Re: [PATCH 03/10 v3] usb: usb251xb: Add USB251x specific port count setting

[Richard Leitner]

On 10/22/2017 10:38 PM, Serge Semin wrote:
> USB251xb as well as USB2517 datasheet states, that all these
> hubs differ by number of ports declared as the last digit in the
> model name. So USB2512 got two ports, USB2513 - three, and so on.
> Such setting must be reflected in the device specific data
> structure and corresponding dts property should be checked whether
> it doesn't get out of available ports.
>
> Signed-off-by: Serge Semin <fancer.lancer@xxxxxxxxx>
> ---
>   drivers/usb/misc/usb251xb.c | 24 +++++++++++++++++++++---
>   1 file changed, 21 insertions(+), 3 deletions(-)

...
> @@ -422,8 +431,11 @@ static int usb251xb_get_ofdata(struct usb251xb *hub,
>   		for (i = 0; i < len / sizeof(u32); i++) {
>   			u32 port = be32_to_cpu(cproperty_u32[i]);
>   
> -			if ((port >= 1) && (port <= 4))
> +			if ((port >= 1) && (port <= data->port_cnt))
>   				hub->non_rem_dev |= BIT(port);
> +			else
> +				dev_warn(dev, "NRD port %u doesn't exist\n",
> +					port);

Please match the alignment of the second line with the open parenthesis.

>   		}
>   	}
>   
> @@ -433,8 +445,11 @@ static int usb251xb_get_ofdata(struct usb251xb *hub,
>   		for (i = 0; i < len / sizeof(u32); i++) {
>   			u32 port = be32_to_cpu(cproperty_u32[i]);
>   
> -			if ((port >= 1) && (port <= 4))
> +			if ((port >= 1) && (port <= data->port_cnt))
>   				hub->port_disable_sp |= BIT(port);
> +			else
> +				dev_warn(dev, "PDS port %u doesn't exist\n",
> +					port);

... same here ...

>   		}
>   	}
>   
> @@ -444,8 +459,11 @@ static int usb251xb_get_ofdata(struct usb251xb *hub,
>   		for (i = 0; i < len / sizeof(u32); i++) {
>   			u32 port = be32_to_cpu(cproperty_u32[i]);
>   
> -			if ((port >= 1) && (port <= 4))
> +			if ((port >= 1) && (port <= data->port_cnt))
>   				hub->port_disable_bp |= BIT(port);
> +			else
> +				dev_warn(dev, "PDB port %u doesn't exist\n",
> +					port);

... and here.

>   		}
>   	}

Otherwise feel free to add:

Acked-by: Richard Leitner <richard.leitner@xxxxxxxxxxx>

regards,
Richard.L