Re: [Patch 4/6] dt-bindings: media: ti-vpe: Document VPE driver

[Benoit Parrot]

Rob Herring <robh@xxxxxxxxxx> wrote on Tue [2017-Oct-17 16:00:51 -0500]:
> On Thu, Oct 12, 2017 at 02:27:17PM -0500, Benoit Parrot wrote:
> > Device Tree bindings for the Video Processing Engine (VPE) driver.
> > 
> > Signed-off-by: Benoit Parrot <bparrot@xxxxxx>
> > ---
> >  Documentation/devicetree/bindings/media/ti-vpe.txt | 41 ++++++++++++++++++++++
> >  1 file changed, 41 insertions(+)
> >  create mode 100644 Documentation/devicetree/bindings/media/ti-vpe.txt
> > 
> > diff --git a/Documentation/devicetree/bindings/media/ti-vpe.txt b/Documentation/devicetree/bindings/media/ti-vpe.txt
> > new file mode 100644
> > index 000000000000..c2ef93d08417
> > --- /dev/null
> > +++ b/Documentation/devicetree/bindings/media/ti-vpe.txt
> > @@ -0,0 +1,41 @@
> > +Texas Instruments DRA7x VIDEO PROCESSING ENGINE (VPE)
> > +------------------------------------------------------
> > +
> > +The Video Processing Engine (VPE) is a key component for image post
> > +processing applications. VPE consist of a single memory to memory
> > +path which can perform chroma up/down sampling, deinterlacing,
> > +scaling and color space conversion.
> > +
> > +Required properties:
> > +- compatible: must be "ti,vpe"
> 
> Needs SoC specific compatibles.

This particular I/P is present on all DRA7x family of devices
so would "ti,dra7-vpe" be acceptable?

> 
> > +- reg:	physical base address and length of the registers set for the 8
> > +	memory regions required;
> > +- reg-names: name associated with the memory regions described is <reg>;
> > +- interrupts: should contain IRQ line for VPE;
> > +
> > +Example:
> > +	vpe {
> > +		compatible = "ti,vpe";
> > +		ti,hwmods = "vpe";
> > +		clocks = <&dpll_core_h23x2_ck>;
> > +		clock-names = "fck";
> > +		reg =	<0x489d0000 0x120>,
> > +			<0x489d0300 0x20>,
> > +			<0x489d0400 0x20>,
> > +			<0x489d0500 0x20>,
> > +			<0x489d0600 0x3c>,
> > +			<0x489d0700 0x80>,
> 
> Is there other stuff between these regions?

No, they listed separately because each sub-region/module is
individually mapped and accessed using a starting 0 offset.

> 
> > +			<0x489d5700 0x18>,
> > +			<0x489dd000 0x400>;
> > +		reg-names =	"vpe_top",
> > +				"vpe_chr_us0",
> > +				"vpe_chr_us1",
> > +				"vpe_chr_us2",
> > +				"vpe_dei",
> > +				"sc",
> > +				"csc",
> > +				"vpdma";
> > +		interrupts = <GIC_SPI 354 IRQ_TYPE_LEVEL_HIGH>;
> 
> > +		#address-cells = <1>;
> > +		#size-cells = <0>;
> 
> These aren't needed.

OK, I'll remove those.

Benoit

> 
> > +	};
> > -- 
> > 2.9.0
> >