RE: [PATCH] hp_accel: Add accelerometer quirk for HP ProBook 440 G4
From: Osama Khan
Date: Mon Oct 30 2017 - 02:10:25 EST
Thanks for reviewing the patch. I'll keep your feedback in mind for future submissions.
-----Original Message-----
From: platform-driver-x86-owner@xxxxxxxxxxxxxxx [mailto:platform-driver-x86-owner@xxxxxxxxxxxxxxx] On Behalf Of Andy Shevchenko
Sent: Friday, October 27, 2017 9:31 PM
To: Osama Khan <osama.khan@xxxxxxxxxxxx>
Cc: eric.piel@xxxxxxxxxxxxxxxx; platform-driver-x86@xxxxxxxxxxxxxxx; linux-kernel@xxxxxxxxxxxxxxx
Subject: Re: [PATCH] hp_accel: Add accelerometer quirk for HP ProBook 440 G4
On Sat, Oct 21, 2017 at 1:42 PM, Osama Khan <osama.khan@xxxxxxxxxxxx> wrote:
> Added support for HP ProBook 440 G4 laptops by including the
> accelerometer orientation quirk for that device. Testing was performed
> based on the axis orientation guidelines here:
> https://www.kernel.org/doc/Documentation/misc-devices/lis3lv02d
> which states "If the left side is elevated, X increases (becomes positive)"
>
> When tested, on lifting the left edge, x values became increasingly
> negative thus indicating an inverted x-axis on the installed lis3lv02d chip.
> This was compensated by adding an entry for this device in hp_accel.c
> specifying the quirk as x_inverted. The patch was tested on a ProBook
> 440 G4 device and x-axis as well as y and z-axis values are now
> generated as per spec.
>
Thanks for the patch.
First of all, indentation is mangled and it doesn't clearly applies.
Second, we use a prefix platform/x86 for patches against PDx86 subsystem.
P.S. No need to resend this time, just check your mail client and be aware about the prefix in the future.
> Signed-off-by: Osama Khan <osama.khan@xxxxxxxxxxxx>
> ---
> diff --git a/drivers/platform/x86/hp_accel.c
> b/drivers/platform/x86/hp_accel.c index 493d8910a74e..7b12abe86b94
> 100644
> --- a/drivers/platform/x86/hp_accel.c
> +++ b/drivers/platform/x86/hp_accel.c
> @@ -240,6 +240,7 @@ static const struct dmi_system_id lis3lv02d_dmi_ids[] = {
> AXIS_DMI_MATCH("HDX18", "HP HDX 18", x_inverted),
> AXIS_DMI_MATCH("HPB432x", "HP ProBook 432", xy_rotated_left),
> AXIS_DMI_MATCH("HPB440G3", "HP ProBook 440 G3",
> x_inverted_usd),
> + AXIS_DMI_MATCH("HPB440G4", "HP ProBook 440 G4", x_inverted),
> AXIS_DMI_MATCH("HPB442x", "HP ProBook 442", xy_rotated_left),
> AXIS_DMI_MATCH("HPB452x", "HP ProBook 452", y_inverted),
> AXIS_DMI_MATCH("HPB522x", "HP ProBook 522", xy_swap),
--
With Best Regards,
Andy Shevchenko