[PATCH] staging: VME: Remove PIO2 driver
From: Martyn Welch
Date: Tue Oct 24 2017 - 04:21:08 EST
The PIO2 device is (as far as I know) no longer manufactured. I no longer
have access to the device and this seems unlikely to change. The only
changes to this driver in a long time have been as a result of API changes
else where. Time to remove it...
Signed-off-by: Martyn Welch <martyn.welch@xxxxxxxxxxxxxxx>
---
drivers/staging/vme/devices/Kconfig | 13 -
drivers/staging/vme/devices/Makefile | 3 -
drivers/staging/vme/devices/vme_pio2.h | 244 --------------
drivers/staging/vme/devices/vme_pio2_cntr.c | 71 ----
drivers/staging/vme/devices/vme_pio2_core.c | 493 ----------------------------
drivers/staging/vme/devices/vme_pio2_gpio.c | 220 -------------
6 files changed, 1044 deletions(-)
delete mode 100644 drivers/staging/vme/devices/vme_pio2.h
delete mode 100644 drivers/staging/vme/devices/vme_pio2_cntr.c
delete mode 100644 drivers/staging/vme/devices/vme_pio2_core.c
delete mode 100644 drivers/staging/vme/devices/vme_pio2_gpio.c
diff --git a/drivers/staging/vme/devices/Kconfig b/drivers/staging/vme/devices/Kconfig
index 1d2ff0cc41f1..c548dd8c91e1 100644
--- a/drivers/staging/vme/devices/Kconfig
+++ b/drivers/staging/vme/devices/Kconfig
@@ -10,16 +10,3 @@ config VME_USER
To compile this driver as a module, choose M here. The module will
be called vme_user. If unsure, say N.
-
-config VME_PIO2
- tristate "GE PIO2 VME"
- depends on STAGING && GPIOLIB
- help
- Say Y here to include support for the GE PIO2. The PIO2 is a 6U VME
- slave card, implementing 32 solid-state relay switched IO lines, in
- 4 groups of 8. Each bank of IO lines is built to function as input,
- output or both depending on the variant of the card.
-
- To compile this driver as a module, choose M here. The module will
- be called vme_pio2. If unsure, say N.
-
diff --git a/drivers/staging/vme/devices/Makefile b/drivers/staging/vme/devices/Makefile
index 172512cb5dbf..459742a75283 100644
--- a/drivers/staging/vme/devices/Makefile
+++ b/drivers/staging/vme/devices/Makefile
@@ -3,6 +3,3 @@
#
obj-$(CONFIG_VME_USER) += vme_user.o
-
-vme_pio2-objs := vme_pio2_cntr.o vme_pio2_gpio.o vme_pio2_core.o
-obj-$(CONFIG_VME_PIO2) += vme_pio2.o
diff --git a/drivers/staging/vme/devices/vme_pio2.h b/drivers/staging/vme/devices/vme_pio2.h
deleted file mode 100644
index ac4a4bad4091..000000000000
--- a/drivers/staging/vme/devices/vme_pio2.h
+++ /dev/null
@@ -1,244 +0,0 @@
-#ifndef _VME_PIO2_H_
-#define _VME_PIO2_H_
-
-#define PIO2_CARDS_MAX 32
-
-#define PIO2_VARIANT_LENGTH 5
-
-#define PIO2_NUM_CHANNELS 32
-#define PIO2_NUM_IRQS 11
-#define PIO2_NUM_CNTRS 6
-
-#define PIO2_REGS_SIZE 0x40
-
-#define PIO2_REGS_DATA0 0x0
-#define PIO2_REGS_DATA1 0x1
-#define PIO2_REGS_DATA2 0x2
-#define PIO2_REGS_DATA3 0x3
-
-static const int PIO2_REGS_DATA[4] = { PIO2_REGS_DATA0, PIO2_REGS_DATA1,
- PIO2_REGS_DATA2, PIO2_REGS_DATA3 };
-
-#define PIO2_REGS_INT_STAT0 0x8
-#define PIO2_REGS_INT_STAT1 0x9
-#define PIO2_REGS_INT_STAT2 0xa
-#define PIO2_REGS_INT_STAT3 0xb
-
-static const int PIO2_REGS_INT_STAT[4] = { PIO2_REGS_INT_STAT0,
- PIO2_REGS_INT_STAT1,
- PIO2_REGS_INT_STAT2,
- PIO2_REGS_INT_STAT3 };
-
-#define PIO2_REGS_INT_STAT_CNTR 0xc
-#define PIO2_REGS_INT_MASK0 0x10
-#define PIO2_REGS_INT_MASK1 0x11
-#define PIO2_REGS_INT_MASK2 0x12
-#define PIO2_REGS_INT_MASK3 0x13
-#define PIO2_REGS_INT_MASK4 0x14
-#define PIO2_REGS_INT_MASK5 0x15
-#define PIO2_REGS_INT_MASK6 0x16
-#define PIO2_REGS_INT_MASK7 0x17
-
-static const int PIO2_REGS_INT_MASK[8] = { PIO2_REGS_INT_MASK0,
- PIO2_REGS_INT_MASK1,
- PIO2_REGS_INT_MASK2,
- PIO2_REGS_INT_MASK3,
- PIO2_REGS_INT_MASK4,
- PIO2_REGS_INT_MASK5,
- PIO2_REGS_INT_MASK6,
- PIO2_REGS_INT_MASK7 };
-
-#define PIO2_REGS_CTRL 0x18
-#define PIO2_REGS_VME_VECTOR 0x19
-#define PIO2_REGS_CNTR0 0x20
-#define PIO2_REGS_CNTR1 0x22
-#define PIO2_REGS_CNTR2 0x24
-#define PIO2_REGS_CTRL_WRD0 0x26
-#define PIO2_REGS_CNTR3 0x28
-#define PIO2_REGS_CNTR4 0x2a
-#define PIO2_REGS_CNTR5 0x2c
-#define PIO2_REGS_CTRL_WRD1 0x2e
-
-#define PIO2_REGS_ID 0x30
-
-/* PIO2_REGS_DATAx (0x0 - 0x3) */
-
-static const int PIO2_CHANNEL_BANK[32] = { 0, 0, 0, 0, 0, 0, 0, 0,
- 1, 1, 1, 1, 1, 1, 1, 1,
- 2, 2, 2, 2, 2, 2, 2, 2,
- 3, 3, 3, 3, 3, 3, 3, 3 };
-
-#define PIO2_CHANNEL0_BIT BIT(0)
-#define PIO2_CHANNEL1_BIT BIT(1)
-#define PIO2_CHANNEL2_BIT BIT(2)
-#define PIO2_CHANNEL3_BIT BIT(3)
-#define PIO2_CHANNEL4_BIT BIT(4)
-#define PIO2_CHANNEL5_BIT BIT(5)
-#define PIO2_CHANNEL6_BIT BIT(6)
-#define PIO2_CHANNEL7_BIT BIT(7)
-#define PIO2_CHANNEL8_BIT BIT(0)
-#define PIO2_CHANNEL9_BIT BIT(1)
-#define PIO2_CHANNEL10_BIT BIT(2)
-#define PIO2_CHANNEL11_BIT BIT(3)
-#define PIO2_CHANNEL12_BIT BIT(4)
-#define PIO2_CHANNEL13_BIT BIT(5)
-#define PIO2_CHANNEL14_BIT BIT(6)
-#define PIO2_CHANNEL15_BIT BIT(7)
-#define PIO2_CHANNEL16_BIT BIT(0)
-#define PIO2_CHANNEL17_BIT BIT(1)
-#define PIO2_CHANNEL18_BIT BIT(2)
-#define PIO2_CHANNEL19_BIT BIT(3)
-#define PIO2_CHANNEL20_BIT BIT(4)
-#define PIO2_CHANNEL21_BIT BIT(5)
-#define PIO2_CHANNEL22_BIT BIT(6)
-#define PIO2_CHANNEL23_BIT BIT(7)
-#define PIO2_CHANNEL24_BIT BIT(0)
-#define PIO2_CHANNEL25_BIT BIT(1)
-#define PIO2_CHANNEL26_BIT BIT(2)
-#define PIO2_CHANNEL27_BIT BIT(3)
-#define PIO2_CHANNEL28_BIT BIT(4)
-#define PIO2_CHANNEL29_BIT BIT(5)
-#define PIO2_CHANNEL30_BIT BIT(6)
-#define PIO2_CHANNEL31_BIT BIT(7)
-
-static const int PIO2_CHANNEL_BIT[32] = { PIO2_CHANNEL0_BIT, PIO2_CHANNEL1_BIT,
- PIO2_CHANNEL2_BIT, PIO2_CHANNEL3_BIT,
- PIO2_CHANNEL4_BIT, PIO2_CHANNEL5_BIT,
- PIO2_CHANNEL6_BIT, PIO2_CHANNEL7_BIT,
- PIO2_CHANNEL8_BIT, PIO2_CHANNEL9_BIT,
- PIO2_CHANNEL10_BIT, PIO2_CHANNEL11_BIT,
- PIO2_CHANNEL12_BIT, PIO2_CHANNEL13_BIT,
- PIO2_CHANNEL14_BIT, PIO2_CHANNEL15_BIT,
- PIO2_CHANNEL16_BIT, PIO2_CHANNEL17_BIT,
- PIO2_CHANNEL18_BIT, PIO2_CHANNEL19_BIT,
- PIO2_CHANNEL20_BIT, PIO2_CHANNEL21_BIT,
- PIO2_CHANNEL22_BIT, PIO2_CHANNEL23_BIT,
- PIO2_CHANNEL24_BIT, PIO2_CHANNEL25_BIT,
- PIO2_CHANNEL26_BIT, PIO2_CHANNEL27_BIT,
- PIO2_CHANNEL28_BIT, PIO2_CHANNEL29_BIT,
- PIO2_CHANNEL30_BIT, PIO2_CHANNEL31_BIT
- };
-
-/* PIO2_REGS_INT_STAT_CNTR (0xc) */
-#define PIO2_COUNTER0 BIT(0)
-#define PIO2_COUNTER1 BIT(1)
-#define PIO2_COUNTER2 BIT(2)
-#define PIO2_COUNTER3 BIT(3)
-#define PIO2_COUNTER4 BIT(4)
-#define PIO2_COUNTER5 BIT(5)
-
-static const int PIO2_COUNTER[6] = { PIO2_COUNTER0, PIO2_COUNTER1,
- PIO2_COUNTER2, PIO2_COUNTER3,
- PIO2_COUNTER4, PIO2_COUNTER5 };
-
-/* PIO2_REGS_CTRL (0x18) */
-#define PIO2_VME_INT_MASK 0x7
-#define PIO2_LED BIT(6)
-#define PIO2_LOOP BIT(7)
-
-/* PIO2_REGS_VME_VECTOR (0x19) */
-#define PIO2_VME_VECTOR_SPUR 0x0
-#define PIO2_VME_VECTOR_BANK0 0x1
-#define PIO2_VME_VECTOR_BANK1 0x2
-#define PIO2_VME_VECTOR_BANK2 0x3
-#define PIO2_VME_VECTOR_BANK3 0x4
-#define PIO2_VME_VECTOR_CNTR0 0x5
-#define PIO2_VME_VECTOR_CNTR1 0x6
-#define PIO2_VME_VECTOR_CNTR2 0x7
-#define PIO2_VME_VECTOR_CNTR3 0x8
-#define PIO2_VME_VECTOR_CNTR4 0x9
-#define PIO2_VME_VECTOR_CNTR5 0xa
-
-#define PIO2_VME_VECTOR_MASK 0xf0
-
-static const int PIO2_VECTOR_BANK[4] = { PIO2_VME_VECTOR_BANK0,
- PIO2_VME_VECTOR_BANK1,
- PIO2_VME_VECTOR_BANK2,
- PIO2_VME_VECTOR_BANK3 };
-
-static const int PIO2_VECTOR_CNTR[6] = { PIO2_VME_VECTOR_CNTR0,
- PIO2_VME_VECTOR_CNTR1,
- PIO2_VME_VECTOR_CNTR2,
- PIO2_VME_VECTOR_CNTR3,
- PIO2_VME_VECTOR_CNTR4,
- PIO2_VME_VECTOR_CNTR5 };
-
-/* PIO2_REGS_CNTRx (0x20 - 0x24 & 0x28 - 0x2c) */
-
-static const int PIO2_CNTR_DATA[6] = { PIO2_REGS_CNTR0, PIO2_REGS_CNTR1,
- PIO2_REGS_CNTR2, PIO2_REGS_CNTR3,
- PIO2_REGS_CNTR4, PIO2_REGS_CNTR5 };
-
-/* PIO2_REGS_CTRL_WRDx (0x26 & 0x2e) */
-
-static const int PIO2_CNTR_CTRL[6] = { PIO2_REGS_CTRL_WRD0,
- PIO2_REGS_CTRL_WRD0,
- PIO2_REGS_CTRL_WRD0,
- PIO2_REGS_CTRL_WRD1,
- PIO2_REGS_CTRL_WRD1,
- PIO2_REGS_CTRL_WRD1 };
-
-#define PIO2_CNTR_SC_DEV0 0
-#define PIO2_CNTR_SC_DEV1 (1 << 6)
-#define PIO2_CNTR_SC_DEV2 (2 << 6)
-#define PIO2_CNTR_SC_RDBACK (3 << 6)
-
-static const int PIO2_CNTR_SC_DEV[6] = { PIO2_CNTR_SC_DEV0, PIO2_CNTR_SC_DEV1,
- PIO2_CNTR_SC_DEV2, PIO2_CNTR_SC_DEV0,
- PIO2_CNTR_SC_DEV1, PIO2_CNTR_SC_DEV2 };
-
-#define PIO2_CNTR_RW_LATCH 0
-#define PIO2_CNTR_RW_LSB (1 << 4)
-#define PIO2_CNTR_RW_MSB (2 << 4)
-#define PIO2_CNTR_RW_BOTH (3 << 4)
-
-#define PIO2_CNTR_MODE0 0
-#define PIO2_CNTR_MODE1 (1 << 1)
-#define PIO2_CNTR_MODE2 (2 << 1)
-#define PIO2_CNTR_MODE3 (3 << 1)
-#define PIO2_CNTR_MODE4 (4 << 1)
-#define PIO2_CNTR_MODE5 (5 << 1)
-
-#define PIO2_CNTR_BCD 1
-
-enum pio2_bank_config { NOFIT, INPUT, OUTPUT, BOTH };
-enum pio2_int_config { NONE = 0, LOW2HIGH = 1, HIGH2LOW = 2, EITHER = 4 };
-
-/* Bank configuration structure */
-struct pio2_io_bank {
- enum pio2_bank_config config;
- u8 value;
- enum pio2_int_config irq[8];
-};
-
-/* Counter configuration structure */
-struct pio2_cntr {
- int mode;
- int count;
-};
-
-struct pio2_card {
- int id;
- int bus;
- long base;
- int irq_vector;
- int irq_level;
- char variant[6];
- int led;
-
- struct vme_dev *vdev;
- struct vme_resource *window;
-
- struct gpio_chip gc;
- struct pio2_io_bank bank[4];
-
- struct pio2_cntr cntr[6];
-};
-
-int pio2_cntr_reset(struct pio2_card *card);
-
-int pio2_gpio_reset(struct pio2_card *card);
-int pio2_gpio_init(struct pio2_card *card);
-void pio2_gpio_exit(struct pio2_card *card);
-
-#endif /* _VME_PIO2_H_ */
diff --git a/drivers/staging/vme/devices/vme_pio2_cntr.c b/drivers/staging/vme/devices/vme_pio2_cntr.c
deleted file mode 100644
index 486c30c4956f..000000000000
--- a/drivers/staging/vme/devices/vme_pio2_cntr.c
+++ /dev/null
@@ -1,71 +0,0 @@
-/*
- * GE PIO2 Counter Driver
- *
- * Author: Martyn Welch <martyn.welch@xxxxxx>
- * Copyright 2009 GE Intelligent Platforms Embedded Systems, Inc.
- *
- * This program is free software; you can redistribute it and/or modify it
- * under the terms of the GNU General Public License as published by the
- * Free Software Foundation; either version 2 of the License, or (at your
- * option) any later version.
- *
- * The PIO-2 has 6 counters, currently this code just disables the interrupts
- * and leaves them alone.
- *
- */
-
-#include <linux/device.h>
-#include <linux/types.h>
-#include <linux/gpio.h>
-#include <linux/vme.h>
-
-#include "vme_pio2.h"
-
-static int pio2_cntr_irq_set(struct pio2_card *card, int id)
-{
- int retval;
- u8 data;
-
- data = PIO2_CNTR_SC_DEV[id] | PIO2_CNTR_RW_BOTH | card->cntr[id].mode;
- retval = vme_master_write(card->window, &data, 1, PIO2_CNTR_CTRL[id]);
- if (retval < 0)
- return retval;
-
- data = card->cntr[id].count & 0xFF;
- retval = vme_master_write(card->window, &data, 1, PIO2_CNTR_DATA[id]);
- if (retval < 0)
- return retval;
-
- data = (card->cntr[id].count >> 8) & 0xFF;
- retval = vme_master_write(card->window, &data, 1, PIO2_CNTR_DATA[id]);
- if (retval < 0)
- return retval;
-
- return 0;
-}
-
-int pio2_cntr_reset(struct pio2_card *card)
-{
- int i, retval = 0;
- u8 reg;
-
- /* Clear down all timers */
- for (i = 0; i < 6; i++) {
- card->cntr[i].mode = PIO2_CNTR_MODE5;
- card->cntr[i].count = 0;
- retval = pio2_cntr_irq_set(card, i);
- if (retval < 0)
- return retval;
- }
-
- /* Ensure all counter interrupts are cleared */
- do {
- retval = vme_master_read(card->window, ®, 1,
- PIO2_REGS_INT_STAT_CNTR);
- if (retval < 0)
- return retval;
- } while (reg != 0);
-
- return retval;
-}
-
diff --git a/drivers/staging/vme/devices/vme_pio2_core.c b/drivers/staging/vme/devices/vme_pio2_core.c
deleted file mode 100644
index 367535b4b77f..000000000000
--- a/drivers/staging/vme/devices/vme_pio2_core.c
+++ /dev/null
@@ -1,493 +0,0 @@
-/*
- * GE PIO2 6U VME I/O Driver
- *
- * Author: Martyn Welch <martyn.welch@xxxxxx>
- * Copyright 2009 GE Intelligent Platforms Embedded Systems, Inc.
- *
- * This program is free software; you can redistribute it and/or modify it
- * under the terms of the GNU General Public License as published by the
- * Free Software Foundation; either version 2 of the License, or (at your
- * option) any later version.
- */
-
-#define pr_fmt(fmt) KBUILD_MODNAME ": " fmt
-
-#include <linux/module.h>
-#include <linux/types.h>
-#include <linux/kernel.h>
-#include <linux/errno.h>
-#include <linux/device.h>
-#include <linux/ctype.h>
-#include <linux/gpio.h>
-#include <linux/slab.h>
-#include <linux/vme.h>
-
-#include "vme_pio2.h"
-
-static const char driver_name[] = "pio2";
-
-static int bus[PIO2_CARDS_MAX];
-static int bus_num;
-static long base[PIO2_CARDS_MAX];
-static int base_num;
-static int vector[PIO2_CARDS_MAX];
-static int vector_num;
-static int level[PIO2_CARDS_MAX];
-static int level_num;
-static char *variant[PIO2_CARDS_MAX];
-static int variant_num;
-
-static bool loopback;
-
-static int pio2_match(struct vme_dev *);
-static int pio2_probe(struct vme_dev *);
-static int pio2_remove(struct vme_dev *);
-
-static int pio2_get_led(struct pio2_card *card)
-{
- /* Can't read hardware, state saved in structure */
- return card->led;
-}
-
-static int pio2_set_led(struct pio2_card *card, int state)
-{
- u8 reg;
- int retval;
-
- reg = card->irq_level;
-
- /* Register state inverse of led state */
- if (!state)
- reg |= PIO2_LED;
-
- if (loopback)
- reg |= PIO2_LOOP;
-
- retval = vme_master_write(card->window, ®, 1, PIO2_REGS_CTRL);
- if (retval < 0)
- return retval;
-
- card->led = state ? 1 : 0;
-
- return 0;
-}
-
-static void pio2_int(int level, int vector, void *ptr)
-{
- int vec, i, channel, retval;
- u8 reg;
- struct pio2_card *card = ptr;
-
- vec = vector & ~PIO2_VME_VECTOR_MASK;
-
- switch (vec) {
- case 0:
- dev_warn(&card->vdev->dev, "Spurious Interrupt\n");
- break;
- case 1:
- case 2:
- case 3:
- case 4:
- /* Channels 0 to 7 */
- retval = vme_master_read(card->window, ®, 1,
- PIO2_REGS_INT_STAT[vec - 1]);
- if (retval < 0) {
- dev_err(&card->vdev->dev,
- "Unable to read IRQ status register\n");
- return;
- }
- for (i = 0; i < 8; i++) {
- channel = ((vec - 1) * 8) + i;
- if (reg & PIO2_CHANNEL_BIT[channel])
- dev_info(&card->vdev->dev,
- "Interrupt on I/O channel %d\n",
- channel);
- }
- break;
- case 5:
- case 6:
- case 7:
- case 8:
- case 9:
- case 10:
- /* Counters are dealt with by their own handler */
- dev_err(&card->vdev->dev,
- "Counter interrupt\n");
- break;
- }
-}
-
-/*
- * We return whether this has been successful - this is used in the probe to
- * ensure we have a valid card.
- */
-static int pio2_reset_card(struct pio2_card *card)
-{
- int retval = 0;
- u8 data = 0;
-
- /* Clear main register*/
- retval = vme_master_write(card->window, &data, 1, PIO2_REGS_CTRL);
- if (retval < 0)
- return retval;
-
- /* Clear VME vector */
- retval = vme_master_write(card->window, &data, 1, PIO2_REGS_VME_VECTOR);
- if (retval < 0)
- return retval;
-
- /* Reset GPIO */
- retval = pio2_gpio_reset(card);
- if (retval < 0)
- return retval;
-
- /* Reset counters */
- retval = pio2_cntr_reset(card);
- if (retval < 0)
- return retval;
-
- return 0;
-}
-
-static struct vme_driver pio2_driver = {
- .name = driver_name,
- .match = pio2_match,
- .probe = pio2_probe,
- .remove = pio2_remove,
-};
-
-static int __init pio2_init(void)
-{
- if (bus_num == 0) {
- pr_err("No cards, skipping registration\n");
- return -ENODEV;
- }
-
- if (bus_num > PIO2_CARDS_MAX) {
- pr_err("Driver only able to handle %d PIO2 Cards\n",
- PIO2_CARDS_MAX);
- bus_num = PIO2_CARDS_MAX;
- }
-
- /* Register the PIO2 driver */
- return vme_register_driver(&pio2_driver, bus_num);
-}
-
-static int pio2_match(struct vme_dev *vdev)
-{
- if (vdev->num >= bus_num) {
- dev_err(&vdev->dev,
- "The enumeration of the VMEbus to which the board is connected must be specified\n");
- return 0;
- }
-
- if (vdev->num >= base_num) {
- dev_err(&vdev->dev,
- "The VME address for the cards registers must be specified\n");
- return 0;
- }
-
- if (vdev->num >= vector_num) {
- dev_err(&vdev->dev,
- "The IRQ vector used by the card must be specified\n");
- return 0;
- }
-
- if (vdev->num >= level_num) {
- dev_err(&vdev->dev,
- "The IRQ level used by the card must be specified\n");
- return 0;
- }
-
- if (vdev->num >= variant_num) {
- dev_err(&vdev->dev, "The variant of the card must be specified\n");
- return 0;
- }
-
- return 1;
-}
-
-static int pio2_probe(struct vme_dev *vdev)
-{
- struct pio2_card *card;
- int retval;
- int i;
- u8 reg;
- int vec;
-
- card = devm_kzalloc(&vdev->dev, sizeof(*card), GFP_KERNEL);
- if (!card)
- return -ENOMEM;
-
- card->id = vdev->num;
- card->bus = bus[card->id];
- card->base = base[card->id];
- card->irq_vector = vector[card->id];
- card->irq_level = level[card->id] & PIO2_VME_INT_MASK;
- strncpy(card->variant, variant[card->id], PIO2_VARIANT_LENGTH);
- card->vdev = vdev;
-
- for (i = 0; i < PIO2_VARIANT_LENGTH; i++) {
- if (!isdigit(card->variant[i])) {
- dev_err(&card->vdev->dev, "Variant invalid\n");
- return -EINVAL;
- }
- }
-
- /*
- * Bottom 4 bits of VME interrupt vector used to determine source,
- * provided vector should only use upper 4 bits.
- */
- if (card->irq_vector & ~PIO2_VME_VECTOR_MASK) {
- dev_err(&card->vdev->dev,
- "Invalid VME IRQ Vector, vector must not use lower 4 bits\n");
- return -EINVAL;
- }
-
- /*
- * There is no way to determine the build variant or whether each bank
- * is input, output or both at run time. The inputs are also inverted
- * if configured as both.
- *
- * We pass in the board variant and use that to determine the
- * configuration of the banks.
- */
- for (i = 1; i < PIO2_VARIANT_LENGTH; i++) {
- switch (card->variant[i]) {
- case '0':
- card->bank[i - 1].config = NOFIT;
- break;
- case '1':
- case '2':
- case '3':
- case '4':
- card->bank[i - 1].config = INPUT;
- break;
- case '5':
- card->bank[i - 1].config = OUTPUT;
- break;
- case '6':
- case '7':
- case '8':
- case '9':
- card->bank[i - 1].config = BOTH;
- break;
- }
- }
-
- /* Get a master window and position over regs */
- card->window = vme_master_request(vdev, VME_A24, VME_SCT, VME_D16);
- if (!card->window) {
- dev_err(&card->vdev->dev,
- "Unable to assign VME master resource\n");
- return -EIO;
- }
-
- retval = vme_master_set(card->window, 1, card->base, 0x10000, VME_A24,
- VME_SCT | VME_USER | VME_DATA, VME_D16);
- if (retval) {
- dev_err(&card->vdev->dev,
- "Unable to configure VME master resource\n");
- goto err_set;
- }
-
- /*
- * There is also no obvious register which we can probe to determine
- * whether the provided base is valid. If we can read the "ID Register"
- * offset and the reset function doesn't error, assume we have a valid
- * location.
- */
- retval = vme_master_read(card->window, ®, 1, PIO2_REGS_ID);
- if (retval < 0) {
- dev_err(&card->vdev->dev, "Unable to read from device\n");
- goto err_read;
- }
-
- dev_dbg(&card->vdev->dev, "ID Register:%x\n", reg);
-
- /*
- * Ensure all the I/O is cleared. We can't read back the states, so
- * this is the only method we have to ensure that the I/O is in a known
- * state.
- */
- retval = pio2_reset_card(card);
- if (retval) {
- dev_err(&card->vdev->dev,
- "Failed to reset card, is location valid?\n");
- retval = -ENODEV;
- goto err_reset;
- }
-
- /* Configure VME Interrupts */
- reg = card->irq_level;
- if (pio2_get_led(card))
- reg |= PIO2_LED;
- if (loopback)
- reg |= PIO2_LOOP;
- retval = vme_master_write(card->window, ®, 1, PIO2_REGS_CTRL);
- if (retval < 0)
- return retval;
-
- /* Set VME vector */
- retval = vme_master_write(card->window, &card->irq_vector, 1,
- PIO2_REGS_VME_VECTOR);
- if (retval < 0)
- return retval;
-
- /* Attach spurious interrupt handler. */
- vec = card->irq_vector | PIO2_VME_VECTOR_SPUR;
-
- retval = vme_irq_request(vdev, card->irq_level, vec,
- &pio2_int, card);
- if (retval < 0) {
- dev_err(&card->vdev->dev,
- "Unable to attach VME interrupt vector0x%x, level 0x%x\n",
- vec, card->irq_level);
- goto err_irq;
- }
-
- /* Attach GPIO interrupt handlers. */
- for (i = 0; i < 4; i++) {
- vec = card->irq_vector | PIO2_VECTOR_BANK[i];
-
- retval = vme_irq_request(vdev, card->irq_level, vec,
- &pio2_int, card);
- if (retval < 0) {
- dev_err(&card->vdev->dev,
- "Unable to attach VME interrupt vector0x%x, level 0x%x\n",
- vec, card->irq_level);
- goto err_gpio_irq;
- }
- }
-
- /* Attach counter interrupt handlers. */
- for (i = 0; i < 6; i++) {
- vec = card->irq_vector | PIO2_VECTOR_CNTR[i];
-
- retval = vme_irq_request(vdev, card->irq_level, vec,
- &pio2_int, card);
- if (retval < 0) {
- dev_err(&card->vdev->dev,
- "Unable to attach VME interrupt vector0x%x, level 0x%x\n",
- vec, card->irq_level);
- goto err_cntr_irq;
- }
- }
-
- /* Register IO */
- retval = pio2_gpio_init(card);
- if (retval < 0) {
- dev_err(&card->vdev->dev,
- "Unable to register with GPIO framework\n");
- goto err_gpio;
- }
-
- /* Set LED - This also sets interrupt level */
- retval = pio2_set_led(card, 0);
- if (retval < 0) {
- dev_err(&card->vdev->dev, "Unable to set LED\n");
- goto err_led;
- }
-
- dev_set_drvdata(&card->vdev->dev, card);
-
- dev_info(&card->vdev->dev,
- "PIO2 (variant %s) configured at 0x%lx\n", card->variant,
- card->base);
-
- return 0;
-
-err_led:
- pio2_gpio_exit(card);
-err_gpio:
- i = 6;
-err_cntr_irq:
- while (i > 0) {
- i--;
- vec = card->irq_vector | PIO2_VECTOR_CNTR[i];
- vme_irq_free(vdev, card->irq_level, vec);
- }
-
- i = 4;
-err_gpio_irq:
- while (i > 0) {
- i--;
- vec = card->irq_vector | PIO2_VECTOR_BANK[i];
- vme_irq_free(vdev, card->irq_level, vec);
- }
-
- vec = (card->irq_vector & PIO2_VME_VECTOR_MASK) | PIO2_VME_VECTOR_SPUR;
- vme_irq_free(vdev, card->irq_level, vec);
-err_irq:
- pio2_reset_card(card);
-err_reset:
-err_read:
- vme_master_set(card->window, 0, 0, 0, VME_A16, 0, VME_D16);
-err_set:
- vme_master_free(card->window);
- return retval;
-}
-
-static int pio2_remove(struct vme_dev *vdev)
-{
- int vec;
- int i;
-
- struct pio2_card *card = dev_get_drvdata(&vdev->dev);
-
- pio2_gpio_exit(card);
-
- for (i = 0; i < 6; i++) {
- vec = card->irq_vector | PIO2_VECTOR_CNTR[i];
- vme_irq_free(vdev, card->irq_level, vec);
- }
-
- for (i = 0; i < 4; i++) {
- vec = card->irq_vector | PIO2_VECTOR_BANK[i];
- vme_irq_free(vdev, card->irq_level, vec);
- }
-
- vec = (card->irq_vector & PIO2_VME_VECTOR_MASK) | PIO2_VME_VECTOR_SPUR;
- vme_irq_free(vdev, card->irq_level, vec);
-
- pio2_reset_card(card);
-
- vme_master_set(card->window, 0, 0, 0, VME_A16, 0, VME_D16);
-
- vme_master_free(card->window);
-
- return 0;
-}
-
-static void __exit pio2_exit(void)
-{
- vme_unregister_driver(&pio2_driver);
-}
-
-/* These are required for each board */
-MODULE_PARM_DESC(bus, "Enumeration of VMEbus to which the board is connected");
-module_param_hw_array(bus, int, other, &bus_num, 0444);
-
-MODULE_PARM_DESC(base, "Base VME address for PIO2 Registers");
-module_param_hw_array(base, long, other, &base_num, 0444);
-
-MODULE_PARM_DESC(vector, "VME IRQ Vector (Lower 4 bits masked)");
-module_param_hw_array(vector, int, other, &vector_num, 0444);
-
-MODULE_PARM_DESC(level, "VME IRQ Level");
-module_param_hw_array(level, int, other, &level_num, 0444);
-
-MODULE_PARM_DESC(variant, "Last 4 characters of PIO2 board variant");
-module_param_array(variant, charp, &variant_num, 0444);
-
-/* This is for debugging */
-MODULE_PARM_DESC(loopback, "Enable loopback mode on all cards");
-module_param(loopback, bool, 0444);
-
-MODULE_DESCRIPTION("GE PIO2 6U VME I/O Driver");
-MODULE_AUTHOR("Martyn Welch <martyn.welch@xxxxxx");
-MODULE_LICENSE("GPL");
-
-module_init(pio2_init);
-module_exit(pio2_exit);
-
diff --git a/drivers/staging/vme/devices/vme_pio2_gpio.c b/drivers/staging/vme/devices/vme_pio2_gpio.c
deleted file mode 100644
index ba9fe3bc2642..000000000000
--- a/drivers/staging/vme/devices/vme_pio2_gpio.c
+++ /dev/null
@@ -1,220 +0,0 @@
-/*
- * GE PIO2 GPIO Driver
- *
- * Author: Martyn Welch <martyn.welch@xxxxxx>
- * Copyright 2009 GE Intelligent Platforms Embedded Systems, Inc.
- *
- * This program is free software; you can redistribute it and/or modify it
- * under the terms of the GNU General Public License as published by the
- * Free Software Foundation; either version 2 of the License, or (at your
- * option) any later version.
- */
-
-#include <linux/module.h>
-#include <linux/types.h>
-#include <linux/kernel.h>
-#include <linux/errno.h>
-#include <linux/device.h>
-#include <linux/platform_device.h>
-#include <linux/ctype.h>
-#include <linux/gpio/driver.h>
-#include <linux/slab.h>
-#include <linux/vme.h>
-
-#include "vme_pio2.h"
-
-static const char driver_name[] = "pio2_gpio";
-
-static int pio2_gpio_get(struct gpio_chip *chip, unsigned int offset)
-{
- u8 reg;
- int retval;
- struct pio2_card *card = gpiochip_get_data(chip);
-
- if ((card->bank[PIO2_CHANNEL_BANK[offset]].config == OUTPUT) |
- (card->bank[PIO2_CHANNEL_BANK[offset]].config == NOFIT)) {
- dev_err(&card->vdev->dev, "Channel not available as input\n");
- return 0;
- }
-
- retval = vme_master_read(card->window, ®, 1,
- PIO2_REGS_DATA[PIO2_CHANNEL_BANK[offset]]);
- if (retval < 0) {
- dev_err(&card->vdev->dev, "Unable to read from GPIO\n");
- return 0;
- }
-
- /*
- * Remember, input on channels configured as both input and output
- * are inverted!
- */
- if (reg & PIO2_CHANNEL_BIT[offset]) {
- if (card->bank[PIO2_CHANNEL_BANK[offset]].config != BOTH)
- return 0;
-
- return 1;
- }
-
- if (card->bank[PIO2_CHANNEL_BANK[offset]].config != BOTH)
- return 1;
-
- return 0;
-}
-
-static void pio2_gpio_set(struct gpio_chip *chip,
- unsigned int offset, int value)
-{
- u8 reg;
- int retval;
- struct pio2_card *card = gpiochip_get_data(chip);
-
- if ((card->bank[PIO2_CHANNEL_BANK[offset]].config == INPUT) |
- (card->bank[PIO2_CHANNEL_BANK[offset]].config == NOFIT)) {
- dev_err(&card->vdev->dev, "Channel not available as output\n");
- return;
- }
-
- if (value)
- reg = card->bank[PIO2_CHANNEL_BANK[offset]].value |
- PIO2_CHANNEL_BIT[offset];
- else
- reg = card->bank[PIO2_CHANNEL_BANK[offset]].value &
- ~PIO2_CHANNEL_BIT[offset];
-
- retval = vme_master_write(card->window, ®, 1,
- PIO2_REGS_DATA[PIO2_CHANNEL_BANK[offset]]);
- if (retval < 0) {
- dev_err(&card->vdev->dev, "Unable to write to GPIO\n");
- return;
- }
-
- card->bank[PIO2_CHANNEL_BANK[offset]].value = reg;
-}
-
-/* Directionality configured at board build - send appropriate response */
-static int pio2_gpio_dir_in(struct gpio_chip *chip, unsigned int offset)
-{
- int data;
- struct pio2_card *card = gpiochip_get_data(chip);
-
- if ((card->bank[PIO2_CHANNEL_BANK[offset]].config == OUTPUT) |
- (card->bank[PIO2_CHANNEL_BANK[offset]].config == NOFIT)) {
- dev_err(&card->vdev->dev,
- "Channel directionality not configurable at runtime\n");
-
- data = -EINVAL;
- } else {
- data = 0;
- }
-
- return data;
-}
-
-/* Directionality configured at board build - send appropriate response */
-static int pio2_gpio_dir_out(struct gpio_chip *chip,
- unsigned int offset, int value)
-{
- int data;
- struct pio2_card *card = gpiochip_get_data(chip);
-
- if ((card->bank[PIO2_CHANNEL_BANK[offset]].config == INPUT) |
- (card->bank[PIO2_CHANNEL_BANK[offset]].config == NOFIT)) {
- dev_err(&card->vdev->dev,
- "Channel directionality not configurable at runtime\n");
-
- data = -EINVAL;
- } else {
- data = 0;
- }
-
- return data;
-}
-
-/*
- * We return whether this has been successful - this is used in the probe to
- * ensure we have a valid card.
- */
-int pio2_gpio_reset(struct pio2_card *card)
-{
- int retval = 0;
- int i, j;
-
- u8 data = 0;
-
- /* Zero output registers */
- for (i = 0; i < 4; i++) {
- retval = vme_master_write(card->window, &data, 1,
- PIO2_REGS_DATA[i]);
- if (retval < 0)
- return retval;
- card->bank[i].value = 0;
- }
-
- /* Set input interrupt masks */
- for (i = 0; i < 4; i++) {
- retval = vme_master_write(card->window, &data, 1,
- PIO2_REGS_INT_MASK[i * 2]);
- if (retval < 0)
- return retval;
-
- retval = vme_master_write(card->window, &data, 1,
- PIO2_REGS_INT_MASK[(i * 2) + 1]);
- if (retval < 0)
- return retval;
-
- for (j = 0; j < 8; j++)
- card->bank[i].irq[j] = NONE;
- }
-
- /* Ensure all I/O interrupts are cleared */
- for (i = 0; i < 4; i++) {
- do {
- retval = vme_master_read(card->window, &data, 1,
- PIO2_REGS_INT_STAT[i]);
- if (retval < 0)
- return retval;
- } while (data != 0);
- }
-
- return 0;
-}
-
-int pio2_gpio_init(struct pio2_card *card)
-{
- int retval = 0;
- char *label;
-
- label = kasprintf(GFP_KERNEL,
- "%s@%s", driver_name, dev_name(&card->vdev->dev));
- if (!label)
- return -ENOMEM;
-
- card->gc.label = label;
-
- card->gc.ngpio = PIO2_NUM_CHANNELS;
- /* Dynamic allocation of base */
- card->gc.base = -1;
- /* Setup pointers to chip functions */
- card->gc.direction_input = pio2_gpio_dir_in;
- card->gc.direction_output = pio2_gpio_dir_out;
- card->gc.get = pio2_gpio_get;
- card->gc.set = pio2_gpio_set;
-
- /* This function adds a memory mapped GPIO chip */
- retval = gpiochip_add_data(&card->gc, card);
- if (retval) {
- dev_err(&card->vdev->dev, "Unable to register GPIO\n");
- kfree(card->gc.label);
- }
-
- return retval;
-};
-
-void pio2_gpio_exit(struct pio2_card *card)
-{
- const char *label = card->gc.label;
-
- gpiochip_remove(&card->gc);
- kfree(label);
-}
-
--
2.11.0