[PATCH v2 9/9] ARM: dts: aspeed: Clean up UART nodes
From: Joel Stanley
Date: Wed Oct 04 2017 - 02:51:03 EST
- Shorten size of reg property so it covers only the implemented
registers
- Add VUART compatible, and change node name to serial@
- Remove outdated current-speed property. Different bootloaders use
different speeds, so this is no longer helpful
Signed-off-by: Joel Stanley <joel@xxxxxxxxx>
---
v2:
- move node reordering to seperate patch
- fix vuart node name
- actually remove current-speed from g4
---
arch/arm/boot/dts/aspeed-g4.dtsi | 18 +++++++++---------
arch/arm/boot/dts/aspeed-g5.dtsi | 18 +++++++++---------
2 files changed, 18 insertions(+), 18 deletions(-)
diff --git a/arch/arm/boot/dts/aspeed-g4.dtsi b/arch/arm/boot/dts/aspeed-g4.dtsi
index 4125e07f22f9..e455bd236798 100644
--- a/arch/arm/boot/dts/aspeed-g4.dtsi
+++ b/arch/arm/boot/dts/aspeed-g4.dtsi
@@ -27,6 +27,7 @@
serial2 = &uart3;
serial3 = &uart4;
serial4 = &uart5;
+ serial5 = &vuart;
};
cpus {
@@ -185,7 +186,7 @@
uart1: serial@1e783000 {
compatible = "ns16550a";
- reg = <0x1e783000 0x1000>;
+ reg = <0x1e783000 0x20>;
reg-shift = <2>;
interrupts = <9>;
clocks = <&clk_uart>;
@@ -195,11 +196,10 @@
uart5: serial@1e784000 {
compatible = "ns16550a";
- reg = <0x1e784000 0x1000>;
+ reg = <0x1e784000 0x20>;
reg-shift = <2>;
interrupts = <10>;
clocks = <&clk_uart>;
- current-speed = <38400>;
no-loopback-test;
status = "disabled";
};
@@ -218,9 +218,9 @@
status = "disabled";
};
- uart6: serial@1e787000 {
- compatible = "ns16550a";
- reg = <0x1e787000 0x1000>;
+ vuart: serial@1e787000 {
+ compatible = "aspeed,ast2400-vuart";
+ reg = <0x1e787000 0x40>;
reg-shift = <2>;
interrupts = <10>;
clocks = <&clk_uart>;
@@ -230,7 +230,7 @@
uart2: serial@1e78d000 {
compatible = "ns16550a";
- reg = <0x1e78d000 0x1000>;
+ reg = <0x1e78d000 0x20>;
reg-shift = <2>;
interrupts = <32>;
clocks = <&clk_uart>;
@@ -240,7 +240,7 @@
uart3: serial@1e78e000 {
compatible = "ns16550a";
- reg = <0x1e78e000 0x1000>;
+ reg = <0x1e78e000 0x20>;
reg-shift = <2>;
interrupts = <33>;
clocks = <&clk_uart>;
@@ -250,7 +250,7 @@
uart4: serial@1e78f000 {
compatible = "ns16550a";
- reg = <0x1e78f000 0x1000>;
+ reg = <0x1e78f000 0x20>;
reg-shift = <2>;
interrupts = <34>;
clocks = <&clk_uart>;
diff --git a/arch/arm/boot/dts/aspeed-g5.dtsi b/arch/arm/boot/dts/aspeed-g5.dtsi
index 61cc2d25143a..cef51dcc1002 100644
--- a/arch/arm/boot/dts/aspeed-g5.dtsi
+++ b/arch/arm/boot/dts/aspeed-g5.dtsi
@@ -27,6 +27,7 @@
serial2 = &uart3;
serial3 = &uart4;
serial4 = &uart5;
+ serial5 = &vuart;
};
cpus {
@@ -229,7 +230,7 @@
uart1: serial@1e783000 {
compatible = "ns16550a";
- reg = <0x1e783000 0x1000>;
+ reg = <0x1e783000 0x20>;
reg-shift = <2>;
interrupts = <9>;
clocks = <&clk_uart>;
@@ -239,11 +240,10 @@
uart5: serial@1e784000 {
compatible = "ns16550a";
- reg = <0x1e784000 0x1000>;
+ reg = <0x1e784000 0x20>;
reg-shift = <2>;
interrupts = <10>;
clocks = <&clk_uart>;
- current-speed = <38400>;
no-loopback-test;
status = "disabled";
};
@@ -297,9 +297,9 @@
};
};
- uart6: serial@1e787000 {
- compatible = "ns16550a";
- reg = <0x1e787000 0x1000>;
+ vuart: vuart@1e787000 {
+ compatible = "aspeed,ast2500-vuart";
+ reg = <0x1e787000 0x40>;
reg-shift = <2>;
interrupts = <10>;
clocks = <&clk_uart>;
@@ -309,7 +309,7 @@
uart2: serial@1e78d000 {
compatible = "ns16550a";
- reg = <0x1e78d000 0x1000>;
+ reg = <0x1e78d000 0x20>;
reg-shift = <2>;
interrupts = <32>;
clocks = <&clk_uart>;
@@ -319,7 +319,7 @@
uart3: serial@1e78e000 {
compatible = "ns16550a";
- reg = <0x1e78e000 0x1000>;
+ reg = <0x1e78e000 0x20>;
reg-shift = <2>;
interrupts = <33>;
clocks = <&clk_uart>;
@@ -329,7 +329,7 @@
uart4: serial@1e78f000 {
compatible = "ns16550a";
- reg = <0x1e78f000 0x1000>;
+ reg = <0x1e78f000 0x20>;
reg-shift = <2>;
interrupts = <34>;
clocks = <&clk_uart>;
--
2.14.1