVADDR_SIZE
- int "Kernel Virtaul Address Space size (MB)"
+ int "Kernel Virtual Address Space size (MB)"
range 0 512
default "256"
help
diff --git a/arch/arm/mach-bcm/Kconfig b/arch/arm/mach-bcm/Kconfig
index 73be3d578851..0bb7e74e1d87 100644
--- a/arch/arm/mach-bcm/Kconfig
+++ b/arch/arm/mach-bcm/Kconfig
@@ -22,7 +22,7 @@ config ARCH_BCM_IPROC
help
This enables support for systems based on Broadcom IPROC architected SoCs.
The IPROC complex contains one or more ARM CPUs along with common
- core periperals. Application specific SoCs are created by adding a
+ core peripherals. Application specific SoCs are created by adding a
uArchitecture containing peripherals outside of the IPROC complex.
Currently supported SoCs are Cygnus.
@@ -69,7 +69,7 @@ config ARCH_BCM_5301X
This is a network SoC line mostly used in home routers and
wifi access points, it's internal name is Northstar.
- This inclused the following SoC: BCM53010, BCM53011, BCM53012,
+ This include the following SoC: BCM53010, BCM53011, BCM53012,
BCM53014, BCM53015, BCM53016, BCM53017, BCM53018, BCM4707,
BCM4708 and BCM4709.
diff --git a/arch/arm/plat-samsung/Kconfig b/arch/arm/plat-samsung/Kconfig
index e8229b9fee4a..8d4a64cc644c 100644
--- a/arch/arm/plat-samsung/Kconfig
+++ b/arch/arm/plat-samsung/Kconfig
@@ -278,7 +278,7 @@ config SAMSUNG_PM_CHECK_CHUNKSIZE
help
Set the chunksize in Kilobytes of the CRC for checking memory
corruption over suspend and resume. A smaller value will mean that
- the CRC data block will take more memory, but wil identify any
+ the CRC data block will take more memory, but will identify any
faults with better precision.
See <file:Documentation/arm/Samsung-S3C24XX/Suspend.txt>
diff --git a/arch/arm64/Kconfig b/arch/arm64/Kconfig
index 0df64a6a56d4..416dbc637dc8 100644
--- a/arch/arm64/Kconfig
+++ b/arch/arm64/Kconfig
@@ -946,7 +946,7 @@ config ARM64_UAO
help
User Access Override (UAO; part of the ARMv8.2 Extensions)
causes the 'unprivileged' variant of the load/store instructions to
- be overriden to be privileged.
+ be overridden to be privileged.
This option changes get_user() and friends to use the 'unprivileged'
variant of the load/store instructions. This ensures that user-space
diff --git a/arch/powerpc/platforms/Kconfig b/arch/powerpc/platforms/Kconfig
index 4fd64d3f5c44..aac89f51d824 100644
--- a/arch/powerpc/platforms/Kconfig
+++ b/arch/powerpc/platforms/Kconfig
@@ -78,7 +78,7 @@ config UDBG_RTAS_CONSOLE
config PPC_SMP_MUXED_IPI
bool
help
- Select this opton if your platform supports SMP and your
+ Select this option if your platform supports SMP and your
interrupt controller provides less than 4 interrupts to each
cpu. This will enable the generic code to multiplex the 4
messages on to one ipi.
diff --git a/arch/unicore32/Kconfig b/arch/unicore32/Kconfig
index 0769066929c6..ac4c47201e5e 100644
--- a/arch/unicore32/Kconfig
+++ b/arch/unicore32/Kconfig
@@ -114,7 +114,7 @@ endif
source "arch/unicore32/mm/Kconfig"
-comment "Floating poing support"
+comment "Floating point support"
config UNICORE_FPU_F64
def_bool y if !ARCH_FPGA
diff --git a/arch/xtensa/Kconfig b/arch/xtensa/Kconfig
index 7ad6d77b2f22..9b8747ed3134 100644
--- a/arch/xtensa/Kconfig
+++ b/arch/xtensa/Kconfig
@@ -223,7 +223,7 @@ config INITIALIZE_XTENSA_MMU_INSIDE_VMLINUX
then enter your normal kernel breakpoints once the MMU was mapped
to the kernel mappings (0XC0000000).
- This unfortunately doesn't work for U-Boot and likley also wont
+ This unfortunately doesn't work for U-Boot and likely also wont
work for using KEXEC to have a hot kernel ready for doing a
KDUMP.
diff --git a/drivers/net/ethernet/aquantia/Kconfig b/drivers/net/ethernet/aquantia/Kconfig
index cdf78e069a39..7d623e90dc19 100644
--- a/drivers/net/ethernet/aquantia/Kconfig
+++ b/drivers/net/ethernet/aquantia/Kconfig
@@ -9,7 +9,7 @@ config NET_VENDOR_AQUANTIA
Set this to y if you have an Ethernet network cards that uses the aQuantia
AQC107/AQC108 chipset.
- This option does not build any drivers; it casues the aQuantia
+ This option does not build any drivers; it causes the aQuantia
drivers that can be built to appear in the list of Ethernet drivers.
diff --git a/drivers/nfc/st-nci/Kconfig b/drivers/nfc/st-nci/Kconfig
index dc9b777d78f6..5c6e21ccb19c 100644
--- a/drivers/nfc/st-nci/Kconfig
+++ b/drivers/nfc/st-nci/Kconfig
@@ -11,7 +11,7 @@ config NFC_ST_NCI_I2C
select NFC_ST_NCI
---help---
This module adds support for an I2C interface to the
- STMicroelectronics NFC NCI chips familly.
+ STMicroelectronics NFC NCI chips family.
Select this if your platform is using the i2c bus.
If you choose to build a module, it'll be called st-nci_i2c.
@@ -23,7 +23,7 @@ config NFC_ST_NCI_SPI
select NFC_ST_NCI
---help---
This module adds support for an SPI interface to the
- STMicroelectronics NFC NCI chips familly.
+ STMicroelectronics NFC NCI chips family.
Select this if your platform is using the spi bus.
If you choose to build a module, it'll be called st-nci_spi.
diff --git a/drivers/nvdimm/Kconfig b/drivers/nvdimm/Kconfig
index 5bdd499b5f4f..a65f2e1d9f53 100644
--- a/drivers/nvdimm/Kconfig
+++ b/drivers/nvdimm/Kconfig
@@ -96,7 +96,7 @@ config NVDIMM_DAX
help
Support raw device dax access to a persistent memory
namespace. For environments that want to hard partition
- peristent memory, this capability provides a mechanism to
+ persistent memory, this capability provides a mechanism to
sub-divide a namespace into character devices that can only be
accessed via DAX (mmap(2)).
diff --git a/drivers/platform/x86/Kconfig b/drivers/platform/x86/Kconfig
index 80b87954f6dd..09dac11337d1 100644
--- a/drivers/platform/x86/Kconfig
+++ b/drivers/platform/x86/Kconfig
@@ -774,7 +774,7 @@ config TOSHIBA_WMI
WARNING: This driver is incomplete as it lacks a proper keymap and the
*notify function only prints the ACPI event type value. Be warned that
you will need to provide some information if you have a Toshiba model
- with WMI event hotkeys and want to help with the develpment of this
+ with WMI event hotkeys and want to help with the development of this
driver.
If you have a WMI-based hotkeys Toshiba laptop, say Y or M here.
diff --git a/drivers/power/supply/Kconfig b/drivers/power/supply/Kconfig
index 5ab90c1f3f7c..382669bf31f4 100644
--- a/drivers/power/supply/Kconfig
+++ b/drivers/power/supply/Kconfig
@@ -182,7 +182,7 @@ config CHARGER_SBS
tristate "SBS Compliant charger"
depends on I2C
help
- Say Y to include support for SBS compilant battery chargers.
+ Say Y to include support for SBS compliant battery chargers.
config BATTERY_BQ27XXX
tristate "BQ27xxx battery driver"
diff --git a/drivers/scsi/Kconfig b/drivers/scsi/Kconfig
index 41366339b950..2b1cd3028749 100644
--- a/drivers/scsi/Kconfig
+++ b/drivers/scsi/Kconfig
@@ -786,7 +786,7 @@ config SCSI_IBMVSCSIS
depends on PPC_PSERIES && TARGET_CORE && SCSI && PCI
help
This is the IBM POWER Virtual SCSI Target Server
- This driver uses the SRP protocol for communication betwen servers
+ This driver uses the SRP protocol for communication between servers
guest and/or the host that run on the same server.
More information on VSCSI protocol can be found at www.power.org
diff --git a/fs/notify/fanotify/Kconfig b/fs/notify/fanotify/Kconfig
index e5f911bd80d2..41355ce74ac0 100644
--- a/fs/notify/fanotify/Kconfig
+++ b/fs/notify/fanotify/Kconfig
@@ -21,6 +21,6 @@ config FANOTIFY_ACCESS_PERMISSIONS
decisions concerning filesystem events. This is used by some fanotify
listeners which need to scan files before allowing the system access to
use those files. This is used by some anti-malware vendors and by some
- hierarchical storage managent systems.
+ hierarchical storage management systems.
If unsure, say N.
--
2.14.1.729.g59c0ea183ad1