[PATCH v4 4/4] tpm: use tpm_msleep() value as max delay

[Nayna Jain]

Currently, tpm_msleep() uses delay_msec as the minimum value in
usleep_range. However, that is the maximum time we want to wait.
The function is modified to use the delay_msec as the maximum
value, not the minimum value.

After this change, performance on a TPM 1.2 with an 8 byte
burstcount for 1000 extends improved from ~9sec to ~8sec.

Fixes: 3b9af007869("tpm: replace msleep() with usleep_range() in TPM 1.2/
2.0 generic drivers")

Signed-off-by: Nayna Jain <nayna@xxxxxxxxxxxxxxxxxx>
Acked-by: Mimi Zohar <zohar@xxxxxxxxxxxxxxxxxx>
Tested-by: Jarkko Sakkinen <jarkko.sakkinen@xxxxxxxxxxxxxxx>
Reviewed-by: Jarkko Sakkinen <jarkko.sakkinen@xxxxxxxxxxxxxxx>
---
 drivers/char/tpm/tpm.h | 4 ++--
 1 file changed, 2 insertions(+), 2 deletions(-)

diff --git a/drivers/char/tpm/tpm.h b/drivers/char/tpm/tpm.h
index 4fc83ac7abeb..644de70de2cc 100644
--- a/drivers/char/tpm/tpm.h
+++ b/drivers/char/tpm/tpm.h
@@ -528,8 +528,8 @@ int tpm_pm_resume(struct device *dev);
 
 static inline void tpm_msleep(unsigned int delay_msec)
 {
-	usleep_range(delay_msec * 1000,
-		     (delay_msec * 1000) + TPM_TIMEOUT_RANGE_US);
+	usleep_range((delay_msec * 1000) - TPM_TIMEOUT_RANGE_US,
+		     delay_msec * 1000);
 };
 
 struct tpm_chip *tpm_chip_find_get(int chip_num);
-- 
2.13.3