Re: [PATCH v2] mmc: core: add driver strength selection when selecting hs400es

From: Ulf Hansson
Date: Mon Oct 02 2017 - 04:31:08 EST


On 26 September 2017 at 02:03, Chanho Min <chanho.min@xxxxxxx> wrote:
> The driver strength selection is missed and required when selecting
> hs400es. So, It is added here.
>
> v2: add stable tag.
>
> Fixes: 81ac2af65793ecf ("mmc: core: implement enhanced strobe support")
> Cc: stable@xxxxxxxxxxxxxxx
> Signed-off-by: Hankyung Yu <hankyung.yu@xxxxxxx>
> Signed-off-by: Chanho Min <chanho.min@xxxxxxx>
> Reviewed-by: Adrian Hunter <adrian.hunter@xxxxxxxxx>

Thanks, applied for fixes - and removed the version history from the changelog!

Kind regards
Uffe

> ---
> drivers/mmc/core/mmc.c | 36 +++++++++++++++++++-----------------
> 1 file changed, 19 insertions(+), 17 deletions(-)
>
> diff --git a/drivers/mmc/core/mmc.c b/drivers/mmc/core/mmc.c
> index a7eb623..36217ad 100644
> --- a/drivers/mmc/core/mmc.c
> +++ b/drivers/mmc/core/mmc.c
> @@ -1286,6 +1286,23 @@ int mmc_hs400_to_hs200(struct mmc_card *card)
> return err;
> }
>
> +static void mmc_select_driver_type(struct mmc_card *card)
> +{
> + int card_drv_type, drive_strength, drv_type;
> +
> + card_drv_type = card->ext_csd.raw_driver_strength |
> + mmc_driver_type_mask(0);
> +
> + drive_strength = mmc_select_drive_strength(card,
> + card->ext_csd.hs200_max_dtr,
> + card_drv_type, &drv_type);
> +
> + card->drive_strength = drive_strength;
> +
> + if (drv_type)
> + mmc_set_driver_type(card->host, drv_type);
> +}
> +
> static int mmc_select_hs400es(struct mmc_card *card)
> {
> struct mmc_host *host = card->host;
> @@ -1341,6 +1358,8 @@ static int mmc_select_hs400es(struct mmc_card *card)
> goto out_err;
> }
>
> + mmc_select_driver_type(card);
> +
> /* Switch card to HS400 */
> val = EXT_CSD_TIMING_HS400 |
> card->drive_strength << EXT_CSD_DRV_STR_SHIFT;
> @@ -1374,23 +1393,6 @@ static int mmc_select_hs400es(struct mmc_card *card)
> return err;
> }
>
> -static void mmc_select_driver_type(struct mmc_card *card)
> -{
> - int card_drv_type, drive_strength, drv_type;
> -
> - card_drv_type = card->ext_csd.raw_driver_strength |
> - mmc_driver_type_mask(0);
> -
> - drive_strength = mmc_select_drive_strength(card,
> - card->ext_csd.hs200_max_dtr,
> - card_drv_type, &drv_type);
> -
> - card->drive_strength = drive_strength;
> -
> - if (drv_type)
> - mmc_set_driver_type(card->host, drv_type);
> -}
> -
> /*
> * For device supporting HS200 mode, the following sequence
> * should be done before executing the tuning process.
> --
> 2.1.4
>