[PATCH v3 1/2] pinctrl: meson: separate soc drivers
From: Jerome Brunet
Date: Thu Oct 12 2017 - 08:41:07 EST
When meson pinctrl is enabled, all meson platforms pinctrl drivers are
built in the kernel, with a significant amount of data.
This leads to situation where pinctrl drivers targeting an architecture
are also compiled and shipped on another one (ex: meson8 - ARM - compiled
and shipped on ARM64 builds). This is a waste of memory we can easily
avoid.
This change makes 4 pinctrl drivers (1 per SoC) out the original single
driver, allowing to compile and ship only the ones required.
Reviewed-by: Neil Armstrong <narmstrong@xxxxxxxxxxxx>
Reviewed-by: Kevin Hilman <khilman@xxxxxxxxxxxx>
Signed-off-by: Jerome Brunet <jbrunet@xxxxxxxxxxxx>
---
drivers/pinctrl/Kconfig | 11 +-----
drivers/pinctrl/meson/Kconfig | 34 +++++++++++++++++++
drivers/pinctrl/meson/Makefile | 8 +++--
drivers/pinctrl/meson/pinctrl-meson-gxbb.c | 25 ++++++++++++--
drivers/pinctrl/meson/pinctrl-meson-gxl.c | 25 ++++++++++++--
drivers/pinctrl/meson/pinctrl-meson.c | 54 +++---------------------------
drivers/pinctrl/meson/pinctrl-meson.h | 11 ++----
drivers/pinctrl/meson/pinctrl-meson8.c | 25 ++++++++++++--
drivers/pinctrl/meson/pinctrl-meson8b.c | 25 ++++++++++++--
9 files changed, 139 insertions(+), 79 deletions(-)
create mode 100644 drivers/pinctrl/meson/Kconfig
diff --git a/drivers/pinctrl/Kconfig b/drivers/pinctrl/Kconfig
index 034822c7144d..c0294958405d 100644
--- a/drivers/pinctrl/Kconfig
+++ b/drivers/pinctrl/Kconfig
@@ -167,16 +167,6 @@ config PINCTRL_MCP23S08
This provides a GPIO interface supporting inputs and outputs.
The I2C versions of the chips can be used as interrupt-controller.
-config PINCTRL_MESON
- bool
- depends on OF
- select PINMUX
- select PINCONF
- select GENERIC_PINCONF
- select GPIOLIB
- select OF_GPIO
- select REGMAP_MMIO
-
config PINCTRL_OXNAS
bool
depends on OF
@@ -369,6 +359,7 @@ source "drivers/pinctrl/uniphier/Kconfig"
source "drivers/pinctrl/vt8500/Kconfig"
source "drivers/pinctrl/mediatek/Kconfig"
source "drivers/pinctrl/zte/Kconfig"
+source "drivers/pinctrl/meson/Kconfig"
config PINCTRL_XWAY
bool
diff --git a/drivers/pinctrl/meson/Kconfig b/drivers/pinctrl/meson/Kconfig
new file mode 100644
index 000000000000..2795a31eb04a
--- /dev/null
+++ b/drivers/pinctrl/meson/Kconfig
@@ -0,0 +1,34 @@
+menuconfig PINCTRL_MESON
+ bool "Amlogic SoC pinctrl drivers"
+ depends on ARCH_MESON
+ depends on OF
+ select PINMUX
+ select PINCONF
+ select GENERIC_PINCONF
+ select GPIOLIB
+ select OF_GPIO
+ select REGMAP_MMIO
+
+if PINCTRL_MESON
+
+config PINCTRL_MESON8
+ bool "Meson 8 SoC pinctrl driver"
+ depends on ARM
+ default y
+
+config PINCTRL_MESON8B
+ bool "Meson 8b SoC pinctrl driver"
+ depends on ARM
+ default y
+
+config PINCTRL_MESON_GXBB
+ bool "Meson gxbb SoC pinctrl driver"
+ depends on ARM64
+ default y
+
+config PINCTRL_MESON_GXL
+ bool "Meson gxl SoC pinctrl driver"
+ depends on ARM64
+ default y
+
+endif
diff --git a/drivers/pinctrl/meson/Makefile b/drivers/pinctrl/meson/Makefile
index 27c5b5126008..dc3b73f8039a 100644
--- a/drivers/pinctrl/meson/Makefile
+++ b/drivers/pinctrl/meson/Makefile
@@ -1,3 +1,5 @@
-obj-y += pinctrl-meson8.o pinctrl-meson8b.o
-obj-y += pinctrl-meson-gxbb.o pinctrl-meson-gxl.o
-obj-y += pinctrl-meson.o
+obj-$(CONFIG_PINCTRL_MESON) += pinctrl-meson.o
+obj-$(CONFIG_PINCTRL_MESON8) += pinctrl-meson8.o
+obj-$(CONFIG_PINCTRL_MESON8B) += pinctrl-meson8b.o
+obj-$(CONFIG_PINCTRL_MESON_GXBB) += pinctrl-meson-gxbb.o
+obj-$(CONFIG_PINCTRL_MESON_GXL) += pinctrl-meson-gxl.o
diff --git a/drivers/pinctrl/meson/pinctrl-meson-gxbb.c b/drivers/pinctrl/meson/pinctrl-meson-gxbb.c
index 1881d4a0eca2..a87bdb17414b 100644
--- a/drivers/pinctrl/meson/pinctrl-meson-gxbb.c
+++ b/drivers/pinctrl/meson/pinctrl-meson-gxbb.c
@@ -824,7 +824,7 @@ static struct meson_bank meson_gxbb_aobus_banks[] = {
BANK("AO", GPIOAO_0, GPIOAO_13, 0, 13, 0, 0, 0, 16, 0, 0, 0, 16, 1, 0),
};
-struct meson_pinctrl_data meson_gxbb_periphs_pinctrl_data = {
+static struct meson_pinctrl_data meson_gxbb_periphs_pinctrl_data = {
.name = "periphs-banks",
.pins = meson_gxbb_periphs_pins,
.groups = meson_gxbb_periphs_groups,
@@ -836,7 +836,7 @@ struct meson_pinctrl_data meson_gxbb_periphs_pinctrl_data = {
.num_banks = ARRAY_SIZE(meson_gxbb_periphs_banks),
};
-struct meson_pinctrl_data meson_gxbb_aobus_pinctrl_data = {
+static struct meson_pinctrl_data meson_gxbb_aobus_pinctrl_data = {
.name = "aobus-banks",
.pins = meson_gxbb_aobus_pins,
.groups = meson_gxbb_aobus_groups,
@@ -847,3 +847,24 @@ struct meson_pinctrl_data meson_gxbb_aobus_pinctrl_data = {
.num_funcs = ARRAY_SIZE(meson_gxbb_aobus_functions),
.num_banks = ARRAY_SIZE(meson_gxbb_aobus_banks),
};
+
+static const struct of_device_id meson_gxbb_pinctrl_dt_match[] = {
+ {
+ .compatible = "amlogic,meson-gxbb-periphs-pinctrl",
+ .data = &meson_gxbb_periphs_pinctrl_data,
+ },
+ {
+ .compatible = "amlogic,meson-gxbb-aobus-pinctrl",
+ .data = &meson_gxbb_aobus_pinctrl_data,
+ },
+ { },
+};
+
+static struct platform_driver meson_gxbb_pinctrl_driver = {
+ .probe = meson_pinctrl_probe,
+ .driver = {
+ .name = "meson-gxbb-pinctrl",
+ .of_match_table = meson_gxbb_pinctrl_dt_match,
+ },
+};
+builtin_platform_driver(meson_gxbb_pinctrl_driver);
diff --git a/drivers/pinctrl/meson/pinctrl-meson-gxl.c b/drivers/pinctrl/meson/pinctrl-meson-gxl.c
index 3a14ecae9f31..088ac94f76b0 100644
--- a/drivers/pinctrl/meson/pinctrl-meson-gxl.c
+++ b/drivers/pinctrl/meson/pinctrl-meson-gxl.c
@@ -809,7 +809,7 @@ static struct meson_bank meson_gxl_aobus_banks[] = {
BANK("AO", GPIOAO_0, GPIOAO_9, 0, 9, 0, 0, 0, 16, 0, 0, 0, 16, 1, 0),
};
-struct meson_pinctrl_data meson_gxl_periphs_pinctrl_data = {
+static struct meson_pinctrl_data meson_gxl_periphs_pinctrl_data = {
.name = "periphs-banks",
.pins = meson_gxl_periphs_pins,
.groups = meson_gxl_periphs_groups,
@@ -821,7 +821,7 @@ struct meson_pinctrl_data meson_gxl_periphs_pinctrl_data = {
.num_banks = ARRAY_SIZE(meson_gxl_periphs_banks),
};
-struct meson_pinctrl_data meson_gxl_aobus_pinctrl_data = {
+static struct meson_pinctrl_data meson_gxl_aobus_pinctrl_data = {
.name = "aobus-banks",
.pins = meson_gxl_aobus_pins,
.groups = meson_gxl_aobus_groups,
@@ -832,3 +832,24 @@ struct meson_pinctrl_data meson_gxl_aobus_pinctrl_data = {
.num_funcs = ARRAY_SIZE(meson_gxl_aobus_functions),
.num_banks = ARRAY_SIZE(meson_gxl_aobus_banks),
};
+
+static const struct of_device_id meson_gxl_pinctrl_dt_match[] = {
+ {
+ .compatible = "amlogic,meson-gxl-periphs-pinctrl",
+ .data = &meson_gxl_periphs_pinctrl_data,
+ },
+ {
+ .compatible = "amlogic,meson-gxl-aobus-pinctrl",
+ .data = &meson_gxl_aobus_pinctrl_data,
+ },
+ { },
+};
+
+static struct platform_driver meson_gxl_pinctrl_driver = {
+ .probe = meson_pinctrl_probe,
+ .driver = {
+ .name = "meson-gxl-pinctrl",
+ .of_match_table = meson_gxl_pinctrl_dt_match,
+ },
+};
+builtin_platform_driver(meson_gxl_pinctrl_driver);
diff --git a/drivers/pinctrl/meson/pinctrl-meson.c b/drivers/pinctrl/meson/pinctrl-meson.c
index 71bccb7acbf8..525e8b17d471 100644
--- a/drivers/pinctrl/meson/pinctrl-meson.c
+++ b/drivers/pinctrl/meson/pinctrl-meson.c
@@ -50,6 +50,7 @@
#include <linux/io.h>
#include <linux/of.h>
#include <linux/of_address.h>
+#include <linux/of_device.h>
#include <linux/pinctrl/pinconf-generic.h>
#include <linux/pinctrl/pinconf.h>
#include <linux/pinctrl/pinctrl.h>
@@ -481,42 +482,6 @@ static int meson_gpio_get(struct gpio_chip *chip, unsigned gpio)
return !!(val & BIT(bit));
}
-static const struct of_device_id meson_pinctrl_dt_match[] = {
- {
- .compatible = "amlogic,meson8-cbus-pinctrl",
- .data = &meson8_cbus_pinctrl_data,
- },
- {
- .compatible = "amlogic,meson8b-cbus-pinctrl",
- .data = &meson8b_cbus_pinctrl_data,
- },
- {
- .compatible = "amlogic,meson8-aobus-pinctrl",
- .data = &meson8_aobus_pinctrl_data,
- },
- {
- .compatible = "amlogic,meson8b-aobus-pinctrl",
- .data = &meson8b_aobus_pinctrl_data,
- },
- {
- .compatible = "amlogic,meson-gxbb-periphs-pinctrl",
- .data = &meson_gxbb_periphs_pinctrl_data,
- },
- {
- .compatible = "amlogic,meson-gxbb-aobus-pinctrl",
- .data = &meson_gxbb_aobus_pinctrl_data,
- },
- {
- .compatible = "amlogic,meson-gxl-periphs-pinctrl",
- .data = &meson_gxl_periphs_pinctrl_data,
- },
- {
- .compatible = "amlogic,meson-gxl-aobus-pinctrl",
- .data = &meson_gxl_aobus_pinctrl_data,
- },
- { },
-};
-
static int meson_gpiolib_register(struct meson_pinctrl *pc)
{
int ret;
@@ -624,9 +589,8 @@ static int meson_pinctrl_parse_dt(struct meson_pinctrl *pc,
return 0;
}
-static int meson_pinctrl_probe(struct platform_device *pdev)
+int meson_pinctrl_probe(struct platform_device *pdev)
{
- const struct of_device_id *match;
struct device *dev = &pdev->dev;
struct meson_pinctrl *pc;
int ret;
@@ -636,10 +600,9 @@ static int meson_pinctrl_probe(struct platform_device *pdev)
return -ENOMEM;
pc->dev = dev;
- match = of_match_node(meson_pinctrl_dt_match, pdev->dev.of_node);
- pc->data = (struct meson_pinctrl_data *) match->data;
+ pc->data = (struct meson_pinctrl_data *) of_device_get_match_data(dev);
- ret = meson_pinctrl_parse_dt(pc, pdev->dev.of_node);
+ ret = meson_pinctrl_parse_dt(pc, dev->of_node);
if (ret)
return ret;
@@ -659,12 +622,3 @@ static int meson_pinctrl_probe(struct platform_device *pdev)
return meson_gpiolib_register(pc);
}
-
-static struct platform_driver meson_pinctrl_driver = {
- .probe = meson_pinctrl_probe,
- .driver = {
- .name = "meson-pinctrl",
- .of_match_table = meson_pinctrl_dt_match,
- },
-};
-builtin_platform_driver(meson_pinctrl_driver);
diff --git a/drivers/pinctrl/meson/pinctrl-meson.h b/drivers/pinctrl/meson/pinctrl-meson.h
index 7ed0a80fd9dc..284157d43612 100644
--- a/drivers/pinctrl/meson/pinctrl-meson.h
+++ b/drivers/pinctrl/meson/pinctrl-meson.h
@@ -13,6 +13,7 @@
#include <linux/gpio.h>
#include <linux/pinctrl/pinctrl.h>
+#include <linux/platform_device.h>
#include <linux/regmap.h>
#include <linux/types.h>
@@ -165,11 +166,5 @@ struct meson_pinctrl {
#define MESON_PIN(x) PINCTRL_PIN(x, #x)
-extern struct meson_pinctrl_data meson8_cbus_pinctrl_data;
-extern struct meson_pinctrl_data meson8_aobus_pinctrl_data;
-extern struct meson_pinctrl_data meson8b_cbus_pinctrl_data;
-extern struct meson_pinctrl_data meson8b_aobus_pinctrl_data;
-extern struct meson_pinctrl_data meson_gxbb_periphs_pinctrl_data;
-extern struct meson_pinctrl_data meson_gxbb_aobus_pinctrl_data;
-extern struct meson_pinctrl_data meson_gxl_periphs_pinctrl_data;
-extern struct meson_pinctrl_data meson_gxl_aobus_pinctrl_data;
+/* Common probe function */
+int meson_pinctrl_probe(struct platform_device *pdev);
diff --git a/drivers/pinctrl/meson/pinctrl-meson8.c b/drivers/pinctrl/meson/pinctrl-meson8.c
index fbf8ecd1c2b6..68b345fc105a 100644
--- a/drivers/pinctrl/meson/pinctrl-meson8.c
+++ b/drivers/pinctrl/meson/pinctrl-meson8.c
@@ -1044,7 +1044,7 @@ static struct meson_bank meson8_aobus_banks[] = {
BANK("AO", GPIOAO_0, GPIO_TEST_N, 0, 13, 0, 0, 0, 16, 0, 0, 0, 16, 1, 0),
};
-struct meson_pinctrl_data meson8_cbus_pinctrl_data = {
+static struct meson_pinctrl_data meson8_cbus_pinctrl_data = {
.name = "cbus-banks",
.pins = meson8_cbus_pins,
.groups = meson8_cbus_groups,
@@ -1056,7 +1056,7 @@ struct meson_pinctrl_data meson8_cbus_pinctrl_data = {
.num_banks = ARRAY_SIZE(meson8_cbus_banks),
};
-struct meson_pinctrl_data meson8_aobus_pinctrl_data = {
+static struct meson_pinctrl_data meson8_aobus_pinctrl_data = {
.name = "ao-bank",
.pins = meson8_aobus_pins,
.groups = meson8_aobus_groups,
@@ -1067,3 +1067,24 @@ struct meson_pinctrl_data meson8_aobus_pinctrl_data = {
.num_funcs = ARRAY_SIZE(meson8_aobus_functions),
.num_banks = ARRAY_SIZE(meson8_aobus_banks),
};
+
+static const struct of_device_id meson8_pinctrl_dt_match[] = {
+ {
+ .compatible = "amlogic,meson8-cbus-pinctrl",
+ .data = &meson8_cbus_pinctrl_data,
+ },
+ {
+ .compatible = "amlogic,meson8-aobus-pinctrl",
+ .data = &meson8_aobus_pinctrl_data,
+ },
+ { },
+};
+
+static struct platform_driver meson8_pinctrl_driver = {
+ .probe = meson_pinctrl_probe,
+ .driver = {
+ .name = "meson8-pinctrl",
+ .of_match_table = meson8_pinctrl_dt_match,
+ },
+};
+builtin_platform_driver(meson8_pinctrl_driver);
diff --git a/drivers/pinctrl/meson/pinctrl-meson8b.c b/drivers/pinctrl/meson/pinctrl-meson8b.c
index 7af296db48c8..4d61df09bc3f 100644
--- a/drivers/pinctrl/meson/pinctrl-meson8b.c
+++ b/drivers/pinctrl/meson/pinctrl-meson8b.c
@@ -904,7 +904,7 @@ static struct meson_bank meson8b_aobus_banks[] = {
BANK("AO", GPIOAO_0, GPIO_TEST_N, 0, 13, 0, 0, 0, 16, 0, 0, 0, 16, 1, 0),
};
-struct meson_pinctrl_data meson8b_cbus_pinctrl_data = {
+static struct meson_pinctrl_data meson8b_cbus_pinctrl_data = {
.name = "cbus-banks",
.pins = meson8b_cbus_pins,
.groups = meson8b_cbus_groups,
@@ -916,7 +916,7 @@ struct meson_pinctrl_data meson8b_cbus_pinctrl_data = {
.num_banks = ARRAY_SIZE(meson8b_cbus_banks),
};
-struct meson_pinctrl_data meson8b_aobus_pinctrl_data = {
+static struct meson_pinctrl_data meson8b_aobus_pinctrl_data = {
.name = "aobus-banks",
.pins = meson8b_aobus_pins,
.groups = meson8b_aobus_groups,
@@ -927,3 +927,24 @@ struct meson_pinctrl_data meson8b_aobus_pinctrl_data = {
.num_funcs = ARRAY_SIZE(meson8b_aobus_functions),
.num_banks = ARRAY_SIZE(meson8b_aobus_banks),
};
+
+static const struct of_device_id meson8b_pinctrl_dt_match[] = {
+ {
+ .compatible = "amlogic,meson8b-cbus-pinctrl",
+ .data = &meson8b_cbus_pinctrl_data,
+ },
+ {
+ .compatible = "amlogic,meson8b-aobus-pinctrl",
+ .data = &meson8b_aobus_pinctrl_data,
+ },
+ { },
+};
+
+static struct platform_driver meson8b_pinctrl_driver = {
+ .probe = meson_pinctrl_probe,
+ .driver = {
+ .name = "meson8b-pinctrl",
+ .of_match_table = meson8b_pinctrl_dt_match,
+ },
+};
+builtin_platform_driver(meson8b_pinctrl_driver);
--
2.13.6