[PATCH net v2 6/9] net/sonic: Cleanup and modernize log messages
From: Finn Thain
Date: Thu Oct 05 2017 - 21:13:10 EST
Add missing printk severity levels.
Don't print the valid silicon revision number (it's in the source).
Avoid KERN_CONT usage as per advice from checkpatch.
Avoid ifdef around printk calls.
Cc: Thomas Bogendoerfer <tsbogend@xxxxxxxxxxxxxxxx>
Cc: Chris Zankel <chris@xxxxxxxxxx>
Signed-off-by: Finn Thain <fthain@xxxxxxxxxxxxxxxxxxx>
---
Only the macsonic.c changes have been tested. The other changes
are similar but untested.
---
drivers/net/ethernet/natsemi/jazzsonic.c | 9 +++------
drivers/net/ethernet/natsemi/macsonic.c | 24 ++++++++++--------------
drivers/net/ethernet/natsemi/xtsonic.c | 11 ++++-------
3 files changed, 17 insertions(+), 27 deletions(-)
diff --git a/drivers/net/ethernet/natsemi/jazzsonic.c b/drivers/net/ethernet/natsemi/jazzsonic.c
index a6caeb567c0d..6ec25c27cb73 100644
--- a/drivers/net/ethernet/natsemi/jazzsonic.c
+++ b/drivers/net/ethernet/natsemi/jazzsonic.c
@@ -132,17 +132,14 @@ static int sonic_probe1(struct net_device *dev)
* the expected location.
*/
silicon_revision = SONIC_READ(SONIC_SR);
- if (sonic_debug > 1)
- printk("SONIC Silicon Revision = 0x%04x\n",silicon_revision);
-
i = 0;
while (known_revisions[i] != 0xffff &&
known_revisions[i] != silicon_revision)
i++;
if (known_revisions[i] == 0xffff) {
- printk("SONIC ethernet controller not found (0x%4x)\n",
- silicon_revision);
+ pr_info("SONIC ethernet controller not found (0x%4x)\n",
+ silicon_revision);
goto out;
}
@@ -248,7 +245,7 @@ static int jazz_sonic_probe(struct platform_device *pdev)
if (err)
goto out1;
- printk("%s: MAC %pM IRQ %d\n", dev->name, dev->dev_addr, dev->irq);
+ netdev_info(dev, "MAC %pM, IRQ %d\n", dev->dev_addr, dev->irq);
return 0;
diff --git a/drivers/net/ethernet/natsemi/macsonic.c b/drivers/net/ethernet/natsemi/macsonic.c
index 3ca6ae7caf55..795d71522617 100644
--- a/drivers/net/ethernet/natsemi/macsonic.c
+++ b/drivers/net/ethernet/natsemi/macsonic.c
@@ -315,8 +315,6 @@ static int mac_onboard_sonic_probe(struct net_device *dev)
if (!MACH_IS_MAC)
return -ENODEV;
- printk(KERN_INFO "Checking for internal Macintosh ethernet (SONIC).. ");
-
/* Bogus probing, on the models which may or may not have
Ethernet (BTW, the Ethernet *is* always at the same
address, and nothing else lives there, at least if Apple's
@@ -329,14 +327,12 @@ static int mac_onboard_sonic_probe(struct net_device *dev)
card_present = hwreg_present((void*)ONBOARD_SONIC_REGISTERS);
if (!card_present) {
- printk("none.\n");
+ pr_info("No onboard or comm-slot SONIC was detected\n");
return -ENODEV;
}
commslot = 1;
}
- printk("yes\n");
-
/* Danger! My arms are flailing wildly! You *must* set lp->reg_offset
* and dev->base_addr before using SONIC_READ() or SONIC_WRITE() */
dev->base_addr = ONBOARD_SONIC_REGISTERS;
@@ -385,10 +381,10 @@ static int mac_onboard_sonic_probe(struct net_device *dev)
"%s: revision 0x%04x, using %d bit DMA and register offset %d\n",
dev_name(lp->device), sr, lp->dma_bitmode?32:16, lp->reg_offset);
-#if 0 /* This is sometimes useful to find out how MacOS configured the card. */
- printk(KERN_INFO "%s: DCR: 0x%04x, DCR2: 0x%04x\n", dev_name(lp->device),
- SONIC_READ(SONIC_DCR) & 0xffff, SONIC_READ(SONIC_DCR2) & 0xffff);
-#endif
+ /* This is sometimes useful to find out how MacOS configured the card */
+ pr_debug("%s: DCR=0x%04x, DCR2=0x%04x\n", __func__,
+ SONIC_READ(SONIC_DCR) & 0xffff,
+ SONIC_READ(SONIC_DCR2) & 0xffff);
/* Software reset, then initialize control registers. */
SONIC_WRITE(SONIC_CMD, SONIC_CR_RST);
@@ -540,10 +536,10 @@ static int mac_nubus_sonic_probe(struct net_device *dev)
printk(KERN_INFO "%s: revision 0x%04x, using %d bit DMA and register offset %d\n",
dev_name(lp->device), SONIC_READ(SONIC_SR), dma_bitmode?32:16, reg_offset);
-#if 0 /* This is sometimes useful to find out how MacOS configured the card. */
- printk(KERN_INFO "%s: DCR: 0x%04x, DCR2: 0x%04x\n", dev_name(lp->device),
- SONIC_READ(SONIC_DCR) & 0xffff, SONIC_READ(SONIC_DCR2) & 0xffff);
-#endif
+ /* This is sometimes useful to find out how MacOS configured the card */
+ pr_debug("%s: DCR=0x%04x, DCR2=0x%04x\n", __func__,
+ SONIC_READ(SONIC_DCR) & 0xffff,
+ SONIC_READ(SONIC_DCR2) & 0xffff);
/* Software reset, then initialize control registers. */
SONIC_WRITE(SONIC_CMD, SONIC_CR_RST);
@@ -594,7 +590,7 @@ static int mac_sonic_probe(struct platform_device *pdev)
if (err)
goto out;
- printk("%s: MAC %pM IRQ %d\n", dev->name, dev->dev_addr, dev->irq);
+ netdev_info(dev, "MAC %pM, IRQ %d\n", dev->dev_addr, dev->irq);
return 0;
diff --git a/drivers/net/ethernet/natsemi/xtsonic.c b/drivers/net/ethernet/natsemi/xtsonic.c
index 9ee0f69a83c0..bed89e8105e9 100644
--- a/drivers/net/ethernet/natsemi/xtsonic.c
+++ b/drivers/net/ethernet/natsemi/xtsonic.c
@@ -145,17 +145,14 @@ static int __init sonic_probe1(struct net_device *dev)
* the expected location.
*/
silicon_revision = SONIC_READ(SONIC_SR);
- if (sonic_debug > 1)
- printk("SONIC Silicon Revision = 0x%04x\n",silicon_revision);
-
i = 0;
while ((known_revisions[i] != 0xffff) &&
(known_revisions[i] != silicon_revision))
i++;
if (known_revisions[i] == 0xffff) {
- printk("SONIC ethernet controller not found (0x%4x)\n",
- silicon_revision);
+ pr_info("SONIC ethernet controller not found (0x%4x)\n",
+ silicon_revision);
return -ENODEV;
}
@@ -275,8 +272,8 @@ int xtsonic_probe(struct platform_device *pdev)
if ((err = register_netdev(dev)))
goto out1;
- printk("%s: SONIC ethernet @%08lx, MAC %pM, IRQ %d\n", dev->name,
- dev->base_addr, dev->dev_addr, dev->irq);
+ netdev_info(dev, "SONIC ethernet @%08lx, MAC %pM, IRQ %d\n",
+ dev->base_addr, dev->dev_addr, dev->irq);
return 0;
--
2.13.5