Re: [PATCH 2/8] PCI: host: brcmstb: add DT docs for Brcmstb PCIe device

[Jonas Gorski]

Hi,

On 24 October 2017 at 20:15, Jim Quinlan <jim2101024@xxxxxxxxx> wrote:
> The DT bindings description of the Brcmstb PCIe device is described.  This
> node can be used by almost all Broadcom settop box chips, using
> ARM, ARM64, or MIPS CPU architectures.
>
> Signed-off-by: Jim Quinlan <jim2101024@xxxxxxxxx>
> ---
>  .../devicetree/bindings/pci/brcmstb-pci.txt        | 63 ++++++++++++++++++++++
>  1 file changed, 63 insertions(+)
>  create mode 100644 Documentation/devicetree/bindings/pci/brcmstb-pci.txt
>
> diff --git a/Documentation/devicetree/bindings/pci/brcmstb-pci.txt b/Documentation/devicetree/bindings/pci/brcmstb-pci.txt
> new file mode 100644
> index 0000000..49f9852
> --- /dev/null
> +++ b/Documentation/devicetree/bindings/pci/brcmstb-pci.txt
> @@ -0,0 +1,63 @@
> +Brcmstb PCIe Host Controller Device Tree Bindings
> +
> +Required Properties:
> +- compatible
> +  "brcm,bcm7425-pcie" -- for 7425 family MIPS-based SOCs.
> +  "brcm,bcm7435-pcie" -- for 7435 family MIPS-based SOCs.
> +  "brcm,bcm7445-pcie" -- for 7445 and later ARM based SOCs (not including
> +      the 7278).
> +  "brcm,bcm7278-pcie"  -- for 7278 family ARM-based SOCs.
> +

(snip)

> +
> +Example Node:
> +
> +pcie0: pcie@f0460000 {
> +               reg = <0x0 0xf0460000 0x0 0x9310>;
> +               interrupts = <0x0 0x0 0x4>;
> +               compatible = "brcm,pci-plat-dev";

This is not one of the valid compatibles mentioned above.


Regards
Jonas