[PATCH v2 07/13] usb: mtu3: add support for usb3.1 IP

From: Chunfeng Yun
Date: Fri Oct 13 2017 - 05:11:20 EST


Support SuperSpeedPlus for usb3.1 device IP

Signed-off-by: Chunfeng Yun <chunfeng.yun@xxxxxxxxxxxx>
---
drivers/usb/mtu3/mtu3.h | 1 +
drivers/usb/mtu3/mtu3_core.c | 14 +++++++++++---
drivers/usb/mtu3/mtu3_gadget.c | 3 ++-
drivers/usb/mtu3/mtu3_gadget_ep0.c | 16 ++++++++--------
drivers/usb/mtu3/mtu3_hw_regs.h | 1 +
5 files changed, 23 insertions(+), 12 deletions(-)

diff --git a/drivers/usb/mtu3/mtu3.h b/drivers/usb/mtu3/mtu3.h
index b0c2b5d..d80e4e8 100644
--- a/drivers/usb/mtu3/mtu3.h
+++ b/drivers/usb/mtu3/mtu3.h
@@ -94,6 +94,7 @@ enum mtu3_speed {
MTU3_SPEED_FULL = 1,
MTU3_SPEED_HIGH = 3,
MTU3_SPEED_SUPER = 4,
+ MTU3_SPEED_SUPER_PLUS = 5,
};

/**
diff --git a/drivers/usb/mtu3/mtu3_core.c b/drivers/usb/mtu3/mtu3_core.c
index cd4528f..67f7a30 100644
--- a/drivers/usb/mtu3/mtu3_core.c
+++ b/drivers/usb/mtu3/mtu3_core.c
@@ -237,7 +237,7 @@ void mtu3_ep_stall_set(struct mtu3_ep *mep, bool set)

void mtu3_dev_on_off(struct mtu3 *mtu, int is_on)
{
- if (mtu->is_u3_ip && (mtu->max_speed == USB_SPEED_SUPER))
+ if (mtu->is_u3_ip && mtu->max_speed >= USB_SPEED_SUPER)
mtu3_ss_func_set(mtu, is_on);
else
mtu3_hs_softconn_set(mtu, is_on);
@@ -547,6 +547,9 @@ static void mtu3_set_speed(struct mtu3 *mtu)
mtu3_clrbits(mbase, U3D_USB3_CONFIG, USB3_EN);
/* HS/FS detected by HW */
mtu3_setbits(mbase, U3D_POWER_MANAGEMENT, HS_ENABLE);
+ } else if (mtu->max_speed == USB_SPEED_SUPER) {
+ mtu3_clrbits(mtu->ippc_base, SSUSB_U3_CTRL(0),
+ SSUSB_U3_PORT_SSP_SPEED);
}

dev_info(mtu->dev, "max_speed: %s\n",
@@ -624,6 +627,10 @@ static irqreturn_t mtu3_link_isr(struct mtu3 *mtu)
udev_speed = USB_SPEED_SUPER;
maxpkt = 512;
break;
+ case MTU3_SPEED_SUPER_PLUS:
+ udev_speed = USB_SPEED_SUPER_PLUS;
+ maxpkt = 512;
+ break;
default:
udev_speed = USB_SPEED_UNKNOWN;
break;
@@ -825,14 +832,15 @@ int ssusb_gadget_init(struct ssusb_mtk *ssusb)
case USB_SPEED_FULL:
case USB_SPEED_HIGH:
case USB_SPEED_SUPER:
+ case USB_SPEED_SUPER_PLUS:
break;
default:
dev_err(dev, "invalid max_speed: %s\n",
usb_speed_string(mtu->max_speed));
/* fall through */
case USB_SPEED_UNKNOWN:
- /* default as SS */
- mtu->max_speed = USB_SPEED_SUPER;
+ /* default as SSP */
+ mtu->max_speed = USB_SPEED_SUPER_PLUS;
break;
}

diff --git a/drivers/usb/mtu3/mtu3_gadget.c b/drivers/usb/mtu3/mtu3_gadget.c
index 434fca5..b495471 100644
--- a/drivers/usb/mtu3/mtu3_gadget.c
+++ b/drivers/usb/mtu3/mtu3_gadget.c
@@ -89,6 +89,7 @@ static int mtu3_ep_enable(struct mtu3_ep *mep)

switch (mtu->g.speed) {
case USB_SPEED_SUPER:
+ case USB_SPEED_SUPER_PLUS:
if (usb_endpoint_xfer_int(desc) ||
usb_endpoint_xfer_isoc(desc)) {
interval = desc->bInterval;
@@ -456,7 +457,7 @@ static int mtu3_gadget_wakeup(struct usb_gadget *gadget)
return -EOPNOTSUPP;

spin_lock_irqsave(&mtu->lock, flags);
- if (mtu->g.speed == USB_SPEED_SUPER) {
+ if (mtu->g.speed >= USB_SPEED_SUPER) {
mtu3_setbits(mtu->mac_base, U3D_LINK_POWER_CONTROL, UX_EXIT);
} else {
mtu3_setbits(mtu->mac_base, U3D_POWER_MANAGEMENT, RESUME);
diff --git a/drivers/usb/mtu3/mtu3_gadget_ep0.c b/drivers/usb/mtu3/mtu3_gadget_ep0.c
index 958d74d..020b253 100644
--- a/drivers/usb/mtu3/mtu3_gadget_ep0.c
+++ b/drivers/usb/mtu3/mtu3_gadget_ep0.c
@@ -212,8 +212,8 @@ static int ep0_set_sel(struct mtu3 *mtu, struct usb_ctrlrequest *setup)
case USB_RECIP_DEVICE:
result[0] = mtu->is_self_powered << USB_DEVICE_SELF_POWERED;
result[0] |= mtu->may_wakeup << USB_DEVICE_REMOTE_WAKEUP;
- /* superspeed only */
- if (mtu->g.speed == USB_SPEED_SUPER) {
+
+ if (mtu->g.speed >= USB_SPEED_SUPER) {
result[0] |= mtu->u1_enable << USB_DEV_STAT_U1_ENABLED;
result[0] |= mtu->u2_enable << USB_DEV_STAT_U2_ENABLED;
}
@@ -329,8 +329,8 @@ static int ep0_handle_feature_dev(struct mtu3 *mtu,
handled = handle_test_mode(mtu, setup);
break;
case USB_DEVICE_U1_ENABLE:
- if (mtu->g.speed != USB_SPEED_SUPER ||
- mtu->g.state != USB_STATE_CONFIGURED)
+ if (mtu->g.speed < USB_SPEED_SUPER ||
+ mtu->g.state != USB_STATE_CONFIGURED)
break;

lpc = mtu3_readl(mbase, U3D_LINK_POWER_CONTROL);
@@ -344,8 +344,8 @@ static int ep0_handle_feature_dev(struct mtu3 *mtu,
handled = 1;
break;
case USB_DEVICE_U2_ENABLE:
- if (mtu->g.speed != USB_SPEED_SUPER ||
- mtu->g.state != USB_STATE_CONFIGURED)
+ if (mtu->g.speed < USB_SPEED_SUPER ||
+ mtu->g.state != USB_STATE_CONFIGURED)
break;

lpc = mtu3_readl(mbase, U3D_LINK_POWER_CONTROL);
@@ -384,8 +384,8 @@ static int ep0_handle_feature(struct mtu3 *mtu,
break;
case USB_RECIP_INTERFACE:
/* superspeed only */
- if ((value == USB_INTRF_FUNC_SUSPEND)
- && (mtu->g.speed == USB_SPEED_SUPER)) {
+ if (value == USB_INTRF_FUNC_SUSPEND &&
+ mtu->g.speed >= USB_SPEED_SUPER) {
/*
* forward the request because function drivers
* should handle it
diff --git a/drivers/usb/mtu3/mtu3_hw_regs.h b/drivers/usb/mtu3/mtu3_hw_regs.h
index a7e35f6..6953436 100644
--- a/drivers/usb/mtu3/mtu3_hw_regs.h
+++ b/drivers/usb/mtu3/mtu3_hw_regs.h
@@ -467,6 +467,7 @@
#define SSUSB_VBUS_CHG_INT_B_EN BIT(6)

/* U3D_SSUSB_U3_CTRL_0P */
+#define SSUSB_U3_PORT_SSP_SPEED BIT(9)
#define SSUSB_U3_PORT_HOST_SEL BIT(2)
#define SSUSB_U3_PORT_PDN BIT(1)
#define SSUSB_U3_PORT_DIS BIT(0)
--
1.7.9.5