Re: usb/sound/bcd2000: warning in bcd2000_init_device

[Takashi Iwai]

On Tue, 03 Oct 2017 19:42:21 +0200,
Greg Kroah-Hartman wrote:
> 
> On Tue, Oct 03, 2017 at 12:50:08PM -0400, Alan Stern wrote:
> > On Tue, 3 Oct 2017, Takashi Iwai wrote:
> > 
> > > > It's a dev_WARN because it indicates a potentially serious error in the 
> > > > driver: The driver has submitted an interrupt URB to a bulk endpoint.  
> > > > That may not sound bad, but the same check gets triggered if a driver 
> > > > submits a bulk URB to an isochronous endpoint, or any other invalid 
> > > > combination.
> > > > 
> > > > Most likely the explanation here is that the driver doesn't bother to
> > > > check the endpoint type because it expects the endpoint will always be
> > > > interrupt.  But that is not a safe strategy.  USB devices and their
> > > > firmware should not be trusted unnecessarily.
> > > > 
> > > > The best fix is, like you said, to add a sanity check in the caller.
> > > 
> > > OK, but then do we have some handy helper for the check?
> > > As other bug reports by syzkaller suggest, there are a few other
> > > drivers that do the same, submitting a urb with naive assumption of
> > > the fixed EP for specific devices.  In the end we'll need to put the
> > > very same checks there in multiple places.
> > 
> > Perhaps we could add a helper routine that would take a list of 
> > expected endpoint types and check that the actual endpoints match the 
> > types.  But of course, all the drivers you're talking about would have 
> > to add a call to this helper routine.
> 
> We have almost this type of function, usb_find_common_endpoints(),
> what's wrong with using that?  Johan has already swept the tree and
> added a lot of these checks, odds are no one looked at the sound/
> subdir...

Well, what I had in my mind is just a snippet from usb_submit_urb(),
something like:

bool usb_sanity_check_urb_pipe(struct urb *urb)
{
	struct usb_host_endpoint *ep;
	int xfertype;
	static const int pipetypes[4] = {
		PIPE_CONTROL, PIPE_ISOCHRONOUS, PIPE_BULK, PIPE_INTERRUPT
	};

	ep = usb_pipe_endpoint(urb->dev, urb->pipe);
	xfertype = usb_endpoint_type(&ep->desc);
	return usb_pipetype(urb->pipe) != pipetypes[xfertype];
}

And calling this before usb_submit_urb() in each place that assigns
the fixed EP as device-specific quirks.
Does it make sense?


thanks,

Takashi