Re: [PATCH] mtd: spi-nor: Add support for Winbond w25q16dw

[Neil Armstrong]

On 28/08/2017 15:11, Neil Armstrong wrote:
> Add JEDEC entry for the Winbond w25q16fw/w25q16dw with similar
> flags and format than the Winbond w25q32dw entry.
> 
> Tested on a Khadas VIM2 SBC board with an Amlogic S912 SoC.
> 
> Signed-off-by: Neil Armstrong <narmstrong@xxxxxxxxxxxx>
> ---
>  drivers/mtd/spi-nor/spi-nor.c | 5 +++++
>  1 file changed, 5 insertions(+)
> 
> diff --git a/drivers/mtd/spi-nor/spi-nor.c b/drivers/mtd/spi-nor/spi-nor.c
> index cf1d4a1..2f74583 100644
> --- a/drivers/mtd/spi-nor/spi-nor.c
> +++ b/drivers/mtd/spi-nor/spi-nor.c
> @@ -1137,6 +1137,11 @@ static int spi_nor_is_locked(struct mtd_info *mtd, loff_t ofs, uint64_t len)
>  	{ "w25x40", INFO(0xef3013, 0, 64 * 1024,  8,  SECT_4K) },
>  	{ "w25x80", INFO(0xef3014, 0, 64 * 1024,  16, SECT_4K) },
>  	{ "w25x16", INFO(0xef3015, 0, 64 * 1024,  32, SECT_4K) },
> +	{
> +		"w25q16dw", INFO(0xef6015, 0, 64 * 1024,  32,
> +			SECT_4K | SPI_NOR_DUAL_READ | SPI_NOR_QUAD_READ |
> +			SPI_NOR_HAS_LOCK | SPI_NOR_HAS_TB)
> +	},
>  	{ "w25x32", INFO(0xef3016, 0, 64 * 1024,  64, SECT_4K) },
>  	{ "w25q20cl", INFO(0xef4012, 0, 64 * 1024,  4, SECT_4K) },
>  	{ "w25q20bw", INFO(0xef5012, 0, 64 * 1024,  4, SECT_4K) },
> 

Hi Cyrille,

Did you had time to review this patch ?

Thanks,
Neil