Re: [PATCH 2/2] pinctrl: rockchip: Fix the correct routing config for the gmac-m1 pins of rmii and rgmii

[Heiko Stuebner]

Hi David,

Am Samstag, 30. September 2017, 20:13:21 CEST schrieb David Wu:
> If the gmac-m1 optimization(bit10) is selected, the gpio function
> of gmac pins is not valid. We may use the rmii mode for gmac interface,
> the pins such as rx_d2, rx_d3, which the rgmii mode used, but rmii not
> used could be taken as gpio function. So gmac_rxd0m1 selects the bit2,
> and gmac_rxd0m3 select bit10 is more correct.
> 
> Signed-off-by: David Wu <david.wu@xxxxxxxxxxxxxx>

the patch subject should mention the the rk3328 whose routing gets fixed
(like adding a simple "on rk3328" to it), otherwise

Reviewed-by: Heiko Stuebner <heiko@xxxxxxxxx>