[PATCH v2 13/17] bindings: PCI: artpec: Add support for endpoint mode

[Niklas Cassel]

Signed-off-by: Niklas Cassel <niklas.cassel@xxxxxxxx>
Acked-by: Rob Herring <robh@xxxxxxxxxx>
---
V2:
* Split out the DT binding change to a self contained patch.
* Added Rob's ack (from V1). No change to this file since V1.

 Documentation/devicetree/bindings/pci/axis,artpec6-pcie.txt | 3 ++-
 1 file changed, 2 insertions(+), 1 deletion(-)

diff --git a/Documentation/devicetree/bindings/pci/axis,artpec6-pcie.txt b/Documentation/devicetree/bindings/pci/axis,artpec6-pcie.txt
index 4e4aee4439ea..33eef7ae5a23 100644
--- a/Documentation/devicetree/bindings/pci/axis,artpec6-pcie.txt
+++ b/Documentation/devicetree/bindings/pci/axis,artpec6-pcie.txt
@@ -4,7 +4,8 @@ This PCIe host controller is based on the Synopsys DesignWare PCIe IP
 and thus inherits all the common properties defined in designware-pcie.txt.
 
 Required properties:
-- compatible: "axis,artpec6-pcie", "snps,dw-pcie"
+- compatible: "axis,artpec6-pcie", "snps,dw-pcie" for ARTPEC-6 in RC mode;
+	      "axis,artpec6-pcie-ep", "snps,dw-pcie" for ARTPEC-6 in EP mode;
 - reg: base addresses and lengths of the PCIe controller (DBI),
 	the PHY controller, and configuration address space.
 - reg-names: Must include the following entries:
-- 
2.14.2