[PATCH v5 00/13] mmc: mediatek: add support of mt2701/mt2712
From: Chaotian Jing
Date: Tue Oct 10 2017 - 22:41:51 EST
This serial of patches are adding support of mt2701/mt2712.
there are many changes and HW improvement between mt8173 and
mt2701/mt2712, below is a list of these changes:
1. enlarge CLKDIV bits from 8 to 12
2. remove the PAD_TUNE register and add a new PAD_TUNE0 register
3. add data sync and async fifo feature
4. add busy_check feature
5. add stop_clk fix
6. add enhance_rx support
7. add a seperate CG of source clock
mt2712 supports full of these features, mt2701 supports part of it, and
add a "mediatek,latch-ck" to work-around as it do not support stop-clk fix.
Note: As Pinctrl/CCF are not ready now, so that current patches do not
include DTS part.
Changed vs v4:
based on Julien's comment, change the "bool pad_tune0" to "u32 pad_tune_reg".
Changed vs v3:
based on Ulf's comments, make the bindings change to be the first patch.
Changed vs v2:
based on Matthias's comments, merge binding file changes to one patch,
add "hs400_tune" flag in dev_comp.
Changed vs v1:
based on Ulf/Rob/Matthias's comments of DTS binding file, make the binding
file clearly and fix probe issue.
Chaotian Jing (12):
mmc: dt-bindings: Add reg/source_cg/latch-ck for Mediatek MMC bindings
mmc: mediatek: add support of mt2701/mt2712
arm64: dts: mt8173: remove "mediatek,mt8135-mmc" from mmc nodes
mmc: mediatek: make hs400_tune_response only for mt8173
mmc: mediatek: add pad_tune0 support
mmc: mediatek: add async fifo and data tune support
mmc: mediatek: add busy_check support
mmc: mediatek: add stop_clk fix and enhance_rx support
mmc: mediatek: add support of source_cg clock
mmc: mediatek: add latch-ck support
mmc: mediatek: improve eMMC hs400 mode read performance
mmc: mediatek: perfer to use rise edge latching for cmd line
Documentation/devicetree/bindings/mmc/mtk-sd.txt | 16 +-
arch/arm64/boot/dts/mediatek/mt8173.dtsi | 12 +-
drivers/mmc/host/mtk-sd.c | 283 ++++++++++++++++++++---
3 files changed, 263 insertions(+), 48 deletions(-)
--
1.8.1.1.dirty