[PATCH v4 0/3] KVM: LAPIC: Rework lapic timer to behave more like real-hardware
From: Wanpeng Li
Date: Thu Oct 05 2017 - 09:55:45 EST
The issue is reported in xen community.
Anthony PERARD pointed out:
| When developing PVH for OVMF, I've used the lapic timer. It turns out that the
| way it is used by OVMF did not work with Xen . I tried to find out how
| real-hw behave, and write a XTF tests . And this patch series tries to fix
| the behavior of the vlapic timer.
| The OVMF driver for the APIC timer initialize the timer like this:
| write to TMICT (initial counter)
| write to TMDCR (divide configuration)
| enable the timer (this may change timer mode from one-shot to periodic)
| It turns out that TMICT is set to 0 on the last step, but OVMF expect the timer
| to run.
| Here is some description of the APIC timer, base on observation as well as read
| of the Intel SDM. The description is also patch of patch description
| Maybe a way of thinking how the APIC timer is evaluated, is to think of how
| hardward will do it. There is a counter TMCCT which always keeps counting down.
| Setting TMICT also set TMCCT, nothing else matter.
| Setting LVTT does not change anything right away.
| Setting TMDCR does not change much.
| Now TMCCT keeps counting down, by a value related to TMDCR.
| Once, TMCCT reach 0, it is only at this time that LVTT is taken into account.
| Is there an interrupt to deliver? Should the timer restart counting from the
| value in TMICT?
| In the Intel SDM, there is the word "disarm" of the timer used. I guess the
| easier way to disarm the APIC timer (when in periodic or one-shot) is to set
| TMICT to 0. But if we take TSC-Deadline mode out of the picture, there is
| nothing in the manual that say that the timer is disarm or stopped when
| changing timer mode (there is only two modes left, period and one-shot).
| As for the TSC-deadline timer mode, observation shown that changing to it (or
| from it) does reset and disarm both timers, so effectively TMICT and the
| tscdeadline are set to 0.
|  https://lists.xenproject.org/archives/html/xen-devel/2016-12/msg00959.html
|  v1:
| v2: look for "[XTF PATCH V2 0/3] Testing vlapic timer"
v3 -> v4:
* don't need to start_apic_timer() when write LVTT
v2 -> v3:
* move the write 0 to APIC_TMICT logic to apic_update_lvtt()
* skip hrtimer_cancel() in apic_update_lvtt() when either from one-shot mode to
periodic or vice versa.
v1 -> v2:
* add cover-letter and collect recent lapic patches to one patchset
Wanpeng Li (3):
KVM: LAPIC: Fix lapic timer mode transition
KVM: LAPIC: Keep timer running when switching between one-shot and periodic mode
KVM: LAPIC: Apply change to TDCR right away to the timer
arch/x86/include/asm/apicdef.h | 1 +
arch/x86/kvm/lapic.c | 34 ++++++++++++++++++++++++----------
2 files changed, 25 insertions(+), 10 deletions(-)