[PATCH v2] serial: imx: Correct comment imx_flush_buffer()

From: Martyn Welch
Date: Wed Oct 04 2017 - 12:13:45 EST


The comment in imx_flush_buffer() states that the state of 4 registers
are to be saved/restored, then only saves and restores 3 registers. The
missing register (UBRC) is read only and thus can't be restored.

Update the comment to reflect reality.

Signed-off-by: Martyn Welch <martyn.welch@xxxxxxxxxxxxxxx>
---

v2: Remove trailing whitespace.

drivers/tty/serial/imx.c | 8 ++++++--
1 file changed, 6 insertions(+), 2 deletions(-)

diff --git a/drivers/tty/serial/imx.c b/drivers/tty/serial/imx.c
index b697c1e..76818a2 100644
--- a/drivers/tty/serial/imx.c
+++ b/drivers/tty/serial/imx.c
@@ -1417,10 +1417,14 @@ static void imx_flush_buffer(struct uart_port *port)

/*
* According to the Reference Manual description of the UART SRST bit:
+ *
* "Reset the transmit and receive state machines,
* all FIFOs and register USR1, USR2, UBIR, UBMR, UBRC, URXD, UTXD
- * and UTS[6-3]". As we don't need to restore the old values from
- * USR1, USR2, URXD, UTXD, only save/restore the other four registers
+ * and UTS[6-3]".
+ *
+ * We don't need to restore the old values from USR1, USR2, URXD and
+ * UTXD. UBRC is read only, so only save/restore the other three
+ * registers.
*/
ubir = readl(sport->port.membase + UBIR);
ubmr = readl(sport->port.membase + UBMR);
--
1.8.3.1