Re: [PATCH] PCI: v3-semi: print resources using %pR format string

From: Bjorn Helgaas
Date: Fri Oct 20 2017 - 13:24:51 EST


On Wed, Oct 11, 2017 at 04:02:09PM +0200, Arnd Bergmann wrote:
> A resource_size_t can be 32 or 64 bit on arm32, causing a number
> of warnings for incorrect format strings:
>
> In file included from include/linux/printk.h:327:0,
> from include/linux/kernel.h:13,
> from include/linux/interrupt.h:5,
> from drivers/pci/host/pci-v3-semi.c:19:
> drivers/pci/host/pci-v3-semi.c: In function 'v3_pci_setup_resource':
> drivers/pci/host/pci-v3-semi.c:536:4: error: format '%x' expects argument of type 'unsigned int', but argument 5 has type 'phys_addr_t {aka long long unsigned int}' [-Werror=format=]
> "I/O window start %08x, bus addr %08x, size %08x\n",
> drivers/pci/host/pci-v3-semi.c:536:4: error: format '%x' expects argument of type 'unsigned int', but argument 6 has type 'resource_size_t {aka long long unsigned int}' [-Werror=format=]
>
> The best way to print this instead is to pass the resource itself
> to printk as a pointerm, using the special '%pR' format string
> for pretty-printing the range.
>
> For the bus address, we use %pap, respectively.
>
> Fixes: 132d10e24ff3 ("PCI: v3-semi: Add V3 Semiconductor PCI host driver")
> Signed-off-by: Arnd Bergmann <arnd@xxxxxxxx>

I folded this into Linus' original patch, since it hasn't been sent
upstream yet. Thanks!

> ---
> drivers/pci/host/pci-v3-semi.c | 24 +++++++++---------------
> 1 file changed, 9 insertions(+), 15 deletions(-)
>
> diff --git a/drivers/pci/host/pci-v3-semi.c b/drivers/pci/host/pci-v3-semi.c
> index a544d722aef1..02f6e1e3a421 100644
> --- a/drivers/pci/host/pci-v3-semi.c
> +++ b/drivers/pci/host/pci-v3-semi.c
> @@ -532,10 +532,8 @@ static int v3_pci_setup_resource(struct v3_pci *v3,
> io->name = "V3 PCI I/O";
> v3->io_mem = io_base;
> v3->io_bus_addr = io->start - win->offset;
> - dev_dbg(dev,
> - "I/O window start %08x, bus addr %08x, size %08x\n",
> - v3->io_mem, v3->io_bus_addr,
> - resource_size(io));
> + dev_dbg(dev, "I/O window %pR, bus addr %pap\n",
> + io, &v3->io_bus_addr);
> ret = pci_remap_iospace(io, io_base);
> if (ret) {
> dev_warn(dev,
> @@ -556,9 +554,8 @@ static int v3_pci_setup_resource(struct v3_pci *v3,
> mem->name = "V3 PCI PRE-MEM";
> v3->pre_mem = mem->start;
> v3->pre_bus_addr = mem->start - win->offset;
> - dev_dbg(dev, "PREFETCHABLE MEM window start %08x, bus addr %08x, size %08x\n",
> - v3->pre_mem, v3->pre_bus_addr,
> - resource_size(mem));
> + dev_dbg(dev, "PREFETCHABLE MEM window %pR, bus addr %pap\n",
> + mem, &v3->pre_bus_addr);
> if (resource_size(mem) != SZ_256M) {
> dev_err(dev, "prefetchable memory range is not 256MB\n");
> return -EINVAL;
> @@ -582,10 +579,8 @@ static int v3_pci_setup_resource(struct v3_pci *v3,
> mem->name = "V3 PCI NON-PRE-MEM";
> v3->non_pre_mem = mem->start;
> v3->non_pre_bus_addr = mem->start - win->offset;
> - dev_dbg(dev,
> - "NON-PREFETCHABLE MEM window start %08x, bus addr %08x, size %08x\n",
> - v3->non_pre_mem, v3->non_pre_bus_addr,
> - resource_size(mem));
> + dev_dbg(dev, "NON-PREFETCHABLE MEM window %pR, bus addr %pap\n",
> + mem, &v3->non_pre_bus_addr);
> if (resource_size(mem) != SZ_256M) {
> dev_err(dev,
> "non-prefetchable memory range is not 256MB\n");
> @@ -602,7 +597,7 @@ static int v3_pci_setup_resource(struct v3_pci *v3,
> }
> break;
> case IORESOURCE_BUS:
> - dev_dbg(dev, "BUS %d\n", win->res->start);
> + dev_dbg(dev, "BUS %pR\n", win->res);
> host->busnr = win->res->start;
> break;
> default:
> @@ -781,9 +776,8 @@ static int v3_pci_probe(struct platform_device *pdev)
> * as the physical memory we've remapped it from.
> */
> if (readl(v3->base + V3_LB_IO_BASE) != (regs->start >> 16))
> - dev_err(dev, "V3_LB_IO_BASE = %08x but device is @%08x\n",
> - readl(v3->base + V3_LB_IO_BASE),
> - regs->start);
> + dev_err(dev, "V3_LB_IO_BASE = %08x but device is @%pR\n",
> + readl(v3->base + V3_LB_IO_BASE), regs);
>
> /* Configuration space is 16MB directly mapped */
> regs = platform_get_resource(pdev, IORESOURCE_MEM, 1);
> --
> 2.9.0
>