Re: [PATCH/RFC 4/5] regulator: bd9571mwv: Add support for backup mode

[Geert Uytterhoeven]

Hi Mark,

On Wed, Oct 18, 2017 at 1:02 PM, Mark Brown <broonie@xxxxxxxxxx> wrote:
> On Tue, Oct 10, 2017 at 05:26:17PM +0200, Geert Uytterhoeven wrote:
>> Backup mode is not enabled automatically, as e.g. on Renesas
>> Salvator-X(S) boards enabling backup mode changes the role of the ACC
>> switch from a power switch to a wake-up switch.  Hence enabling it
>> prevents the board from being powered off using the ACC switch, which
>> may confuse the user.
>
> This sounds an awful lot like the standard power/wakeup, though the
> power change is a bit unexpected there.  I'm also wondering if it makes
> sense to just only enable the wakeup mode when suspending which
> preserves the power off functionality while also keeping the wakeup
> support.

The ACC switch is not a momentary switch (push button), but a toggle
switch with two positions.
Hence you cannot enable wakeup mode while suspending, as the proper
system suspend/resume procedure is:
  1. Enable backup mode in the PMIC,
  2. Switch ACC off (no-op as backup mode has been enabled),
  3. Suspend to RAM (PSCI suspend) => system suspends,
  4. Switch ACC on => system wakes up.
If you would combine steps 1 and 3, you can no longer do step 2 in between.

Yes, it's complicated :-(

Gr{oetje,eeting}s,

                        Geert

--
Geert Uytterhoeven -- There's lots of Linux beyond ia32 -- geert@xxxxxxxxxxxxxx

In personal conversations with technical people, I call myself a hacker. But
when I'm talking to journalists I just say "programmer" or something like that.
                                -- Linus Torvalds