[PATCH 07/13] clk: qcom: support for alpha mode configuration
From: Abhishek Sahu
Date: Thu Sep 28 2017 - 13:53:03 EST
The current configuration does not fully configure PLL alpha mode
and values so this patch
1. Configures PLL_ALPHA_VAL_U for PLL which supports 40 bit alpha.
2. Adds alpha enable and alpha mode configuration support.
Signed-off-by: Abhishek Sahu <absahu@xxxxxxxxxxxxxx>
---
drivers/clk/qcom/clk-alpha-pll.c | 6 ++++++
drivers/clk/qcom/clk-alpha-pll.h | 3 +++
2 files changed, 9 insertions(+)
diff --git a/drivers/clk/qcom/clk-alpha-pll.c b/drivers/clk/qcom/clk-alpha-pll.c
index b33d120..07030d3 100644
--- a/drivers/clk/qcom/clk-alpha-pll.c
+++ b/drivers/clk/qcom/clk-alpha-pll.c
@@ -198,6 +198,10 @@ void clk_alpha_pll_configure(struct clk_alpha_pll *pll, struct regmap *regmap,
regmap_write(regmap, off + pll_cfg_ctl_u(type),
config->config_ctl_hi_val);
+ if (pll_alpha_width(type) > 32)
+ regmap_write(regmap, off + pll_alpha_u(type),
+ config->alpha_hi);
+
val = config->main_output_mask;
val |= config->aux_output_mask;
val |= config->aux2_output_mask;
@@ -205,6 +209,8 @@ void clk_alpha_pll_configure(struct clk_alpha_pll *pll, struct regmap *regmap,
val |= config->pre_div_val;
val |= config->post_div_val;
val |= config->vco_val;
+ val |= config->alpha_en_mask;
+ val |= config->alpha_mode_mask;
mask = config->main_output_mask;
mask |= config->aux_output_mask;
diff --git a/drivers/clk/qcom/clk-alpha-pll.h b/drivers/clk/qcom/clk-alpha-pll.h
index b9caefc..17aa27c 100644
--- a/drivers/clk/qcom/clk-alpha-pll.h
+++ b/drivers/clk/qcom/clk-alpha-pll.h
@@ -67,12 +67,15 @@ struct clk_alpha_pll_postdiv {
struct alpha_pll_config {
u32 l;
u32 alpha;
+ u32 alpha_hi;
u32 config_ctl_val;
u32 config_ctl_hi_val;
u32 main_output_mask;
u32 aux_output_mask;
u32 aux2_output_mask;
u32 early_output_mask;
+ u32 alpha_en_mask;
+ u32 alpha_mode_mask;
u32 pre_div_val;
u32 pre_div_mask;
u32 post_div_val;
--
QUALCOMM INDIA, on behalf of Qualcomm Innovation Center, Inc. is a member of Code Aurora Forum, hosted by The Linux Foundation