[PATCH v4 25/27] x86_32: assembly, change all ENTRY+END to SYM_CODE_*
From: Jiri Slaby
Date: Mon Oct 02 2017 - 05:13:11 EST
Here, we change all code which is not marked as functions. In other
words, this code has been using END, not ENDPROC. So switch all of this
to appropriate new markings SYM_CODE_START and SYM_CODE_END.
And since we removed the last user of END on X86, make sure, that END is
not defined there.
Signed-off-by: Jiri Slaby <jslaby@xxxxxxx>
Cc: Thomas Gleixner <tglx@xxxxxxxxxxxxx>
Cc: Ingo Molnar <mingo@xxxxxxxxxx>
Cc: "H. Peter Anvin" <hpa@xxxxxxxxx>
Cc: x86@xxxxxxxxxx
---
arch/x86/entry/entry_32.S | 104 ++++++++++++++++++++++----------------------
arch/x86/kernel/ftrace_32.S | 12 ++---
include/linux/linkage.h | 2 +
3 files changed, 60 insertions(+), 58 deletions(-)
diff --git a/arch/x86/entry/entry_32.S b/arch/x86/entry/entry_32.S
index 424636d186ea..c587bf34b93a 100644
--- a/arch/x86/entry/entry_32.S
+++ b/arch/x86/entry/entry_32.S
@@ -223,7 +223,7 @@
* %eax: prev task
* %edx: next task
*/
-ENTRY(__switch_to_asm)
+SYM_CODE_START(__switch_to_asm)
/*
* Save callee-saved registers
* This must match the order in struct inactive_task_frame
@@ -249,7 +249,7 @@ ENTRY(__switch_to_asm)
popl %ebp
jmp __switch_to
-END(__switch_to_asm)
+SYM_CODE_END(__switch_to_asm)
/*
* The unwinder expects the last frame on the stack to always be at the same
@@ -275,7 +275,7 @@ ENDPROC(schedule_tail_wrapper)
* ebx: kernel thread func (NULL for user thread)
* edi: kernel thread arg
*/
-ENTRY(ret_from_fork)
+SYM_CODE_START(ret_from_fork)
call schedule_tail_wrapper
testl %ebx, %ebx
@@ -297,7 +297,7 @@ ENTRY(ret_from_fork)
*/
movl $0, PT_EAX(%esp)
jmp 2b
-END(ret_from_fork)
+SYM_CODE_END(ret_from_fork)
/*
* Return to user mode is not as complex as all this looks,
@@ -333,7 +333,7 @@ SYM_CODE_INNER_LABEL(resume_userspace, SYM_V_LOCAL)
SYM_CODE_END(ret_from_exception)
#ifdef CONFIG_PREEMPT
-ENTRY(resume_kernel)
+SYM_CODE_START(resume_kernel)
DISABLE_INTERRUPTS(CLBR_ANY)
.Lneed_resched:
cmpl $0, PER_CPU_VAR(__preempt_count)
@@ -342,7 +342,7 @@ ENTRY(resume_kernel)
jz restore_all
call preempt_schedule_irq
jmp .Lneed_resched
-END(resume_kernel)
+SYM_CODE_END(resume_kernel)
#endif
SYM_ENTRY(__begin_SYSENTER_singlestep_region, SYM_V_GLOBAL, SYM_A_NONE)
@@ -636,7 +636,7 @@ ENDPROC(entry_INT80_32)
* We pack 1 stub into every 8-byte block.
*/
.align 8
-ENTRY(irq_entries_start)
+SYM_CODE_START(irq_entries_start)
vector=FIRST_EXTERNAL_VECTOR
.rept (FIRST_SYSTEM_VECTOR - FIRST_EXTERNAL_VECTOR)
pushl $(~vector+0x80) /* Note: always in signed byte range */
@@ -644,7 +644,7 @@ ENTRY(irq_entries_start)
jmp common_interrupt
.align 8
.endr
-END(irq_entries_start)
+SYM_CODE_END(irq_entries_start)
/*
* the CPU automatically disables interrupts when executing an IRQ vector,
@@ -680,14 +680,14 @@ ENDPROC(name)
/* The include is where all of the SMP etc. interrupts come from */
#include <asm/entry_arch.h>
-ENTRY(coprocessor_error)
+SYM_CODE_START(coprocessor_error)
ASM_CLAC
pushl $0
pushl $do_coprocessor_error
jmp common_exception
-END(coprocessor_error)
+SYM_CODE_END(coprocessor_error)
-ENTRY(simd_coprocessor_error)
+SYM_CODE_START(simd_coprocessor_error)
ASM_CLAC
pushl $0
#ifdef CONFIG_X86_INVD_BUG
@@ -699,96 +699,96 @@ ENTRY(simd_coprocessor_error)
pushl $do_simd_coprocessor_error
#endif
jmp common_exception
-END(simd_coprocessor_error)
+SYM_CODE_END(simd_coprocessor_error)
-ENTRY(device_not_available)
+SYM_CODE_START(device_not_available)
ASM_CLAC
pushl $-1 # mark this as an int
pushl $do_device_not_available
jmp common_exception
-END(device_not_available)
+SYM_CODE_END(device_not_available)
#ifdef CONFIG_PARAVIRT
-ENTRY(native_iret)
+SYM_CODE_START(native_iret)
iret
_ASM_EXTABLE(native_iret, iret_exc)
-END(native_iret)
+SYM_CODE_END(native_iret)
#endif
-ENTRY(overflow)
+SYM_CODE_START(overflow)
ASM_CLAC
pushl $0
pushl $do_overflow
jmp common_exception
-END(overflow)
+SYM_CODE_END(overflow)
-ENTRY(bounds)
+SYM_CODE_START(bounds)
ASM_CLAC
pushl $0
pushl $do_bounds
jmp common_exception
-END(bounds)
+SYM_CODE_END(bounds)
-ENTRY(invalid_op)
+SYM_CODE_START(invalid_op)
ASM_CLAC
pushl $0
pushl $do_invalid_op
jmp common_exception
-END(invalid_op)
+SYM_CODE_END(invalid_op)
-ENTRY(coprocessor_segment_overrun)
+SYM_CODE_START(coprocessor_segment_overrun)
ASM_CLAC
pushl $0
pushl $do_coprocessor_segment_overrun
jmp common_exception
-END(coprocessor_segment_overrun)
+SYM_CODE_END(coprocessor_segment_overrun)
-ENTRY(invalid_TSS)
+SYM_CODE_START(invalid_TSS)
ASM_CLAC
pushl $do_invalid_TSS
jmp common_exception
-END(invalid_TSS)
+SYM_CODE_END(invalid_TSS)
-ENTRY(segment_not_present)
+SYM_CODE_START(segment_not_present)
ASM_CLAC
pushl $do_segment_not_present
jmp common_exception
-END(segment_not_present)
+SYM_CODE_END(segment_not_present)
-ENTRY(stack_segment)
+SYM_CODE_START(stack_segment)
ASM_CLAC
pushl $do_stack_segment
jmp common_exception
-END(stack_segment)
+SYM_CODE_END(stack_segment)
-ENTRY(alignment_check)
+SYM_CODE_START(alignment_check)
ASM_CLAC
pushl $do_alignment_check
jmp common_exception
-END(alignment_check)
+SYM_CODE_END(alignment_check)
-ENTRY(divide_error)
+SYM_CODE_START(divide_error)
ASM_CLAC
pushl $0 # no error code
pushl $do_divide_error
jmp common_exception
-END(divide_error)
+SYM_CODE_END(divide_error)
#ifdef CONFIG_X86_MCE
-ENTRY(machine_check)
+SYM_CODE_START(machine_check)
ASM_CLAC
pushl $0
pushl machine_check_vector
jmp common_exception
-END(machine_check)
+SYM_CODE_END(machine_check)
#endif
-ENTRY(spurious_interrupt_bug)
+SYM_CODE_START(spurious_interrupt_bug)
ASM_CLAC
pushl $0
pushl $do_spurious_interrupt_bug
jmp common_exception
-END(spurious_interrupt_bug)
+SYM_CODE_END(spurious_interrupt_bug)
#ifdef CONFIG_XEN
ENTRY(xen_hypervisor_callback)
@@ -884,12 +884,12 @@ BUILD_INTERRUPT3(hyperv_callback_vector, HYPERVISOR_CALLBACK_VECTOR,
#endif /* CONFIG_HYPERV */
-ENTRY(page_fault)
+SYM_CODE_START(page_fault)
ASM_CLAC
pushl $do_page_fault
ALIGN
jmp common_exception
-END(page_fault)
+SYM_CODE_END(page_fault)
SYM_CODE_START_LOCAL_NOALIGN(common_exception)
/* the function address is in %gs's slot on the stack */
@@ -923,7 +923,7 @@ SYM_CODE_START_LOCAL_NOALIGN(common_exception)
jmp ret_from_exception
SYM_CODE_END(common_exception)
-ENTRY(debug)
+SYM_CODE_START(debug)
/*
* #DB can happen at the first instruction of
* entry_SYSENTER_32 or in Xen's SYSENTER prologue. If this
@@ -958,7 +958,7 @@ ENTRY(debug)
call do_debug
movl %ebx, %esp
jmp ret_from_exception
-END(debug)
+SYM_CODE_END(debug)
/*
* NMI is doubly nasty. It can happen on the first instruction of
@@ -967,7 +967,7 @@ END(debug)
* switched stacks. We handle both conditions by simply checking whether we
* interrupted kernel code running on the SYSENTER stack.
*/
-ENTRY(nmi)
+SYM_CODE_START(nmi)
ASM_CLAC
#ifdef CONFIG_X86_ESPFIX32
pushl %eax
@@ -1026,9 +1026,9 @@ ENTRY(nmi)
lss 12+4(%esp), %esp # back to espfix stack
jmp .Lirq_return
#endif
-END(nmi)
+SYM_CODE_END(nmi)
-ENTRY(int3)
+SYM_CODE_START(int3)
ASM_CLAC
pushl $-1 # mark this as an int
SAVE_ALL
@@ -1038,22 +1038,22 @@ ENTRY(int3)
movl %esp, %eax # pt_regs pointer
call do_int3
jmp ret_from_exception
-END(int3)
+SYM_CODE_END(int3)
-ENTRY(general_protection)
+SYM_CODE_START(general_protection)
pushl $do_general_protection
jmp common_exception
-END(general_protection)
+SYM_CODE_END(general_protection)
#ifdef CONFIG_KVM_GUEST
-ENTRY(async_page_fault)
+SYM_CODE_START(async_page_fault)
ASM_CLAC
pushl $do_async_page_fault
jmp common_exception
-END(async_page_fault)
+SYM_CODE_END(async_page_fault)
#endif
-ENTRY(rewind_stack_do_exit)
+SYM_CODE_START(rewind_stack_do_exit)
/* Prevent any naive code from trying to unwind to our caller. */
xorl %ebp, %ebp
@@ -1062,4 +1062,4 @@ ENTRY(rewind_stack_do_exit)
call do_exit
1: jmp 1b
-END(rewind_stack_do_exit)
+SYM_CODE_END(rewind_stack_do_exit)
diff --git a/arch/x86/kernel/ftrace_32.S b/arch/x86/kernel/ftrace_32.S
index dfab7dc29b8d..efe209b292f8 100644
--- a/arch/x86/kernel/ftrace_32.S
+++ b/arch/x86/kernel/ftrace_32.S
@@ -33,7 +33,7 @@ SYM_FUNC_START(function_hook)
ret
SYM_FUNC_END(function_hook)
-ENTRY(ftrace_caller)
+SYM_CODE_START(ftrace_caller)
#ifdef USING_FRAME_POINTER
# ifdef CC_USING_FENTRY
@@ -98,7 +98,7 @@ ftrace_graph_call:
/* This is weak to keep gas from relaxing the jumps */
WEAK(ftrace_stub)
ret
-END(ftrace_caller)
+SYM_CODE_END(ftrace_caller)
SYM_CODE_START(ftrace_regs_caller)
/*
@@ -171,7 +171,7 @@ SYM_CODE_INNER_LABEL_NOALIGN(ftrace_regs_call, SYM_V_GLOBAL)
SYM_CODE_END(ftrace_regs_caller)
#else /* ! CONFIG_DYNAMIC_FTRACE */
-ENTRY(function_hook)
+SYM_CODE_START(function_hook)
cmpl $__PAGE_OFFSET, %esp
jb ftrace_stub /* Paging not enabled yet? */
@@ -203,11 +203,11 @@ ftrace_stub:
popl %ecx
popl %eax
jmp ftrace_stub
-END(function_hook)
+SYM_CODE_END(function_hook)
#endif /* CONFIG_DYNAMIC_FTRACE */
#ifdef CONFIG_FUNCTION_GRAPH_TRACER
-ENTRY(ftrace_graph_caller)
+SYM_CODE_START(ftrace_graph_caller)
pushl %eax
pushl %ecx
pushl %edx
@@ -226,7 +226,7 @@ ENTRY(ftrace_graph_caller)
popl %ecx
popl %eax
ret
-END(ftrace_graph_caller)
+SYM_CODE_END(ftrace_graph_caller)
.globl return_to_handler
return_to_handler:
diff --git a/include/linux/linkage.h b/include/linux/linkage.h
index e64aa9fd24bb..42762a45aab5 100644
--- a/include/linux/linkage.h
+++ b/include/linux/linkage.h
@@ -119,11 +119,13 @@
SYM_FUNC_START_WEAK_NOALIGN(name)
#endif
+#ifndef CONFIG_X86
#ifndef END
/* deprecated, use SYM_FUNC_END, SYM_DATA_END, or SYM_END */
#define END(name) \
.size name, .-name
#endif
+#endif /* CONFIG_X86 */
#ifndef CONFIG_X86_64
/* If symbol 'name' is treated as a subroutine (gets called, and returns)
--
2.14.2