Re: [PATCH v2 3/5] MIPS: jz4780: DTS: Probe the jz4740-watchdog driver from devicetree

[PrasannaKumar Muralidharan]

On 26 September 2017 at 18:56, Mathieu Malaterre <malat@xxxxxxxxxx> wrote:
> Hi PrasannaKumar !
>
> On Tue, Sep 26, 2017 at 3:17 PM, PrasannaKumar Muralidharan
> <prasannatsmkumar@xxxxxxxxx> wrote:
>> Hi Mathieu,
>>
>> On 16 September 2017 at 00:48, Mathieu Malaterre <malat@xxxxxxxxxx> wrote:
>>> The jz4740-watchdog driver supports both jz4740 & jz4780.
>>>
>>> Signed-off-by: Mathieu Malaterre <malat@xxxxxxxxxx>
>>> ---
>>> Changes in v2:
>>> * make the node name generic (Paul Cercueil)
>>>
>>>  arch/mips/boot/dts/ingenic/jz4780.dtsi | 5 +++++
>>>  1 file changed, 5 insertions(+)
>>>
>>> diff --git a/arch/mips/boot/dts/ingenic/jz4780.dtsi b/arch/mips/boot/dts/ingenic/jz4780.dtsi
>>> index 20e37d2d6008..76055bbc823a 100644
>>> --- a/arch/mips/boot/dts/ingenic/jz4780.dtsi
>>> +++ b/arch/mips/boot/dts/ingenic/jz4780.dtsi
>>> @@ -263,6 +263,11 @@
>>>                 status = "disabled";
>>>         };
>>>
>>> +       watchdog: watchdog@10002000 {
>>> +               compatible = "ingenic,jz4780-watchdog";
>>
>> In drivers/watchdog/jz4740_wdt.c the compatible is declared as
>> "ingenic,jz4740-watchdog" while your change says
>> "ingenic,jz4780-watchdog". Can you modify that?
>
> Well in the full changeset, you'll find: [PATCH v2 4/5] watchdog:
> jz4740: Add support for the watchdog in jz4780 SoC
>
> https://lkml.org/lkml/2017/9/15/451
>
> There has been some misunderstanding. I still believe I need a new
> compatible string, even if currently the code is 100% identical.

I missed that. Ignore this comment.

>
>>> +               reg = <0x10002000 0x100>;
>>> +       };
>>> +
>>
>> The structures jz4740_wdt_device and jz4740_wdt_resources can be
>> removed form arch/mips/jz4740/platform.c as watchdog is declared in
>> device tree. For JZ4740 platform watchdog is not used so the variables
>> can be removed.
>>
>> Do you mind adding watchdog entry to JZ4740 device tree? Currently
>> watchdog is not enabled for JZ4740 platform.
>
>
> Will do once this series has been accepted. Thanks for the review !

Reviewed-by: PrasannaKumar Muralidharan <prasannatsmkumar@xxxxxxxxx>

>
>>>         nemc: nemc@13410000 {
>>>                 compatible = "ingenic,jz4780-nemc";
>>>                 reg = <0x13410000 0x10000>;
>>> --
>>> 2.11.0
>>>
>>
>> Regards,
>> PrasannaKumar