Re: [PATCH v2 2/2] extcon: add optional debounce-timeout-ms attribute

[Chanwoo Choi]

Hi,

On 2017ë 10ì 19ì 12:26, Raveendra Padasalagi wrote:
> Add changes to capture optional dt attribute "debounce-timeout-ms"
> provided in extcon node and used the same value if provided otherwise
> default value of 20ms is used for id and vbus gpios debounce time.
> 
> Signed-off-by: Raveendra Padasalagi <raveendra.padasalagi@xxxxxxxxxxxx>
> Reviewed-by: Ray Jui <ray.jui@xxxxxxxxxxxx>
> Reviewed-by: Srinath Mannam <srinath.mannam@xxxxxxxxxxxx>
> ---
> 
> Changes in v2:
>  Rename gpio_debounce_timeout_ms to debounce_usecs
> 
>  drivers/extcon/extcon-usb-gpio.c | 12 +++++++++---
>  1 file changed, 9 insertions(+), 3 deletions(-)
> 
> diff --git a/drivers/extcon/extcon-usb-gpio.c b/drivers/extcon/extcon-usb-gpio.c
> index 9c925b0..76ef1da 100644
> --- a/drivers/extcon/extcon-usb-gpio.c
> +++ b/drivers/extcon/extcon-usb-gpio.c
> @@ -41,6 +41,7 @@ struct usb_extcon_info {
>  
>  	unsigned long debounce_jiffies;
>  	struct delayed_work wq_detcable;
> +	unsigned int debounce_usecs;
>  };
>  
>  static const unsigned int usb_extcon_cable[] = {
> @@ -133,6 +134,11 @@ static int usb_extcon_probe(struct platform_device *pdev)
>  	if (IS_ERR(info->vbus_gpiod))
>  		return PTR_ERR(info->vbus_gpiod);
>  
> +	ret = of_property_read_u32(np, "input-debounce",
> +			     &info->debounce_usecs);
> +	if (ret)
> +		info->debounce_usecs = USB_GPIO_DEBOUNCE_MS;

The USB_GPIO_DEBOUNCE_MS indicates 20 millisecond.
You need to redefine it as following:
	-#define USB_GPIO_DEBOUNCE_MS   20      /* ms */
	+#define USB_GPIO_DEBOUNCE_USEC 20000

	info->debounce_usecs = USB_GPIO_DEBOUNCE_USEC;

or
	info->debounce_usecs = USB_GPIO_DEBOUNCE_MS * 1000;


> +
>  	info->edev = devm_extcon_dev_allocate(dev, usb_extcon_cable);
>  	if (IS_ERR(info->edev)) {
>  		dev_err(dev, "failed to allocate extcon device\n");
> @@ -147,13 +153,13 @@ static int usb_extcon_probe(struct platform_device *pdev)
>  
>  	if (info->id_gpiod)
>  		ret = gpiod_set_debounce(info->id_gpiod,
> -					 USB_GPIO_DEBOUNCE_MS * 1000);
> +					 info->debounce_usecs * 1000);

The debounce_usecs is already microsecond, You don't need to mutiply with 1000.


>  	if (!ret && info->vbus_gpiod)
>  		ret = gpiod_set_debounce(info->vbus_gpiod,
> -					 USB_GPIO_DEBOUNCE_MS * 1000);
> +					 info->debounce_usecs * 1000);
>  
>  	if (ret < 0)
> -		info->debounce_jiffies = msecs_to_jiffies(USB_GPIO_DEBOUNCE_MS);
> +		info->debounce_jiffies = msecs_to_jiffies(info->debounce_usecs);

ditto.

>  
>  	INIT_DELAYED_WORK(&info->wq_detcable, usb_extcon_detect_cable);
>  
> 


-- 
Best Regards,
Chanwoo Choi
Samsung Electronics