[PATCH 18/20] ARM: dts: sun9i: cubieboard4: Remove card detect pull-up

From: Maxime Ripard
Date: Thu Oct 05 2017 - 06:51:49 EST


The board has an external pull-up on the card-detect signal, so there's no
need to add another one.

This also removes a DTC warning.

Signed-off-by: Maxime Ripard <maxime.ripard@xxxxxxxxxxxxxxxxxx>
---
arch/arm/boot/dts/sun9i-a80-cubieboard4.dts | 10 +---------
1 file changed, 1 insertion(+), 9 deletions(-)

diff --git a/arch/arm/boot/dts/sun9i-a80-cubieboard4.dts b/arch/arm/boot/dts/sun9i-a80-cubieboard4.dts
index 15cc82350360..cb337e08adab 100644
--- a/arch/arm/boot/dts/sun9i-a80-cubieboard4.dts
+++ b/arch/arm/boot/dts/sun9i-a80-cubieboard4.dts
@@ -85,7 +85,7 @@

&mmc0 {
pinctrl-names = "default";
- pinctrl-0 = <&mmc0_pins>, <&mmc0_cd_pin_cubieboard4>;
+ pinctrl-0 = <&mmc0_pins>;
vmmc-supply = <&reg_dcdc1>;
bus-width = <4>;
cd-gpios = <&pio 7 18 GPIO_ACTIVE_HIGH>; /* PH18 */
@@ -128,14 +128,6 @@
clocks = <&ac100_rtc 0>;
};

-&pio {
- mmc0_cd_pin_cubieboard4: mmc0_cd_pin@0 {
- pins = "PH18";
- function = "gpio_in";
- bias-pull-up;
- };
-};
-
&r_ir {
status = "okay";
};
--
git-series 0.9.1