Re: [PATCH v3] ARC: [plat-hsdk]: Add reset controller node to manage ethernet reset

[Vineet Gupta]

On 09/22/2017 09:49 AM, Eugeniy Paltsev wrote:
> DW ethernet controller on HSDK hangs sometimes after SW reset, so
> add reset node to make possible to reset DW ethernet controller HW.
>
> Signed-off-by: Eugeniy Paltsev <Eugeniy.Paltsev@xxxxxxxxxxxx>
> ---
> Changes v2 -> v3:
>    * Remove v1 suffix as we finaly got rid of v1 suffix in reset
>      driver and docs.
>    * Rename reset node to "reset-controller" for consistency with
>      the other bindings.
>
> Changes v1 -> v2:
>    * Enable HSDK reset driver in hsdk_defconfig
>
>   arch/arc/boot/dts/hsdk.dts      | 9 +++++++++
>   arch/arc/configs/hsdk_defconfig | 1 +
>   2 files changed, 10 insertions(+)
>
> diff --git a/arch/arc/boot/dts/hsdk.dts b/arch/arc/boot/dts/hsdk.dts
> index b922f3f..8adde1b 100644
> --- a/arch/arc/boot/dts/hsdk.dts
> +++ b/arch/arc/boot/dts/hsdk.dts
> @@ -12,6 +12,7 @@
>   /dts-v1/;
>   
>   #include <dt-bindings/net/ti-dp83867.h>
> +#include <dt-bindings/reset/snps,hsdk-reset.h>
>   
>   / {
>   	model = "snps,hsdk";
> @@ -102,6 +103,12 @@
>   
>   		ranges = <0x00000000 0xf0000000 0x10000000>;
>   
> +		cgu_rst: reset-controller@8a0 {
> +			compatible = "snps,hsdk-reset";
> +			#reset-cells = <1>;
> +			reg = <0x8A0 0x4>, <0xFF0 0x4>;
> +		};
> +
>   		core_clk: core-clk@0 {
>   			compatible = "snps,hsdk-core-pll-clock";
>   			reg = <0x00 0x10>, <0x14B8 0x4>;
> @@ -158,6 +165,8 @@
>   			clocks = <&gmacclk>;
>   			clock-names = "stmmaceth";
>   			phy-handle = <&phy0>;
> +			resets = <&cgu_rst HSDK_ETH_RESET>;
> +			reset-names = "stmmaceth";
>   
>   			mdio {
>   				#address-cells = <1>;
> diff --git a/arch/arc/configs/hsdk_defconfig b/arch/arc/configs/hsdk_defconfig
> index 7b8f8fa..15f0f6b 100644
> --- a/arch/arc/configs/hsdk_defconfig
> +++ b/arch/arc/configs/hsdk_defconfig
> @@ -63,6 +63,7 @@ CONFIG_MMC_SDHCI=y
>   CONFIG_MMC_SDHCI_PLTFM=y
>   CONFIG_MMC_DW=y
>   # CONFIG_IOMMU_SUPPORT is not set
> +CONFIG_RESET_HSDK=y

Since we need this feature for our platform, better to just select it in Kconfig.

I can fix it up here if you agree !

-Vineet

>   CONFIG_EXT3_FS=y
>   CONFIG_VFAT_FS=y
>   CONFIG_TMPFS=y